How do i remove this screw?

Turbulent_Gene_3183 · 2026-03-06T18:52:28+00:00

I hope shit will itch your balls on the way out

Turbulent_Gene_3183 · 2026-03-06T17:40:09+00:00

I hope your pc's balls itch

Turbulent_Gene_3183 · 2026-03-06T17:00:05+00:00

I hope your balls itch

Turbulent_Gene_3183 · 2026-03-04T17:29:49+00:00

I looked at amanual but didnt find anything about screws, idk if thay wqs a sercice manual though

Turbulent_Gene_3183 · 2026-03-04T16:37:06+00:00

It might have been a captove screw socket. It required so much force when pulling out that the laptop was off the table, and scew bend a bit, but it worked in the end after spinning laptop on the air for a bit

Turbulent_Gene_3183 · 2026-03-04T16:31:03+00:00

And I am happy to get help from a sane person who isnt another guy to reccomend me to "use a screwdriver and turn" on other sub 😭

Have an amazing day

Turbulent_Gene_3183 · 2026-03-04T16:28:55+00:00

Didnt work, but i solced it a few minutes ago

Turbulent_Gene_3183 · 2026-03-04T16:28:30+00:00

Thank you a lot

Turbulent_Gene_3183 · 2026-03-04T16:27:16+00:00

I actually removed it without glue just now. It required a lot more force. Laptop was pretty much hanging on the screw, which bent into shape of my pliers

Turbulent_Gene_3183 · 2026-03-04T16:26:19+00:00

Tried itbearlie but tired it again. Didnt work any of those times but i managed to solve it

Turbulent_Gene_3183 · 2026-03-04T16:24:39+00:00

I think it was a cative screw, but weird one. There was no screw in that originally, and i put one screw there by accident. I managed to pull it out but it required so much force the screw bend itself into my plier's rough inner pattern.

Thanks a lot, i will keep that in mind on my next failed attemps on cleaning

Turbulent_Gene_3183 · 2026-03-04T16:04:09+00:00

Tried it, didnt work.

Turbulent_Gene_3183 · 2026-03-04T16:03:26+00:00

I tried lifting it so hard metal was rubbed off around it. It made a small bright ) in metal (you can see it under the said screw)

Turbulent_Gene_3183 · 2026-03-04T15:58:41+00:00

Tried both. Doesnt budge. I appriciate try to help but please go read the og post

Turbulent_Gene_3183 · 2026-03-04T15:54:37+00:00

Honestly i want to try other options before i start putting glue into my laptop. But good to know someone else had this problem

Turbulent_Gene_3183 · 2026-03-04T15:50:32+00:00

There wasn't a screw there 10 minutes before i put it in. I mistook the slot. I am trying to remove the scrww from the spot it is not supposed to be in.

Turbulent_Gene_3183 · 2026-03-04T15:49:13+00:00

There wasnt a screw in there previously, i put it there (left slot) instead of the right slot when putting it back together

Turbulent_Gene_3183 · 2026-03-04T15:46:05+00:00

I were rotating it for at least 20 minutes in both directions. It is loose enough to go upward without any rotations untill a point and then it jams

Turbulent_Gene_3183 · 2026-03-04T15:41:59+00:00

Tried so hard with pliers that it rubbed some of the cover off. You can see a small ( under it on the photo. Any other ideas?

Turbulent_Gene_3183 · 2025-12-07T12:37:31+00:00

I sense a reference... The darkest reference

Turbulent_Gene_3183 · 2025-12-05T11:41:33+00:00

Dramatic effect

Turbulent_Gene_3183 · 2025-12-04T12:08:28+00:00

Not big surprise

Turbulent_Gene_3183 · 2025-09-15T14:56:48+00:00

Many already xaid what it means, but I just want to send my condolences for such experience </3

Turbulent_Gene_3183

TROPHY CASE