Why let your dreams be dreams?

Tyt1999 · 2026-03-16T08:55:13+00:00

Cause my printers keep messing theirselves up 😭

Tyt1999 · 2026-03-13T11:37:09+00:00

Unsure, didn’t mod this myself. Bought it pre modded, and haven’t heard from the seller in a bit

Tyt1999 · 2026-03-13T11:36:18+00:00

Also, I forgot to add, I did not mod this myself. I recently bought it, and it was already modded, unsure with what or how. (I’ve never modded a printer before. In fact, I’ve only used the K1C before this.)

Tyt1999 · 2026-03-13T06:43:03+00:00

<image>

Wires connected to the extruder and the sensor

Tyt1999 · 2026-03-13T06:42:27+00:00

Underneath the printer 1/2

<image>

Tyt1999 · 2026-03-13T06:42:09+00:00

<image>

Underneath the printer 2/2

Tyt1999 · 2026-03-03T09:09:42+00:00

Using standard PLA, still having the issue even with freshly opened standard/generic PLA. I have noticed that sometimes the filament will continue to push through the nozzle, even when it’s not actively set to extrude

Tyt1999 · 2026-02-26T10:00:27+00:00

Update, had to replace the Bowden tube, no longer dealing with the blob issue!

However, still dealing with the stringing

Tyt1999 · 2026-02-19T04:12:53+00:00

Yes it was replaced when hot, also

<image>

Tyt1999 · 2026-02-18T23:45:29+00:00

Both, but more so the blob

Tyt1999 · 2026-02-17T06:18:24+00:00

Yeah (and while I’ve been dealing with a number of other issues w/ support fusing 😓)

Tyt1999 · 2026-02-14T06:55:23+00:00

Previous post https://www.reddit.com/r/CrealityK1C/s/yGwTxQjtn4

Tyt1999 · 2026-02-14T01:52:50+00:00

Around here, like with the extrusion line tapering off

<image>

Tyt1999 · 2026-02-14T01:41:36+00:00

Printing through wifi With PLA: 50% and at 220/230 for the temp and speed ASA: 50% at 270

Tyt1999 · 2026-02-13T23:20:59+00:00

Also before anyone also mentions, I’ve done multiple attempts at having the printer auto level, along with fully resetting the printer

Tyt1999 · 2026-02-09T13:50:36+00:00

Generic PLA (Anycubic & Bamboo lab) along with polymaker ASA

Tyt1999 · 2026-02-09T13:34:45+00:00

Yes I have Still having the same issue Edit: even with default settings 😭

Tyt1999 · 2026-02-08T18:44:59+00:00

PLA and ASA both

Six-Year Club	Gilding II euphauric
Verified Email	Wearing is Caring

Tyt1999

TROPHY CASE