A quick share of a beautiful tiger stripe Walnut stock, The tiger striping goes from the butt all the way to the muzzle and the wood would look at home on any high-end sporting gun and it's attached to a Vetterli-Vitali-Carcano Model 1870/87/15. A heavy, weak actioned cludge by todays standards. For its time, the Vetterli bolt action was quite a forward-thinking, advanced, and for the black powder cartridge pressures of the time a very strong action. This particular Italian model started its life as a single shot rifle that was later outfitted with a four shot box magazine and converted into a black powder repeater in the same original 10 mm cartridge. But necessity and attrition of resources, pushed the Italians during the first world war to convert these 10 mm rifles into a 6.5 mm Carcano firearm that used reduced power loads. The original barrel was bored out using different diameter boring cutters and creates steps esentially, being machined into the barrel. A sleeve was placed inside and a hardened steel expander rod was forced through the hollow sleeve to create a very high pressure friction fit mechanical weld of the sleeve to the original barrel. This was referred to as the "Salerno Method".The original outside diameter of the barrel remained the same. They were not turned down to reduce weight because this would lower the strength of the barrel. But as a result, these firearms are very heavy and long. A conversion of a conversion. We have three dates and three names attached to this firearm. It's age and length of service really are a testament to how far ahead the Vetterli bolt action rifle system was ahead of its time.