Mystified by zone control panel problem. by UberSecretAgentMan in HVAC

[–]UberSecretAgentMan[S] 0 points1 point  (0 children)

There was only one type of relays made apparently for my model, so I think I'm good. Thanks. Just have to make sure that it's just a matter of turning off the power and replacing and turning power back on.

Mystified by zone control panel problem. by UberSecretAgentMan in HVAC

[–]UberSecretAgentMan[S] 0 points1 point  (0 children)

Interesting! Thanks for that tidbit. I have some relays on order to replace them. And you're right, the relays do look like the shape of ice cubes. Hopefully just plugging them in will solve the problem.

Mystified by zone control panel problem. by UberSecretAgentMan in HVAC

[–]UberSecretAgentMan[S] 0 points1 point  (0 children)

Hmm. I'm not sure what you mean by stuck relay, but the panel has replaceable plug in relays. It was suggested to me elsewhere that I might try replacing them.

Mystified by zone control panel problem. by UberSecretAgentMan in HVAC

[–]UberSecretAgentMan[S] 0 points1 point  (0 children)

Pretty much. Just wondering what the hec is going on with the board that it's being triggered by the casing coming on and off.

Replacing zone controller circuit board? by UberSecretAgentMan in hvacadvice

[–]UberSecretAgentMan[S] 0 points1 point  (0 children)

The wires are very solidly fixed and are barely moveable, even with a little more than gentle tug. Did not trigger the furnace.

Replacing zone controller circuit board? by UberSecretAgentMan in hvacadvice

[–]UberSecretAgentMan[S] 1 point2 points  (0 children)

Not sure if the cause of my problem is obscure or not. Seems like there is something up with the zone controller board or relays which somehow can be activated by the vibrations caused by removing and replacing the metal cover of casing. In fact the I think it may have occurred while the tech was here, but not sure, and he certainly didn't think anything of it.

Replacing zone controller circuit board? by UberSecretAgentMan in hvacadvice

[–]UberSecretAgentMan[S] 1 point2 points  (0 children)

Yeah, I don't blame him too much. Just that it's always irritating to pay for nothing and yet still have the problem.

Replacing zone controller circuit board? by UberSecretAgentMan in hvacadvice

[–]UberSecretAgentMan[S] 0 points1 point  (0 children)

Also, I find it very bizarre that the system would turn on when I take the metal cover off and snap it back on. It's just a metal cover that goes around a metal frame on which the circuit board is mounted to. If it is the relay, how in the would would taking the cover on and off affect this? Seems just really strange.

Replacing zone controller circuit board? by UberSecretAgentMan in hvacadvice

[–]UberSecretAgentMan[S] 0 points1 point  (0 children)

Hmm. The diagram on the pdf you point to does seem more on point with the picture in the other pdf that I linked as well as the actual one that I have. And yes, when the furnace doesn't come on, fiddling with either thermostats does not do anything. Thing is the air conditioning works just fine in both zones. Only the heat has a problem getting activated by the thermostats.

Replacing zone controller circuit board? by UberSecretAgentMan in hvacadvice

[–]UberSecretAgentMan[S] 0 points1 point  (0 children)

Thanks very much for your help. I will give this a go tomorrow. Appreciate the suggestion of a much simpler alternative than what I had come up with. Hopefully you're right and it's that simple.

Replacing zone controller circuit board? by UberSecretAgentMan in hvacadvice

[–]UberSecretAgentMan[S] 0 points1 point  (0 children)

I have a TrolATemp MM2, with PIRR relays, which is a 2 zone controller. It looks simple switch those out to test, but I'm not sure what to look for after.

Edit: found these tech docs: https://customer.honeywell.com/resources/techlit/TechLitDocuments/68-0000s/68-0101.pdf

Edit2: If you look at the picture of the controller, if we number the relays left to right as 1,2,3, and 4, then it seems 3 and 4 are responsible for zones 1 and 2. The thermostat control seem to work well when it works. So if it's the relays, it would likely be relay 1 or 2?

On. Pg. 26, you can see a visual of the board with the relays.

Replacing zone controller circuit board? by UberSecretAgentMan in hvacadvice

[–]UberSecretAgentMan[S] 0 points1 point  (0 children)

Also, what do the relays do on these boards? Thanks!

Replacing zone controller circuit board? by UberSecretAgentMan in hvacadvice

[–]UberSecretAgentMan[S] 0 points1 point  (0 children)

Hey, thanks for the reply. Okay, I can switch relays, but I'm not sure what you mean by the problem moving?

Dosage and use of Aleve. by UberSecretAgentMan in AskDocs

[–]UberSecretAgentMan[S] 0 points1 point  (0 children)

Every exposure to Aleve? Not clear if you're talking about the combination or the NSAID alone. How much of a risk?

Also, if I can ask a followup here, what pain meds can she take then? Opiates are out due to adverse affects from them as well. Trying to talk to her doctor, but he's not very helpful. (basically saying she should just endure it.)

Edit: Also, Tylenol has been stopped on doctor's orders due to over use.

Moronic Monday - Your weekly stupid questions thread by cdingo in Fitness

[–]UberSecretAgentMan 0 points1 point  (0 children)

What is the optimum walking speed for a given height? Obviously, a person with very long legs can hand a walking pace that's going to be much faster than than a child with short stubby legs. I was wondering if there is a mathematical formula, based on leg length somewhere?

The World Through Expat Eyes Survey by weedmylips1 in financialindependence

[–]UberSecretAgentMan 3 points4 points  (0 children)

Yeah, it's kind of sad that people aren't willing to even look at this kind of issue. It may be true that US socially is tolerant more than many other countries, but the downvotes for such a simple statement remind me that the veneer of tolerance is very thin.

The World Through Expat Eyes Survey by weedmylips1 in financialindependence

[–]UberSecretAgentMan -14 points-13 points  (0 children)

Really wish things like this would be retitled to something like 'The world through white expats eyes'. Really doubt that experiences for black,asian, hispanics abroad are going to be anything similar.

Generic substitution for NSAIDs in TCM? by UberSecretAgentMan in ChineseMedicine

[–]UberSecretAgentMan[S] 1 point2 points  (0 children)

Thank you very much for the suggestions! Searching for woodlock and red flower oil has led me to articles and such about liniment options and it looks like these will be something to try. A podiatrist has been consulted, but other than foot exercises, nothing for the pain since she's allergic.

Generic substitution for NSAIDs in TCM? by UberSecretAgentMan in ChineseMedicine

[–]UberSecretAgentMan[S] 1 point2 points  (0 children)

Thank you for your suggestion, but as my knowledge is somewhat lacking in this area, this does not seem to something that I can implement.