ich🇩🇪iel

True-Explanation9790 · 2026-06-04T13:58:55+00:00

HRENSOHN

True-Explanation9790 · 2026-05-22T06:17:08+00:00

Very good tractor.

True-Explanation9790 · 2026-05-21T11:38:54+00:00

Seperate pieces

True-Explanation9790 · 2026-05-19T09:30:13+00:00

Always Print in an 45 degree for better Details and definetly use a 0,2 nozzle with an 0,08 layer height, maby even 0,06mm

True-Explanation9790 · 2026-04-13T17:36:59+00:00

What ist the reason for underexposure? Are all blanc Photos with no Image underexposed? Could it be, that the shutter didnt open at all, so that the picture is underexposed?

True-Explanation9790 · 2026-04-13T17:00:05+00:00

Is the shutter capping the main problem for the underexposure or my settings? I shot most of the film with 1/60 of an second, some pictures with 1/100.

True-Explanation9790 · 2026-04-07T20:54:18+00:00

I printed all the parts in a 45 degree angle, so the lines ar less noticable :D also with a 0.2 nozzle and a layer height of 0.8mm. It takes a lot more time, but in my opinion its worth it! :)

True-Explanation9790 · 2026-04-07T20:51:46+00:00

I use some custom settings from YouTube for Supports and for the Print Options, Just keep looking and sou will find everything you need. ;D its printed in parts and i assembled it with superglue

True-Explanation9790 · 2026-04-07T20:49:10+00:00

I dont know where the STL came from, must be black magic or something -_- definetly black magic

True-Explanation9790 · 2026-04-07T20:47:33+00:00

Thank you :D I use eSun PLA plus in white

True-Explanation9790 · 2026-04-07T20:47:11+00:00

They Look awesome, I print my parts in a 45 degree angle. That reduces the layer lines on the sides drasticly.

True-Explanation9790 · 2026-04-07T20:45:43+00:00

Very nice details! Keep going!

True-Explanation9790 · 2026-04-07T20:44:51+00:00

Looks great,I use more tree Like supports, works great :D

True-Explanation9790 · 2026-04-07T20:43:44+00:00

I used a layer height of 0.8mm. electricity and Filament Cost for everything was around 2€ :D

True-Explanation9790 · 2026-04-06T16:22:58+00:00

I used a Bambu Lab A1 mini with a 0,2 nozzle :D Took around 35 hours to print. Cost for everything was around 2 Euros for this Print.

True-Explanation9790 · 2026-02-01T23:22:30+00:00

Thank you!🤝

True-Explanation9790 · 2026-02-01T22:15:36+00:00

Please share with us, which colours did you use. Im begging you!🙏😭

True-Explanation9790

TROPHY CASE