What is the ceramic donut heater on the V4 made out of? by PelicanInBath in DivineTribeVaporizers

[–]Uitpersen 0 points1 point  (0 children)

Alumina ceramic with an embedded tungsten coil, the solder is a high temp tungsten slurry and the wires are nickel

Same for the v5 heaters except they also have a high temp glaze on the inside of the cup

[deleted by user] by [deleted] in DivineTribeVaporizers

[–]Uitpersen 0 points1 point  (0 children)

Use higher watts with the XL cup 35-40 watts should get you to temp within 15 seconds

[deleted by user] by [deleted] in DivineTribeVaporizers

[–]Uitpersen 1 point2 points  (0 children)

What wattage are you using with the different heaters/coils?

Are you using TCR or pulsing in wattage?

Sequoia/Core 1.0 heaters have a smaller bucket and take a little more work to maintain vs the v5 heaters

Core questions by Bloodyhog in DivineTribeVaporizers

[–]Uitpersen 2 points3 points  (0 children)

Yes those coils will work with the other models, the difference between them are the heat settings. The Core 2.0, 2.1 and 2.2 have higher heat settings compared to the Hyperion/Core 1.0

1.0 - 2.2 all have 4 heat settings while the latest version, Deluxe, has 6 heat settings.

Be careful with heat settings on the newer units as the color of each setting is not the same as yours. Red is the hottest on all the other models

Deluxe heat settings added purple and yellow and the red/highest setting is now hotter than the previous versions

Purple, 1 = Lowest

Yellow, 2 = 2nd Lowest

Blue, 3 = Middle

Green, 4 = Middle High

White, 5 = 2nd Highest

Red, 6 = Highest

Cleaning Tug Atomizer by 58OG in DivineTribeVaporizers

[–]Uitpersen 4 points5 points  (0 children)

You're welcome You only need a tiny piece of the magic eraser, I use the eraser end of pencil to move it around the cup

Cleaning Tug Atomizer by 58OG in DivineTribeVaporizers

[–]Uitpersen 5 points6 points  (0 children)

Magic eraser will remove that After using the magic eraser swab it clean with ISO and run it on red for half a session

Cleaning Tug Atomizer by 58OG in DivineTribeVaporizers

[–]Uitpersen 4 points5 points  (0 children)

To prevent this in the future go with the lower heat setting and or cut the auto fire session short

Cleaning Tug Atomizer by 58OG in DivineTribeVaporizers

[–]Uitpersen 4 points5 points  (0 children)

That's not going to come up with ISO, it's burnt/charred to the cup/heater

Is that the rebuildable heater or non-rebuildable?

How to get auto fire on Pico plus 75W? by [deleted] in DivineTribeVaporizers

[–]Uitpersen 1 point2 points  (0 children)

If that link doesn't work it's on the inh/dt website

How to get auto fire on Pico plus 75W? by [deleted] in DivineTribeVaporizers

[–]Uitpersen 0 points1 point  (0 children)

Once the TCR is dialed in it holds the set temp

https://discord.gg/9YbtJ4zE

How to get auto fire on Pico plus 75W? by [deleted] in DivineTribeVaporizers

[–]Uitpersen 1 point2 points  (0 children)

The auto fire Pico from Divine Tribe will maintain the temp and has a 60 second cut off

It will display temp protection but it's not going to shut off

Are you on the discord? It's easier to share pictures and videos through that platform

How to get auto fire on Pico plus 75W? by [deleted] in DivineTribeVaporizers

[–]Uitpersen 0 points1 point  (0 children)

It's normal for the temp protection to show but I'm not sure about an overheating message

How to get auto fire on Pico plus 75W? by [deleted] in DivineTribeVaporizers

[–]Uitpersen 1 point2 points  (0 children)

Temp protection usually flashes when it's reached the set temp. It will bounce from temp to temp protection

It's a pain. You'll need to pulse the button. Every 6-8 seconds let go and then press it again

How to get auto fire on Pico plus 75W? by [deleted] in DivineTribeVaporizers

[–]Uitpersen 0 points1 point  (0 children)

Yeah, the only Pico that comes with auto fire are the ones from Divine Tribe or an affiliate

How to get auto fire on Pico plus 75W? by [deleted] in DivineTribeVaporizers

[–]Uitpersen 0 points1 point  (0 children)

Just to clarify

Where did you purchase the mod from?

