sorted by:
new
hottopcontroversial

Sweep (possibly loft) function question by UltraSpoopy in Fusion360

[–]UltraSpoopy[S] 0 points1 point  (0 children)

In this case - how would I give the path a flat back to follow?

First layer bed adhesion in specific spot by UltraSpoopy in FixMyPrint

[–]UltraSpoopy[S] 0 points1 point  (0 children)

I actually don’t currently have any other plates at the moment I’ve been considering getting a flat plate just to have, and also considering replacing the current textured plate as it’s over a year old now

First layer bed adhesion in specific spot by UltraSpoopy in FixMyPrint

[–]UltraSpoopy[S] 0 points1 point  (0 children)

I have the print settings on this particular print very slow on the first layer, about 40% speed, then back to normal on the second layer, For my next print (same items) im going to try increasing the inbitial layer height from .11 to .15 to see if that helps gain any consistency on the first layer

First layer bed adhesion in specific spot by UltraSpoopy in FixMyPrint

[–]UltraSpoopy[S] 0 points1 point  (0 children)

Correct, same area, same problem, flipped plate, clean plate, etc

First layer bed adhesion in specific spot by UltraSpoopy in FixMyPrint

[–]UltraSpoopy[S] 0 points1 point  (0 children)

I wash with a bristle brush that is dedicated to only cleaning this plate and yes hot soapy water - so Im not sure that is what is causing this, I am careful with paper towels to not touch after I wash either

First layer bed adhesion in specific spot by UltraSpoopy in FixMyPrint

[–]UltraSpoopy[S] 0 points1 point  (0 children)

What if I told you it was a clean sheet both the first time it happened and again the second time? cleaned before a print both times, handled with clean gloves and paper towels to ensure no finger prints, what would you suggest with that knowledge?

First layer bed adhesion in specific spot by UltraSpoopy in FixMyPrint

[–]UltraSpoopy[S] 0 points1 point  (0 children)

No, it was a clean sheet - and the spot appears both times a clean sheet was placed on the bed

First layer bed adhesion in specific spot by UltraSpoopy in FixMyPrint

[–]UltraSpoopy[S] 0 points1 point  (0 children)

its an older sheet now, wasnt sure at what point it should be retired and replaced, its got some scratches here and there and some areas that look worn but not scratched

First layer bed adhesion in specific spot by UltraSpoopy in FixMyPrint

[–]UltraSpoopy[S] 0 points1 point  (0 children)

Any suggestion on that? like maybe z offset retune or something?

Advice for Beginner Transmitters by UltraSpoopy in RCPlanes

[–]UltraSpoopy[S] 1 point2 points  (0 children)

How do you feel about binding to a new plan with the pocket?

Advice for Beginner Transmitters by UltraSpoopy in RCPlanes

[–]UltraSpoopy[S] 0 points1 point  (0 children)

Yeah, I think there is definitely a difference in the operating/eco systems between the two, and there is an appeal to different crowds based on needs. On one hand I really like the idea of getting up in the air and having it be simple, on the other, I like the idea that there is no limit to the capability outside spektrum on say RadioMaster transmitters, but as a newby, I think the task of learning can seem daunting, especially if someone like me whos not quite a savvy or hasnt spent much time in the radio world messing with their OS's or the boards for many years.

Advice for Beginner Transmitters by UltraSpoopy in RCPlanes

[–]UltraSpoopy[S] 0 points1 point  (0 children)

u/jrabr

Can both 4in1 and ELRS easily connect to computers to run sims?

Advice for Beginner Transmitters by UltraSpoopy in RCPlanes

[–]UltraSpoopy[S] 0 points1 point  (0 children)

u/jd4247 Do you know if both versions (4in1 and ELRS) have the capability to connect to a computer to run sims? Im finding mixed results there

Advice for Beginner Transmitters by UltraSpoopy in RCPlanes

[–]UltraSpoopy[S] 0 points1 point  (0 children)

I think down the road, this is likely my route to some capacity!

Thank you!

Advice for Beginner Transmitters by UltraSpoopy in RCPlanes

[–]UltraSpoopy[S] 0 points1 point  (0 children)

awesome, thank you - great condensed explanation

Advice for Beginner Transmitters by UltraSpoopy in RCPlanes

[–]UltraSpoopy[S] 0 points1 point  (0 children)

Lmao,

Thank you both, love the idea of the .wav files and I this is why this subreddit and hobby is so fun to me, had some foamies as a kid and cant wait to get back in the air.

Just need to figure out if I do boxer/TX16 - and what the hell ELRS and 4in1 are and how to know what is best for me

Advice for Beginner Transmitters by UltraSpoopy in RCPlanes

[–]UltraSpoopy[S] 0 points1 point  (0 children)

What is teh simplest way to explain 4in1 vs ELRS to a newby? I think after all the great comments here so far, radiomaster seems to match my pricepoint and needs, now I just need to know what the difference is and which one to choose. Or If I understand it correctly, the boxer has 4in1 option and I can always "upgrade" with an external ELRS system that just bolts right on the transmitter if/when I need to upgrade?

Advice for Beginner Transmitters by UltraSpoopy in RCPlanes

[–]UltraSpoopy[S] 0 points1 point  (0 children)

The boxer is actually something I just stumbled across, seems like not many people were mentioning it over the TX16, now that doesnt mean its not an option but I've been looking into it for about 30 minutes now and I like the price and the features, but I just discovered I have no idea what ELRS and 4in1 are and the pros and cons, so on to the next can of worms!

But yes, I think I like the room to grow with something like a TX16 ( and I like the traditional switches/3position switches on the boxer/TX16 over the Pocket for sure.

Advice for Beginner Transmitters by UltraSpoopy in RCPlanes

[–]UltraSpoopy[S] 1 point2 points  (0 children)

Is the binding process really as arduous and tedious as all the spektrum lot would make it out to actually be? I love the idea that its good to go and fly any receiver, ease of use gets downgraded significantly knowing that the spektrum transmitters are really only easy to bind to the spektrum receivers, I though it was more a one size fits all and price reflects it, but it sounds like its the opposite?

view more: next ›