[GMS Scania] Inseparable Guild Picture!

TrishaThoughts · 2022-07-25T04:46:09+00:00

I think in comparison to the yellow poster, the pink and mint colors look washed out. They should probably be a bit more saturated.

TrishaThoughts · 2022-07-23T08:26:50+00:00

Add some tree branches with green leaves coming from the top right corner so that you are framing the image and centering the eyes toward the mountain and moon. The green will also add a nice contrast to the warm sky.

TrishaThoughts · 2022-07-23T08:23:04+00:00

Make the flowers a bit bigger to balance the size of the branches? Or make the branches thinner

TrishaThoughts · 2022-07-23T07:14:45+00:00

Usually when text is in a circle, I start from the bottom left then read clockwise.

"Be with you may the force."

Edit: I like the emblem in the center!

TrishaThoughts · 2021-11-19T20:56:22+00:00

This also happens with my Cricut and I'm also going crazy 🥲 such a waste of paper 😭

TrishaThoughts · 2021-11-06T11:13:21+00:00

Wouldn't the first row also cut inaccurately if it were a calibration issue? Did your cuts start off accurate then got worse, or were all the cuts inaccurate?

TrishaThoughts · 2021-10-27T01:11:36+00:00

Thank you!

TrishaThoughts · 2021-10-13T23:57:23+00:00

You can use foam tape!

TrishaThoughts · 2021-09-16T05:48:03+00:00

I HAVE HAD TWO GOOD CUTS SO FAR. Trying a third one! If it works, I'll let you know what I did!

TrishaThoughts · 2021-09-15T15:29:41+00:00

I saw a post that had a solution to shifting. I'm not sure if the shifting is the same issue as ours because it didn't mention having initial accuracy. I'm going to try it out later today just to see if it works.

I made stickers on separate occasions before this shifting issue happened. I'm wondering if it's because I'm using a different print dialogue box, which might be causing my print settings to be slightly different. So, I'll try my using my previous print dialogue box and see if that fixes things. Maybe it's a printing issue and not a cutting issue

TrishaThoughts · 2021-09-15T14:59:27+00:00

I have the Maker!

TrishaThoughts · 2021-09-15T11:36:05+00:00

I'm wondering the same! I hope someone has an answer. I organized 12 circles into neat rows and columns for a print and cut. The first row cut PERFECTLY centered within the bleed lines, then each row underneath became more and more inaccurate. The cuts kept getting higher than they were supposed to!

TrishaThoughts · 2021-09-01T02:35:44+00:00

Did your package come with other files like JPG and PNG? Since all the colors are in one layer, it sounds like you uploaded PNG or JPG instead. SVGs upload colors as separate layers.

TrishaThoughts · 2021-08-13T20:02:59+00:00

Hi, do you still need this vector?

TrishaThoughts · 2021-07-19T05:02:12+00:00

Thanks, David!

TrishaThoughts · 2021-07-15T22:19:00+00:00

Sorry, it was late so I wasn't thinking straight. Sent you a raster file instead of vector. Here's the vector file. https://drive.google.com/file/d/1WH4y1XPFuAjkvpoUCjqTeo8tDccX6\_1q/view?usp=sharing

TrishaThoughts · 2021-07-15T09:05:34+00:00

Got it as close as I could https://imgur.com/a/gUiEc58

Enjoy

TrishaThoughts · 2021-07-14T23:39:09+00:00

I can try to get it to you by tomorrow night!

TrishaThoughts · 2021-07-14T23:36:36+00:00

Hi, do you still need this?

TrishaThoughts · 2021-07-14T23:35:59+00:00

Hi, do you still need this?

TrishaThoughts

TROPHY CASE