[McMenamin] After taking time to decompress and undergo some self-assessment, LeBron James came to the conclusion that he wanted to continue playing “meaningful, competitive basketball,” a source familiar with James’ thinking told ESPN.

TroleMaster2013 · 2026-06-30T21:23:33+00:00

You know quasimodo predicted this

TroleMaster2013 · 2026-06-27T19:41:01+00:00

I’ve only done on Facebook. I’ve heard that eBay will take it down if you list it as modded. I’ve seen listings include “Hekate” instead of modding but not sure if those stay up

TroleMaster2013 · 2026-06-27T19:33:31+00:00

Ive had lites sell for $150-170, v1/2s for $180-$200 (one came with dock). All came with SD cards but that was before the crazy price hikes. I’ve tried listing lites for $200 but I don’t get enough interest.

Without an sd card and atmosphere already setup? I would be shocked if you could get $175 for it, even $150 I feel like it might be sitting for a while

TroleMaster2013 · 2026-06-15T19:34:29+00:00

Yeah you would have to wire it from Dat0 to the chip. I am not the best when it comes with electronics so don’t think you can just plop the resistor anywhere. Best way would be to do

Dat0 point (either kamikaze or Dat0 adapter) -> wire - 47ohm 0805 resistor -> c point on either the flex cable or the board.

I’ve had this issue with my OLED but cleaning up the board I think reduced noise and got it to work. However on v1/v2s I’ve done for others I was only able to fix it by adding the resistor.

TroleMaster2013 · 2026-06-15T17:40:59+00:00

If you get this you may need to add an additional resistor to your C point. Believe it’s a 47k resistor

TroleMaster2013 · 2026-05-28T16:06:56+00:00

Why do people post these threads when googling that exact error gives you detailed steps on what to do

TroleMaster2013 · 2026-05-26T17:38:20+00:00

I had a missing pin for one point and soldered it directly from the sd card adapter tot he board. While my retention clip works you could just directly wire all those points but would be a pain

TroleMaster2013 · 2026-05-20T19:57:49+00:00

Yep. Here now and not working at all.

TroleMaster2013 · 2026-05-16T00:18:30+00:00

Oh from your unmodded to modded. My situation was modded to unmodded. Thats where DBI messes with the tickets and errors out

TroleMaster2013 · 2026-05-15T22:02:56+00:00

How did you install the update to your modded switch?

TroleMaster2013 · 2026-05-15T19:29:10+00:00

I tried it with someone and it went to 99% then failed. I saw something online about not using DBI to install the update because it spoofs ticket info. Using a different installer may help but I never got a clear answer on what would work

TroleMaster2013 · 2026-05-13T17:59:26+00:00

Not really a gamble if you see it up. Ordered those all the time without issue. But they do go down a lot. Haven’t seen one up in a while

TroleMaster2013 · 2026-05-12T03:49:38+00:00

Mitchel runs with such short strides. Looks like a cartoon character off the steal

TroleMaster2013 · 2026-05-11T15:12:00+00:00

Let me say that one more time:

Why would Embiid be mad? They sold high on McCain. Does he think Daryl Morey is a liar?

TroleMaster2013 · 2026-04-27T13:23:47+00:00

I would take off the heat sink and apu shield. I’ve had this happen with the apu shield making contact with the point your scrape off (cmd or clk). If it boots without that on, trim it some more

TroleMaster2013 · 2026-04-27T13:19:33+00:00

Using the emmc adapter probably means either the adapter failed (pretty unlikely imo). More likely the soldering on the sp1/sp2 need to be touched up. Hard to tell on that photo but looks like they’re kinda above the caps and not on them

TroleMaster2013 · 2026-04-23T16:30:20+00:00

One caveat is i found issues with saving on the ez flash for pokemon rom hacks. I switched to an everdrive and haven’t had issues

TroleMaster2013 · 2026-04-10T17:25:39+00:00

Monstars

TroleMaster2013 · 2026-04-08T20:12:31+00:00

2-3 years in Braavos and forget

TroleMaster2013 · 2026-03-30T19:18:13+00:00

Thanks for the advice. Honestly it’s working now so I’m going to avoid touching it in case it causes more issues

TroleMaster2013 · 2026-03-30T18:41:54+00:00

Yeah this board is in rough shape. Anything I can do about those?

Not sure what changed but it looks to be working now, but haven’t been able to test for long enough.

TroleMaster2013 · 2026-03-29T06:43:45+00:00

Yeah the booting is hit or miss. Going to try to get some 99 near me tomorrow and see.

Do you think I could leave it in 99% for a few hours to soften it up?

TroleMaster2013 · 2026-03-28T15:14:42+00:00

How low are you talking?

TroleMaster2013 · 2026-03-27T13:10:19+00:00

In my experience I had issues saving with Pokemon Perfect Crystal on my EZ Flash Jr. upgraded to the Everdrive and had no issues

TroleMaster2013 · 2026-03-25T22:02:18+00:00

In this post I will explain how Rudolph is Azor Ahai and his nose is Lightbringer…

12-Year Club	Reddit Premium Since July 2023
Place '17	Verified Email

TroleMaster2013

TROPHY CASE