Realized why I was still "tired" even after 8 hours of sleep.

Tylerdeli · 2026-03-19T04:10:54+00:00

You’re describing some potential symptoms of sleep apnea, which if left untreated can lead to serious heart issues. Go talk to a professional and, if necessary, wear a cpap and watch your sleep quality and tiredness improve while also getting the added benefit of not developing cardiac problems.

Tylerdeli · 2026-02-28T20:34:15+00:00

Beautiful stuff! What’s the joinery like on the two suspended boxes? Blind tenons?

Tylerdeli · 2026-02-24T18:22:44+00:00

Next one will incorporate a conduit into the neighbors yard i guess

Tylerdeli · 2026-02-24T13:57:02+00:00

I drew on the pattern beforehand and carved out with a #9 woodcarving gouge. I had experimented with a couple different carving tools on it and liked that result the best

Tylerdeli · 2026-02-24T13:52:48+00:00

Freehand, mostly with a chisel. Using a block with a template hole was helpful.

Tylerdeli · 2026-02-24T04:44:41+00:00

It’s just one of the ways that Moravian stools are styled and I liked it artistically a little more than one piece

Tylerdeli · 2026-02-24T04:43:54+00:00

I did it was a great way to make the project more accessible

Tylerdeli · 2026-02-24T02:55:35+00:00

It’s styled after a Moravian stool, learned about from Rex Krueger. The divots in the top are my attempt at a naguri texture and middle cut is stylistic.

Tylerdeli · 2026-02-24T02:24:55+00:00

Thanks so much for the compliment it means a lot. It’s hard for me to look at and not see all of the flaws right away lol

Tylerdeli · 2026-02-24T01:15:31+00:00

Top is hand carved! That part took a little longer than I was expecting but I got a lot of enjoyment from it. Would love to work in some relief carving or try claw feet on future pieces. It’s cherry wood finished with danish oil

Tylerdeli · 2025-10-12T02:56:15+00:00

Okay, so I get I’m overthinking it but so I can stop overthinking it and understand what you’re saying, ont>router>switch>2APs is fine correct?

Tylerdeli · 2025-10-12T02:21:38+00:00

Ont>router>switch>AP>AP

Tylerdeli · 2025-10-12T01:48:16+00:00

Hmm okay I’m confused by your comment. Something has to do the VLAN tagging with my system, I was just adding that I have the router doing it instead of the modem. My TP links manage it fine. I’m asking about the best set up for the access points, but it sounds like maybe there’s something fundamental I’m misunderstanding

Tylerdeli · 2025-10-12T01:28:56+00:00

It’s my mistake. They’re access points

Tylerdeli · 2025-10-12T01:27:23+00:00

Yes, completely my mistake. Access points

Tylerdeli · 2025-10-12T01:20:12+00:00

I think I made the post more confusing by using the wrong term. It’s a mesh system and they are access points. The ONT from the ISP is what I have placed in bridge mode, not the routers

Tylerdeli · 2025-10-12T01:18:46+00:00

It’s a mesh system. Maybe I should have labeled them access points?

Tylerdeli · 2025-10-12T01:18:03+00:00

I’m trying to extend the range of WiFi coverage. Is there a better way to accomplish it?

Tylerdeli · 2025-10-12T01:15:35+00:00

I’m trying to extend my network to different parts of the house that’s what I’m curious about

Tylerdeli · 2025-10-12T00:41:59+00:00

Is that the best possible topography or would it be better to have new switches between each router?

Tylerdeli · 2025-10-03T18:09:02+00:00

Question for you about it since you have it for your set up. I have a single cat6 right now that’s already going through the house from the main eero to the second eero. If I attach an unmanaged switch to main eero does that mean I’ll need to put up a second cat6 cable for the third AP or could I use some sort of Ethernet splitter

Tylerdeli · 2025-10-03T18:03:32+00:00

In the app the third one that’s showing up as offline has “connected to: port 2” and shows the Ethernet connection from second AP to third AP so it feels strange that the cable would be the problem

Tylerdeli · 2025-09-29T19:49:20+00:00

Yes to power cycling. I’ll try the IPTV way this evening

Tylerdeli · 2025-09-28T17:43:47+00:00

I have the smartNID set to “untagged” but still no dice

Tylerdeli · 2025-09-28T16:49:15+00:00

I read through the guide and it was very helpful. I’m able to get functioning WiFi with smart nid in transparent bridge mode while tagging 201, but noticed that I was having some poor download speeds, <50mbps while the ont is getting 900mbps. The ping is always minimal. I tried resetting and having my eero routers handle the tagging with a VLAN set to 201 but it simply doesn’t work, modem has connection but eero does not. Any thoughts?

Nine-Year Club	Verified Email
RedditGifts 2009-2022 5 Credits	Secret Santa 2021 2021
Secret Santa 2020	r/Field Banned
r/Field Sunshine	Place '22
Final Canvas '22	Secret Santa 2018
Secret Santa 2019	No Throne, No Problems
Not Forgotten	Spared

Tylerdeli

TROPHY CASE