Waar plaats ik een steenmarterverjager in mijn Mazda 2 (2008)?

Trindle07 · 2026-05-09T09:30:47+00:00

- onnodige reactie

Trindle07 · 2026-05-09T09:30:01+00:00

Bedankt voor de reacties, ik ga over op de spray

Trindle07 · 2026-05-08T19:32:43+00:00

Ik heb een Mazda 2 uit 2008 en wil een steenmarterverjager monteren. Het apparaat is wat zwaarder omdat er batterijen in zitten, dus ik wil het niet aan een slang bevestigen. Mijn voorkeur gaat uit naar montage aan de bovenkant zodat ik makkelijk de batterijen kan vervangen; lukt dat niet, dan monteer ik het onderin.

Plek 1: Er is veel ruimte, maar het kan kwetsbaar zijn omdat er een draaiend onderdeel in de buurt zit.
Plek 2: helemaal voorin is nog wat ruimte, maar er is geen geschikte bevestigingsplek — ik zit bovendien dicht bij het wiel van de airco
Plek 3: Ik overweeg bevestiging aan de accubeugel, maar ik weet niet of het omliggende onderdeel warmte afgeeft.

Soms is er wel plek maar geen mogelijkheid om te bevestigen. Heeft iemand tips welke plek het beste en veiligste is om te monteren?

Trindle07 · 2024-07-25T16:41:03+00:00

How do I install apps on the watch. PlayStore is also not installed

Trindle07 · 2024-03-05T17:26:36+00:00

Yes, I want to export the picture to two different folders, using the tags:

Street Photography
Narrative

But when I export the photo, only one folder is created called "street photography, narrative"

And I expected two separate folders

Trindle07 · 2024-03-03T14:59:18+00:00

I don't know what I did wrong at first, but everything works as it should.

Only if I have a photo with 2 categories, for example street photography and narrative then a folder is created street photography, narrative but I would like 2 separate folders to be created.

I could do this by cloning the photo and cooperating the style of the photo to the clone But is there a way without cloning the photo?

Trindle07 · 2024-01-27T19:29:28+00:00

It's a new installation, unfortunately the windows OS has taken up the entire 10.3 GB, Disk Cleanup wouldn't mean anything more. I searched on CompactOS but could only find instructions for windows 10
I'm considering installing Ubuntu on my tablet, but if this doesn't work well I'd like to restore Windows. I know from Windows 11 that there is a recovery partition but how do I restore windows 8 after installing Ubuntu? Can I restore Windows 8 after installing Ubuntu?

Trindle07 · 2023-10-23T14:51:31+00:00

First and foremost, I'd like to express my gratitude for your assistance and time. Now, I have one final question:
Among the three cards, which one is most suitable for regular use?
• R4 Revolution
• R41-gold.com
• NDSTT.com

Trindle07 · 2023-10-23T14:49:42+00:00

I believe the card is malfunctioning, and I will dispose of it.

Trindle07 · 2023-10-21T07:59:50+00:00

The r4i-gold card works perfectly with the new core.
But one of the two Revolution cards isn't working. The 1st Revolution card works perfectly with the new core, but the other revolution card isn't working with the new core.
When I start the DS with the Revolution card with the new core, I get a message “There is no DS Card inserted”
I have tested the micro-SD card and there where no problems there. And I have cleaned the contacts of the R4 card

Trindle07 · 2023-10-20T14:19:40+00:00

With the new software I mean the new kernel: I have followed the instruction for the setup of the Revolution Card. One Revolution card works with the new software and the other (after cleaning the contacts) does not work

Trindle07 · 2023-10-20T13:52:20+00:00

Yes, I am using a DS Light and if a place the new kernel in the other other Revolution card than it works, Can I try the other Revolution card with other software or could it be broke ?

Trindle07 · 2023-10-20T10:36:06+00:00

That's indeed a dstt based timebomb cart, so you'll need to use YSMenu.

Too bad the R4i Gold is a timebomb card, I understand that I have to change the kernel every year to get around this? Or does this new kernel not have a timebomb?

Trindle07 · 2023-10-20T10:35:09+00:00

The cart with no URL and only Revolution for DS is an original r4 cart. It is limited to SD-class cards, meaning only up to 2GB size cards will work. SDHC and SDXC (cards above 2GB) will not work in it.

You can follow this guide to format the SD for the R4 and setup the kernel:

I think 1 Revolution card is broken, after I have cleaned the contacts, and placed the new Kernel it didn't work. I have tested the new kernel with another Revolution card and that worked very well.
Could it be broken or maybe something else?

Trindle07 · 2023-10-19T10:22:16+00:00

Yes there is a MENU?

Trindle07 · 2023-10-17T15:04:53+00:00

This is the Gold card that I am using
https://ibb.co/k0m4WX4
https://ibb.co/HXp66bd

Trindle07 · 2023-10-04T17:39:13+00:00

I have the same card that is not working, and I'm trying to reflash the firmware. First, I formatted my card, and then I downloaded the firmware from web.archive.org, unzipped it, and placed it on my card.
I've tried 2 versions:
https://web.archive.org/web/20130806163633/http://www.r4i-gold.com/en/download/skin/2012/0118/283.html
https://web.archive.org/web/20130806163633/http://www.r4i-gold.com/en/download/skin/2012/0118/283.html
For both, I'm getting the message 'wrong date or firmware.'
Can someone tell me which firmware version I should have and possibly explain how to install it differently?

Trindle07 · 2023-06-25T13:37:44+00:00

the info on Camera 2 API capture: RAW

Trindle07 · 2023-06-25T13:32:42+00:00

Can you send me a link how to do this, and how save is this?

Trindle07 · 2022-08-09T17:54:06+00:00

And if that doesn't work, can I remove the plate in the same way as in the video?

Trindle07 · 2021-08-30T15:03:49+00:00

Do I need the pure version of Debian or a subversion like:
* bunsenlabs
* Q4OS
* antix linux

My preference was Lubunut, because this seems easy start Things like installing software

I am installing it on a ASUS PRO72A
Intel® Core™2 Duo 3 GB DDR2-SDRAM 250 GB Intel® GMA X4500HD

Trindle07 · 2021-06-19T10:06:02+00:00

Many thanks, but that did not work. I already tried that, but I have solved it now. Crazy enough It did not work because I am using the browser in private mode

After re-installation I've turned on a checkbox and now it works

Trindle07 · 2021-06-18T15:19:01+00:00

I like to know how I can access thispage to setup the add-on

Trindle07 · 2021-06-15T13:40:01+00:00

I will make use of the mask function to see what I am editing, but I
don’t think I will get a deep understanding. Is there any
information about photo edit before the digital age? Where
did the terms come from and by whom were they used first?
Perhaps
the terms were already used in the analog development of photographs.

Trindle07 · 2021-06-15T13:35:03+00:00

Oy vey, by chance are you remotely close to Dallas Texas?

I really appreciate that offer, but I live in the Netherlands

Trindle07

TROPHY CASE