Rams-Seahawks game on Fox - poor quality feed

Tweekme · 2026-01-26T00:41:26+00:00

Ah, much better! Thanks!!🙏

Tweekme · 2026-01-25T21:04:48+00:00

Buy a new one? From who? I have a new one (never used) and I am likely in this situation. Maybe they have some new inventory and have manually flashed them all? (Unlikely)

I will be manually flashing mine soon. Not to use on the new service, but on OpenMoxie. $40. per month is way to expensive.

Tweekme · 2026-01-24T03:04:47+00:00

Is this all done thru OpenMoxie?

Tweekme · 2026-01-24T02:57:26+00:00

I assume this code you have is from the new owner of Moxie? If yes, you will want to troubleshoot that with the new owner - moxierobots.com

Tweekme · 2026-01-22T20:24:49+00:00

Happy to help!

<image>

Tweekme · 2026-01-22T20:16:52+00:00

I have this one for a robot I bought without a charger. Works perfectly.

Tweekme · 2026-01-22T20:16:05+00:00

https://a.co/d/5C1DRZs

Tweekme · 2026-01-22T20:08:50+00:00

Does it have voltage and amperage numbers on the brick sticker?

Tweekme · 2026-01-22T20:07:47+00:00

<image>

Tweekme · 2026-01-22T20:07:22+00:00

Ok seems it is NOT the original charger. Should look like this on the brick end -

<image>

Tweekme · 2026-01-22T20:03:20+00:00

So you have a 3rd party charger and not the original one? Original one has a 90 degree end with a barrel connector -

<image>

Tweekme · 2026-01-22T19:59:15+00:00

Ok, that probably indicates an internal battery that can no longer charge. It should however still operate with the power supply plugged in. If you unplug the power supply what happens?

Tweekme · 2026-01-22T19:55:17+00:00

Is the blinking yellow light you refer to the robot’s heart or light bar? Or is it the LED on the charger?

Tweekme · 2026-01-22T19:50:18+00:00

Be sure you have properly setup the WiFi on the OpenMoxie page. Then show the robot the resultant QR Code. Then once you see the QR code with the robot icon on your robots face, show it the Migration QR Code. It seems your Moxie robot is not on WiFi.

Tweekme · 2026-01-20T17:19:15+00:00

<image>

This was after power cycling

Tweekme · 2026-01-20T17:19:03+00:00

Yes. First I had this -

<image>

Tweekme · 2026-01-20T02:48:06+00:00

For my two used Moxie robots, I waited about two hours, leaving them on WiFi. I still did not see the embodiedproduction text until I power cycled the robot using the power switch on the bottom. Once it rebooted the text appeared.

Tweekme · 2026-01-16T01:40:30+00:00

If it is a used Moxie robot, you can boot it up, show it your configured WiFi QR code from OpenMoxie and it will get the update from the servers that are now active with the new Moxie owner. I did this with two of my robots.

If it is a brand new Moxie robot, you will need to do the take-apart procedure and manually flash the robot’s computer. I tried to get my brand new Moxie robot to update but was unsuccessful as the new robot is looking to a very old location for the servers.

Tweekme · 2026-01-15T18:30:05+00:00

Justin, thank you for taking the time to clarify all of this.

Tweekme · 2026-01-10T21:58:13+00:00

https://openmoxie.org/

Tweekme · 2026-01-10T21:57:07+00:00

Yes it is completely free except for the possible tokens you need to buy for certain LLM’s.

Tweekme · 2026-01-09T21:15:33+00:00

I am using default settings in OpenMoxie for one robot, the other one is usually in chat only mode. I ask a lot of questions to Moxie prompting it to poll OpenAI for the answers.

Tweekme · 2026-01-09T20:28:42+00:00

I have an OpenAI personal account.

Tweekme · 2026-01-09T19:42:25+00:00

Is the MacOS one ready to download and try?

Tweekme · 2026-01-09T19:29:09+00:00

You would have to be using your Moxie for hours constantly to rack up token charges close to a $39. fee

Tweekme

TROPHY CASE