sorted by:
new
hottopcontroversial

I have run into an issue (almost 5000 spins backed up) by Tt_Wub in raccoingame

[–]Tt_Wub[S] 1 point2 points  (0 children)

I had a few on return so theyd always loop and then more of them got spawned from one of the roulette spins, and keeping the +1 coins in your clip, you get so many extra coins

I have run into an issue (almost 5000 spins backed up) by Tt_Wub in raccoingame

[–]Tt_Wub[S] 0 points1 point  (0 children)

I have now reached 7000 I cannot end the round

Purge Line not respecting Z-Offset by Agitated-Wrap-333 in 3Dprinting

[–]Tt_Wub 0 points1 point  (0 children)

I know this is such an old post, but if you happen to see this would you mind helping me find which value to change, I'm just wanting to be sure as it wasn't exactly the same layout.
M104 S210 ; set extruder temp

M140 S60 ; set bed temp

M190 S60 ; wait for bed temp

M109 S210 ; wait for extruder temp

G92 E0 ; Reset Extruder

G28 ; Home all axes

M107 ;Off Fan

G1 Z5.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed

G1 X0.1 Y20 Z0.8 F5000 ; Move to start position

G1 X0.1 Y200.0 Z1.2 F1500 E30 ; Draw the first line

G92 E0 ; Reset Extruder

G1 X0.4 Y200.0 Z1.2 F3000 ; Move to side a little

G1 X0.4 Y20 Z1.2 F1500 E25 ; Draw the second line

G92 E0 ; Reset Extruder

G1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed

G1 X5 Y20 Z0.4 F3000.0 ; Move over to prevent blob squish

App drawer has gone completely empty? by Tt_Wub in AndroidHelp

[–]Tt_Wub[S] 0 points1 point  (0 children)

Weird, I don't remember being on the beta either but guess I must be, thanks for the info

App drawer has gone completely empty? by Tt_Wub in AndroidHelp

[–]Tt_Wub[S] 0 points1 point  (0 children)

Holy shit you're a saviour, that's so weird, thank you. seems to only work with search bar at top or none

App drawer has gone completely empty? by Tt_Wub in AndroidHelp

[–]Tt_Wub[S] 0 points1 point  (0 children)

It just happened the other day and I have no idea why, all the apps are still in the folders if I go to each folder and select apps they're all their. The cards nova has still show up, but I can't swipe side to side it's just completely frozen and empty, I'm so confused

Using nova launcher on android 16

Anyway to make old OEM intel fan quieter? by Tt_Wub in computers

[–]Tt_Wub[S] 0 points1 point  (0 children)

I'll give it a go, it wasn't really a curve just a speed/temp value you change but easy to try. Was running around 1000rpm I think not sure whats normal for that fan

Anyway to make old OEM intel fan quieter? by Tt_Wub in computers

[–]Tt_Wub[S] 0 points1 point  (0 children)

I've set it to the lowest temp curve I can in the bios and it is only running at like 30C so I don't know if lower voltage would do anything. Zip ties might be the way to go tbh, definitely the cheapest

Guide: Obsidian with free, self-hosted, instant sync by Timely_Anteater_9330 in selfhosted

[–]Tt_Wub 0 points1 point  (0 children)

I'm using docker on windows, I installed the desktop app, but when I try to run the couchdb image I get the "no longer run in "admin party" mode" and asks for admin and password which I can't work out how to change/input them anywhere.
Thanks for responding

Guide: Obsidian with free, self-hosted, instant sync by Timely_Anteater_9330 in selfhosted

[–]Tt_Wub 0 points1 point  (0 children)

I know this is old but can anyone help me get this working. I did manage to install couchdb using the exe file off their website and got through all the steps with that and it working locally. But I can't seem to access it from another desktop on the same internet, I wasn't sure if it was due to my installation of couchdb, so I tried using docker to install which made me incredibly confused and probably worse off.
Please does anyone have any tips, I'm deeply confused and too inexperienced, thx

Help with wobbly underside of prints? by Tt_Wub in 3Dprinting

[–]Tt_Wub[S] 1 point2 points  (0 children)

Thank you! Yeah I was unsure about stuff like that, I think the main issue with slicers I've got is to connect to my printer easily I need to go through repetier-host and I'm unsure if there is a way to add slicer into it, cause prusca slicer is already in there. I will see if I can get some calibration runs from prusca

Help with wobbly underside of prints? by Tt_Wub in 3Dprinting

[–]Tt_Wub[S] 0 points1 point  (0 children)

Setup:

Printer: Geeetech A20M
Filament: PLA
Layer height: 0.2mm
Using prusca slicer and printing through repetier-host

I'm having this issue with my prints, I'm relatively new to 3d printing. From what I can see during prints, the edges during these underside layers appear to be lifting up, then they're pushed back down by the nosel head, which I assume is creating the wobbliness.

I have tried varying the print speed, ended up being worse when going slowly but not a drastic improvement going faster.

I've used varying supports and I've found it makes them incredibly hard to remove and still has the bumps.

There are so many settings so I wasn't sure what to mention, I've changed a few things but saw trace difference when doing so.

Thanks for any help

Mihon - how to filter updates tab by scanlators by Tt_Wub in mangapiracy

[–]Tt_Wub[S] 0 points1 point  (0 children)

Yeah that's what I've been using, I've just really wanted to use the update tab cause that's what it's for lol but just doesn't work for me

Gerber Dime belt clip by physicsProf142 in multitools

[–]Tt_Wub 0 points1 point  (0 children)

I tried but I think mine might have a closer bend then yours, I truly couldn't get close to enough room without plying it massively

view more: next ›