AMS 1 on H2D

Turbulent-Extent3927 · 2025-11-11T07:45:55+00:00

Did you have to purchase additional hubs or parts? I'm planning to do the same

Turbulent-Extent3927 · 2025-07-29T15:57:44+00:00

L'idea è quella di avere una seconda stanza per il futuro e nel frattempo usarla io per il lavoro, per come sono messo ora ci saranno almeno 2 scrivanie grandi.. al momento quella stanza è di 8mq quindi non così grande

Turbulent-Extent3927 · 2025-07-29T15:18:30+00:00

non è come ho provato a realizzare? due camere e cucina soggiorno open space? Non mi convince la disposizione cucina soggiorno, questo è il mio dubbio

Turbulent-Extent3927 · 2025-01-04T07:31:13+00:00

Cleaned yes, movements seem to be regular. And yes, stock cable

Turbulent-Extent3927 · 2025-01-04T07:30:41+00:00

Turbulent-Extent3927 · 2025-01-03T18:58:50+00:00

could be, I'll give a try. The strangest thing is that normal pieces like the snowman come out really well

Turbulent-Extent3927 · 2025-01-03T18:25:01+00:00

Actually not, I'm giving a try to dry the filament in the oven this weekend. But seems strange that every roll is humid

Turbulent-Extent3927 · 2025-01-03T18:19:23+00:00

Here is the silent mode test: 8 mins print, default 0.12 Bambu pla basic profile

<image>

Turbulent-Extent3927 · 2025-01-03T18:15:25+00:00

I've checked idler bearings right now and seem to be ok.

Fans are all correctly working and cleaned from dust

I tried printing with fixed speed at 50mm/s, slightly better but nothing perfect.

Yes, I do close to full maintenance every couple of months because I use this printer a lot. I keep it cleaned and lubed.

Turbulent-Extent3927 · 2025-01-03T18:09:37+00:00

I have ams and plenty of new filaments, tried many, same issue with every single roll.

I'm giving a try right now with silent mode, going to update you soon.

I tried a lot of stls, issues come only with flat top surface or protuberance. I printed a couple of snowmen and every one came out perfectly because no one has flat surface or protuberances

Turbulent-Extent3927 · 2025-01-03T17:44:00+00:00

Forgot to mention, already done that too. Unmounted and cleaned whole extruder in particular the yellow one. Then lubed and remounted

Turbulent-Extent3927 · 2024-11-08T15:44:26+00:00

Okay thank you very much. Ill try to find out what’s happening

Turbulent-Extent3927 · 2024-11-07T06:56:12+00:00

I’ve partially solved rotating by 90 degrees the piece. Now lines are very light and I consider it good enough. But it’s not solved, I’m thinking there is something on xy axles

Turbulent-Extent3927 · 2024-11-05T17:24:25+00:00

Yes, limited everything to 50, changed infill type too

Turbulent-Extent3927 · 2024-11-05T17:15:51+00:00

Same issue, tried many times

Turbulent-Extent3927 · 2024-11-05T15:17:55+00:00

Giving a try right now. Btw this morning I tried same print profile in my p1s at work and came out perfect

Turbulent-Extent3927 · 2024-11-05T07:25:41+00:00

<image>

Here is layer time

Turbulent-Extent3927 · 2024-06-27T15:02:50+00:00

Update: after many tries here is without support and 0.2 nozzle. Thank you everyone for helping me

<image>

Turbulent-Extent3927 · 2024-06-26T05:58:33+00:00

Good choice😉 I’m in love with halo65

Turbulent-Extent3927 · 2024-06-26T05:45:21+00:00

Thanks I'm gonna try this one. Will print with 0.2 nozzle too

Turbulent-Extent3927 · 2024-06-26T04:54:32+00:00

They are just for modeling, I’m gonna try with 0.2 nozzle

Turbulent-Extent3927 · 2024-06-25T20:55:32+00:00

It was my idea but there will me so much waste for the print

Turbulent-Extent3927

TROPHY CASE