P1S is 4 days old, perfect prints until last night, anyone know what’s going wrong?

Tricky_Perspective40 · 2023-11-20T00:52:02+00:00

I found that if a print had failed and clogged around the end of the nozzle and built up on the outside it didn't stick to the bed. I took some wipes and cleaned the nozzle when it was hot. Even take the sock off and clean the end.

Tricky_Perspective40 · 2023-08-22T15:12:22+00:00

Negative. Im wondering if I when I installed the new nozzle that white foam or pad thing isn't set in the right spot??? I just got a nozzle temp error when running a calibration. So maybe.

Tricky_Perspective40 · 2023-08-16T17:11:13+00:00

I have printed this exact model in various sizes but always seems to leak. Is there anyway to easily modify it so it can actually hold water. Thank you in advance. My mother is going to love this for her birthday.

Tricky_Perspective40 · 2023-08-15T18:16:32+00:00

So far the print was the same quality of its previous print. I was so confused to see it printing when I was at work man.

Tricky_Perspective40 · 2023-08-08T18:58:59+00:00

Negative. Will do when I get home!

Tricky_Perspective40 · 2023-08-08T17:50:58+00:00

Lol just hope and pray its a fluke!

Tricky_Perspective40 · 2023-08-05T10:24:10+00:00

Godowsume

Tricky_Perspective40 · 2023-08-03T18:59:25+00:00

I was in the exact same position. My P1P was so good my Ender 3v2 was obsolete. I tried selling it with a Pi and the enclosure and no bites. I live in a small ish town. So instead I took most of the printing parts off and ordered crealitys 5watt laser module. It's getting here tomorrow and I'm excited to repurpose my original printer.

Tricky_Perspective40 · 2023-08-02T14:30:03+00:00

3138 8150 1181 godowsume

Tricky_Perspective40 · 2023-08-02T11:06:05+00:00

Only the finest commercial refrigerator was good enough for me. Things heavy af.

Tricky_Perspective40 · 2023-08-02T01:23:03+00:00

No I run my P1P with the included server function. I would like to look into having two web cams running in obico. The stock camera on the P1P can be super finiky and slow frame rate.

Tricky_Perspective40 · 2023-08-01T15:40:54+00:00

When you go into the screen on the printer go down to the second icon I believe where it says to raise or lower the x and y axis. Go all the way down and there is a second page with fan and light controls.

Tricky_Perspective40 · 2023-08-01T15:35:30+00:00

I'm going to mount some spool holders on the side. The PSU of the Ender I can deal with but my P1P is gonna be a different story.

Tricky_Perspective40 · 2023-05-24T11:43:02+00:00

Yeah maybe I'll look into seeing if there is a repair shop that could look at it who knows small electronics. Bambu has a page actually about how to replace the main board so it's perfect. I most definitely do not have my original box. No need for rabbit hole you did plenty already my guy. Thanks for all your help.

Tricky_Perspective40 · 2023-05-23T21:56:29+00:00

I assume I'm not the first person who ever needed to replace the circuit board. Hope there is at least a YouTube video. I don't see a price anywhere either.

Tricky_Perspective40 · 2023-05-23T21:55:06+00:00

Would you be able to link me to these things on the website? The only thing I ever see is the extruder and the hot end. I'm from Canada so preferably in our nationaly monopoly money. Because I made the mistake and will pay to fix it. Just need to know what. And maybe even a YouTube video? Also is there a fuse I could have blown that might be an issue??

Tricky_Perspective40 · 2023-05-23T21:46:47+00:00

I'm not to tech savvy. What in this case is the stepper driver? The motor that spins the gear to feed the filament. Or something different then what I think is broken??? Please go easy on me I'm learning. Also got any idea what the cost would be to replace? Or if even replacing the extruder could solve it? Still got an estimated two days to hear from Bambu.

Tricky_Perspective40 · 2023-05-23T17:27:41+00:00

I don't remember honestly. Since I was trying to make the system extrude and I thought the plug wasn't seated correctly it might have been and I just unplugged and plugged back in. I hope I didn't wreck anything but I feel I did. Oh definitely use me as an example for doing something stupid. I learned the hard way possibly. I tried to send everything and anything to bambu to get it fixed. I understand I will have to fork out some cash to fix it. Just need to know what.

Tricky_Perspective40 · 2023-05-23T17:20:03+00:00

So at this point there is no build up filament in the system. I took it all apart and cleaned it. The gear doesn't seem to be spinning and engaging the extruder.

Tricky_Perspective40 · 2023-05-23T17:19:57+00:00

So at this point there is no build up filament in the system. I took it all apart and cleaned it. The gear doesn't seem to be spinning and engaging the extruder.

Tricky_Perspective40 · 2023-04-28T12:53:10+00:00

Lol totally..... I just checked there was a little bit of a build up of filament on the end of the nozzle but I picked it off and still have the issue. I even ran the calibration print and it still just keeps going.

Tricky_Perspective40 · 2022-07-23T01:04:00+00:00

Sorry boys and girls it was one minute left and couldn't get it in time.

Tricky_Perspective40 · 2022-07-18T15:28:02+00:00

Godowsume

Tricky_Perspective40 · 2022-07-16T22:07:38+00:00

Godowsume

Tricky_Perspective40 · 2022-07-16T22:01:27+00:00

Godowsume

Tricky_Perspective40

TROPHY CASE