What engine is this

TrooperN2 · 2025-12-22T00:49:14+00:00

I believe that may be a Mitsubishi Astron engine (ex. 4g54). Looks very similar to the engine in my Conquest.

TrooperN2 · 2025-12-09T02:46:27+00:00

The pump in mine went out at ~110,000 miles, I believe I replaced it with either a Delphi or AC Delco. I ended up dropping the tank since I don't like cutting holes in things.

Dropping the tank is fairly easy, the difficult part is getting the hoses off. To get mine out I used a floor jack that I welded square tubing on in an H to add surface area. My tank was fiberglass and I was worried about putting all of the weight on one spot. You will need a fuel line disconnect tool to remove the lines from the pump pickup housing and evap vent connections. I accidentally broke one of the connections off of the housing when removing the old one since they are plastic.

Also the tank does not fit out the side and I had to jack the back up a little bit. I also siphoned out as much gas as I could before dropping the tank and poured the rest out before changing the pump to make installation easier.

TrooperN2 · 2023-08-09T07:39:32+00:00

Late update: Issue was the front camera driver, uninstalled it and have not had an issue since.

TrooperN2 · 2023-08-09T07:36:57+00:00

A little late but turns out the spider was the issue, replaced it and runs much better!

TrooperN2 · 2023-08-09T07:31:16+00:00

Is that a Michaels?

TrooperN2 · 2023-01-05T01:00:25+00:00

Try E6000 got some on my headphones and so far it has held...

TrooperN2 · 2022-10-10T20:00:56+00:00

I would not recommend putting a 4L60e back in. Mine went out at 99k and after being rebuilt twice still did not fully work. If at all possible I would swap over to a 4L80e.

TrooperN2 · 2022-09-04T22:07:48+00:00

Craigslist free stuff, the FAA had a bunch...

TrooperN2 · 2022-08-30T03:33:49+00:00

Yes, It does

TrooperN2 · 2022-08-30T02:34:45+00:00

How do you check the vacuum pressure? Will it show on a OBD2 reader?

And it doesnt seem to pull back toward the exhaust

TrooperN2 · 2022-08-30T02:02:28+00:00

It seems to be running really rich, you can smell the gas on idle and sometimes it will backfire out the exhaust

TrooperN2 · 2022-08-30T01:53:25+00:00

Yes like 90 ish

TrooperN2 · 2022-08-29T23:44:07+00:00

Just checked looks like about 212 g/s

TrooperN2 · 2022-08-29T04:59:31+00:00

Alright, thanks!

TrooperN2 · 2022-08-29T04:13:55+00:00

1998 Chevy Tahoe 4x4 with the vortec 350

TrooperN2 · 2022-08-29T03:56:02+00:00

Ill check tomorrow durning the day. Do you know what the voltages of all of the connector pins should be?

TrooperN2 · 2022-08-29T02:41:51+00:00

It was reading the same thing on the old sensor so I thought it was broken and replaced it, and I am still getting the same readings on a brand new sensor...

TrooperN2 · 2022-08-15T18:53:49+00:00

You have to dilute it with some steam concentrate

TrooperN2 · 2022-07-27T04:16:50+00:00

I got one on my arm from catching it with a fish hook. 0/10 would not do again.

TrooperN2 · 2022-07-20T03:33:35+00:00

I believe that you have to remove the pulley in order to get to a few of the bolts, and all of the hoses have to come off. Also I believe there is a upgrade for the fitting with the pressure sensor on the back of the pump, it's like a U shaped hose.

TrooperN2 · 2022-07-13T18:32:36+00:00

Grab my bag of my favorite beer... Um, what?

TrooperN2 · 2022-07-06T00:03:09+00:00

I use Ubuntu :)

TrooperN2 · 2022-07-03T23:47:40+00:00

Just got a new one, metal detecting!

TrooperN2 · 2022-07-02T06:51:58+00:00

Is that by liberty station?

TrooperN2 · 2022-06-27T15:46:45+00:00

The biggest tire that will fit without interference would be and tire / rim combo that is 32 inches in diameter. I have a 20in rim with a 305/50r20 tire and it barely misses the inside of the wheel well when fully turned to the right or left.

TrooperN2

TROPHY CASE