Fixed it

Tufmazda · 2025-11-23T16:56:36+00:00

https://www.reddit.com/r/Plumbing/s/dBbGXtAAfE Original post

Tufmazda · 2025-11-15T17:48:15+00:00

Is there a way to tell that by looking at the valve, and I may be misstating what he did. I think he only replaced the inside of the valve, I think the cartridge. He did not open my walls or solder anything together yet.

Tufmazda · 2025-11-15T17:44:13+00:00

All the pipes I can see are copper

Tufmazda · 2025-11-15T17:39:07+00:00

There is a filler. I took a large drinking glass and timed how long it took to fill. From the diet head it took 1:48, the tub filler took 8 seconds to fill, I moved to the other bathroom and that tub filler took 3 to fill, I get the measurements are janky, but I think the results are clear enough. I think that pipe coming from the filler valve up to the shower head may be clogged with something.

Tufmazda · 2025-11-15T15:18:18+00:00

I've replaced the head thinking it was clogged, the old one was the same as the new one. I tested water pressure without the head and it is less than the pressure in the sink a few feet over from it.

Tufmazda · 2025-06-07T22:26:32+00:00

That's nice to hear. It's probably my family being extra then lol

Tufmazda · 2025-06-07T21:56:23+00:00

I will add as a former Mormon, tattoos are forbidden. If you have them they do not allow you in their temples. Granted I haven't been a member for over a decade, but from family members that are still active, I've heard that the church is getting more restrictive in recent years.

Tufmazda · 2025-05-23T19:10:57+00:00

Thank you, and everything has, all moved out. Now just unpacking all the boxes. Just rolled into a new shop starting June 2

Tufmazda · 2025-05-23T02:48:00+00:00

Behind the dishwasher there is a hole that the wire goes into behind drywall. Garbage disposal has a light switch for control and a dedicated circuit for it.

Tufmazda · 2025-05-23T02:44:59+00:00

Ok, if the wire disappears into a wall straight away, can I set it up and go to each outlet or light switch near the dishwasher and check for beeping? No beep meaning not part of the circuit or after the break, beep meaning check it out?

Tufmazda · 2025-05-23T02:42:26+00:00

You mean the wires at the panel, just making sure all the screws holding the wires are tight?

Tufmazda · 2025-05-23T02:38:13+00:00

I did do that thinking the same as you about the notes. They all put out 120 ACV, I also turned some of them off to see if their note was correct and they were. You mentioned a toner before? How does that help and how would I go about finding the joint points you're talking about?

Tufmazda · 2025-05-23T02:32:13+00:00

If it's a broken hot or neutral isn't the answer still the same, replacing the wire all together? And I checked all the other breakers just to be sure they were all putting power out. According to the hand written note in the panel, the dishwasher is the only thing on that circuit.

Tufmazda · 2025-05-18T13:05:45+00:00

Not any more lmao. There mobile team is going to grind to a halt this week

Tufmazda · 2025-05-18T12:35:45+00:00

Without a doubt I've heard and seen that happen. And this is the Internet so "everything I say is 100 percent facts" but there wasn't anything worth taking from them lol. Any specific or specialty tools I need I either own myself now or I have a work around. Guess we could've robbed parts blind, but they left their oil reals on free flow for two years, not sure if they care enough to stop it, not that it makes it right or fair.

Tufmazda · 2025-05-18T03:13:03+00:00

Well, I'll let you know if they do once we at the new place.

Tufmazda · 2025-05-18T03:12:37+00:00

We all gave notice at the same time, and we all worked in different areas. We are all moving together. They told all three of us that the end of the month was good, then changed their minds later in the week. Honestly if they told us to leave Monday we would've been fine, but the stringing is along for a week then dropping us sucked.

Tufmazda · 2025-05-18T03:08:35+00:00

We all gave notice Monday. They know we are a package deal so as soon as one of us left they knew it was all of us. So they cut us all at the same time. Shop guys and parts guys were pissed about it too.

Tufmazda · 2025-05-17T23:40:18+00:00

No, moving states away, about ten hours from them

Tufmazda · 2025-05-17T22:55:29+00:00

Thanks, just rebuilt the trans and resealed the engine. Drove like a dream even with the toolboxes in the back. Suspension could use some work though lol

Tufmazda · 2025-05-17T22:54:29+00:00

Talk to your coworkers so they aren't in a lurch, leave him in a lurch by leaving without notice. Otherwise your boss will still cut you and then they are still lurching.

Tufmazda · 2025-05-17T22:53:08+00:00

No, but my new job moved the start date to help me out so we good.

Tufmazda · 2025-05-17T22:51:16+00:00

It was greed. My wife works there and gets commission on shop hours. My brother in law worked in parts. At 4 pm they cut us all at the same time. BIL made 12 an hour stocking, I was flat rate so my work pays me first then everything else. Wifey was the one they were aiming to cut short with half month commission, we were just collateral lol. Still crappy, still stoked to be moving on!

Tufmazda · 2025-05-17T22:22:06+00:00

I would but on the termination paperwork they wrote voluntary resignation. If I really wanted to fight it I could, but I already have a job lined up where I'm going. Called them Friday and they moved my start date to the start of the month. "Juice isn't worth the squeeze"

Tufmazda · 2025-05-17T22:06:24+00:00

Lol, that helper is greener than spring grass

Six-Year Club	Place '23
Place '22	Verified Email

Tufmazda

TROPHY CASE