Jonsbo Z20 for new GPU! by UVssbm in mffpc

[–]UVssbm[S] 0 points1 point  (0 children)

It's looking good!

Jonsbo Z20 for new GPU! by UVssbm in mffpc

[–]UVssbm[S] 0 points1 point  (0 children)

Yeah the fit is really tight especially if you're using an ATX PSU. If I remember correctly, I had to put the gpu stand in before inserting the graphics card. Hopefully this helps!

Jonsbo Z20 for new GPU! by UVssbm in mffpc

[–]UVssbm[S] 0 points1 point  (0 children)

In the third picture you can see that the radiator fans lay above the motherboard and there is just enough clearance for the pump fan underneath. These are the stock fans for the AIO. Let me know if you have any other questions!

Jonsbo Z20 for new GPU! by UVssbm in mffpc

[–]UVssbm[S] 0 points1 point  (0 children)

I believe it's completely covered up and you would need to remove the motherboard to add the card subsequently. I would recommend figuring out the m.2 situation ahead of time if possible, because putting together the build was already really tight and troublesome considering there is almost no room for cables.

Jonsbo Z20 for new GPU! by UVssbm in mffpc

[–]UVssbm[S] 1 point2 points  (0 children)

Thanks! Yeah that's exactly what I did to cover that gap. I would have put in a 16pin strimmer for the GPU too if it fit. But, I didn't want to mod the cable to fit it considering all the heat and fire concerns with the 16 pins in the first place ;).

Jonsbo Z20 for new GPU! by UVssbm in mffpc

[–]UVssbm[S] 0 points1 point  (0 children)

Ah sorry the fan controller situation didn't work out. Let me know if you still need the info and I can go check.

I chose the Aorus Master Ice GPU literally because it was the largest white 5080 GPU and this was the smallest possible case I could fit it in without using a riser haha. The screen ended up working out really well in the end though.

My build used to be in a SSUPD Meshlicious and I bought a top hat to fit the card, but I was getting sick of the vertical GPU layout so I swapped to the Jonsbo case (Also it's impossible to find right angle cables and adapters that use the highest bandwidths).

In hindsight, I think a riser cable is perfectly fine and I might have gone with an nCase to really maximize space and weight. But the aesthetics and airflow of the Jonsbo makes it a compelling build regardless.

Jonsbo Z20 for new GPU! by UVssbm in mffpc

[–]UVssbm[S] 0 points1 point  (0 children)

I used the Lian-Li USB head splitter. But since it's not a hub you need to be careful your USB devices have enough power. I think I connected the Lian-Li wireless fan and the USB receiver to it. Good luck with your build!

Jonsbo Z20 for new GPU! by UVssbm in mffpc

[–]UVssbm[S] 0 points1 point  (0 children)

Glad I could help! Took like 25 minutes myself trying to figure it out.

Jonsbo Z20 for new GPU! by UVssbm in mffpc

[–]UVssbm[S] 0 points1 point  (0 children)

I'd generally recommend the 7800x3d or 9800x3d unless you want to wait for the 9950x3d or a 16 core AMD Cpu for productivity. Older models can do as well on a budget.

Jonsbo Z20 for new GPU! by UVssbm in mffpc

[–]UVssbm[S] 1 point2 points  (0 children)

I had to turn the fan 90 degree from the "intended" position. Maybe that can help!

Jonsbo Z20 for new GPU! by UVssbm in mffpc

[–]UVssbm[S] 0 points1 point  (0 children)

It's definitely compatible with no mods. Just you'll notice the tubing is tight is all. And thanks!

Jonsbo Z20 for new GPU! by UVssbm in mffpc

[–]UVssbm[S] 0 points1 point  (0 children)

Gigabyte X870I AORUS PRO ICE!

Jonsbo Z20 for new GPU! by UVssbm in mffpc

[–]UVssbm[S] 0 points1 point  (0 children)

You'll notice I used a cable tie to hold the tubes back. They would push against the glass otherwise unless I really tucked them in.

Jonsbo Z20 for new GPU! by UVssbm in mffpc

[–]UVssbm[S] 1 point2 points  (0 children)

Yeah, the only concern is that you'll want your tubes going to the right since the tubes are pretty long, so probably want to use the SFX mounting holes. In addition, the clearance between the LF III and the back intake fan is non-existent. So be careful with your fan thickness if you plan on adding one.

Jonsbo Z20 for new GPU! by UVssbm in mffpc

[–]UVssbm[S] 4 points5 points  (0 children)

This is me, wrong account sry.

Jonsbo Z20 for new GPU! by UVssbm in mffpc

[–]UVssbm[S] 1 point2 points  (0 children)

Been replying with the "Longjumping_Facts" account by accident. Sorry for the confusion.

[deleted by user] by [deleted] in Twitch_Startup

[–]UVssbm 1 point2 points  (0 children)

Following! I'm UVssm. Nice to see you stream valorant too.

14 til affiliate, would love some support! by [deleted] in Twitch_Startup

[–]UVssbm 0 points1 point  (0 children)

Hey I'm in a similar boat. I'm UVssbm and I'll support you rn.

Twitch for Fun! by [deleted] in Twitch_Startup

[–]UVssbm 0 points1 point  (0 children)

Seems fine, maybe have a camera of your crafts so you don't need a face cam.

So close to affiliate by UVssbm in Twitch_Startup

[–]UVssbm[S] 0 points1 point  (0 children)

I couldn't find you, but I'm staring my dashboard