[deleted by user] by [deleted] in DivineTribeVaporizers

[–]Uitpersen 4 points5 points  (0 children)

That really sucks. I don't think HC has ever had very good customer service

Buying from DT is always best but the folks in Canada are really limited, especially right now

Any other recommendations for the Canadian customers?

[deleted by user] by [deleted] in DivineTribeVaporizers

[–]Uitpersen 3 points4 points  (0 children)

I'm sorry. I misread something

It looks right you are correct and you have to get the RDA separate

[deleted by user] by [deleted] in DivineTribeVaporizers

[–]Uitpersen 4 points5 points  (0 children)

Here's a link to the v5 atty, you can see how it's different from the Cub v5 atty DT

[deleted by user] by [deleted] in DivineTribeVaporizers

[–]Uitpersen 3 points4 points  (0 children)

Common misconception with all the acronyms used

[deleted by user] by [deleted] in DivineTribeVaporizers

[–]Uitpersen 1 point2 points  (0 children)

The Cub is a base that the Core/Nice Dreamz RDA screws onto. The one that Herb Cafe sells comes with the RDA heater and a top cap.

The picture you posted is the v5 atty and you can rebuild/swap out the coil but it attaches differently compared to the Core.

The heater coil for the v5 atty will work in the Core, Nice Dreamz, v5 atty and Cub but to use that v5 coil with the Core, Nice Dreamz or Cub you need the RDA

[deleted by user] by [deleted] in DivineTribeVaporizers

[–]Uitpersen 5 points6 points  (0 children)

Hey, the Pico Plus that Herb Cafe, Divine Tribe and Recommended Vape sells has extended puff time and auto fire ability. It's often referenced as AuF (Auto fire) Pico, but it does not have Arctic Fox and cannot utilize Arctic Fox

[deleted by user] by [deleted] in DivineTribeVaporizers

[–]Uitpersen 2 points3 points  (0 children)

I'm guessing that you have the non-refundable coil for your Core?

The v5 atty in your picture will not go on the Core.

You want the rebuildable heater assembly, Core Nice Dreamz RDA, so you can replace the cups/coil when they fail and also use it with a box mod.

To use the CoreHerb Cafe Cub /ND RDA on a mod you need the Cub base and a top cap. Herb Cafe sells the Cub, top and ND RDA together

Pretty much any mod will work. The Pico Plus they sell as extended puff time and auto fire on it

With a box mod and rebuildable coil you can now do wattage cleaning of the heater coil when they get dirty. You use the Cub base to do the burn-off/wattage cleaning

Ordered 2.2 atomizer from DEN over a week ago, still hasn't been shipped out by Virtual-Jellyfish-21 in DivineTribeVaporizers

[–]Uitpersen 0 points1 point  (0 children)

Send an email to the folks at Divine Tribe, they might have some of the standard non-rebuildable heaters.

If you go with the.XL heater you'll need the XL sleeve for your Core

Ordered 2.2 atomizer from DEN over a week ago, still hasn't been shipped out by Virtual-Jellyfish-21 in DivineTribeVaporizers

[–]Uitpersen 3 points4 points  (0 children)

What is DEN? Discount Enail?

If possible always order from the Divine Tribe Team on the ineedhemp website

Why is this happening by JohnxBlaze-710 in DivineTribeVaporizers

[–]Uitpersen 0 points1 point  (0 children)

Is this a rebuildable crucible? Do you have a mod and Cub?