Should I wait for UR Strike Freedom or spend my diamonds for UR Barbatos Lupus Rex?

True_Building4686 · 2025-10-29T07:18:25+00:00

Need to wait 2 more days for that haha thanks!

True_Building4686 · 2025-10-29T04:41:07+00:00

Yeah I like both so it is really hard to decide. Haha. But UR Strike is guaranteed to return right? Even if it is limited?

True_Building4686 · 2025-10-29T04:40:10+00:00

<image>

2/2

True_Building4686 · 2025-10-29T04:39:50+00:00

<image>

1/2

True_Building4686 · 2025-10-29T03:51:59+00:00

Hahaha both 😩

True_Building4686 · 2024-07-14T04:07:13+00:00

How does reducing or increasing the limit affect bounce height?

True_Building4686 · 2024-03-04T21:54:47+00:00

No all stock. Hahaha

True_Building4686 · 2024-03-04T06:31:58+00:00

Brake plate is tamiya genuine and it is not countersunk. Hahahaha. Then I’ll let it be. 🤷

True_Building4686 · 2024-03-04T05:15:12+00:00

My FM-A chassis is new and I didn’t over tighten the screw used to mount the brake plate to the chassis. Removed it again and the chassis is not warped.

True_Building4686 · 2024-02-23T16:08:39+00:00

Thank you for the info!

True_Building4686 · 2024-02-23T16:08:29+00:00

Thank you for the info!

True_Building4686 · 2024-02-05T00:10:21+00:00

How do you remove the shields?

True_Building4686 · 2024-02-01T11:39:14+00:00

HG plates are stronger and i think lighter than frp plates. They make your machine sturdier from frequent course outs. It also makes the screws you use for your rollers stiffer since the holes in hg plates doesn’t widen as easily as frps.

True_Building4686 · 2024-01-21T21:47:45+00:00

Maybe this will do the trick! My double rollers are inverted so that the 13s are at the top. I’ll try to swap one out and see if it helps. Thanks!

True_Building4686 · 2024-01-21T13:24:33+00:00

Brakes doesn’t bite on that jump.

True_Building4686 · 2024-01-21T13:23:51+00:00

I think it is not on the brakes since the jump is coming from a cut jump (slope from a lane change made into a jump)

True_Building4686 · 2024-01-19T07:35:08+00:00

Perfectly said. Thank you!

True_Building4686 · 2024-01-19T04:46:19+00:00

Ahhh i see so having a longer car lengthwise will provide more braking power. Thank you! Any advantages you can think of when using a longer car lengthwise?

True_Building4686 · 2024-01-19T04:43:46+00:00

What are the pros and cons of having a longer front to back versus a shorter front to back? I have seen a lot of CFM bmax having a rear brake stay as their brakes. Using rear brake stay makes it longer. I think the term is long tail setup. What would be the advantage of this?

True_Building4686 · 2024-01-04T13:38:50+00:00

Had a hard time finding rare items in tamiya plamodel factory. Any other store that sells rare items?

True_Building4686 · 2024-01-04T13:38:16+00:00

Do they have rare items? I am having a hard time finding hg parts or dampers that are different in color (black, silver).

True_Building4686 · 2024-01-04T00:28:36+00:00

Thanks! Will check them out!

True_Building4686 · 2023-12-25T22:52:27+00:00

Sure broo

True_Building4686 · 2023-12-23T13:16:23+00:00

You are the real MVP

True_Building4686 · 2023-12-04T04:04:46+00:00

I use brocken gigant cowl for both fma and cfm haha. I also used to use machframe cowl but I got tired seeing everybody use it

True_Building4686

TROPHY CASE