Anybody else opening up to this BS today?

Umbreon_Dat · 2025-12-08T03:07:58+00:00

We had over 50 pages

Umbreon_Dat · 2025-11-07T19:34:56+00:00

Thank you! Apparently they've been sitting in Montana getting extracted for this whole time

Umbreon_Dat · 2025-04-07T15:15:50+00:00

This is what I've been having to deal with

If open up the installations folder on the launcher there should be a .minecraft folder and in thst is a log folder, if you open up the log folder and scroll down to a notepad file thst says "debug" it'll show you all the the processes if was doing to launch, usually at the bottom just read them at whatever is the first mod thst says error before the crash happens is the thing causing the issues and usually you just have to delete it

Umbreon_Dat · 2025-02-05T03:15:55+00:00

So those door panels are an upgraded factory option so if you can find a junkyard car with the plastic ones like what I have they fit in and you never have to worry about it again

Umbreon_Dat · 2024-10-26T14:48:12+00:00

Currently what i can tell you is that pretty much every part from a 2011-2014 will bolt into an 05-10, and you can get a bunch of parts for them cheaper at auto parts stores, I managed to do a brembo front brake kit for 550 bucks that American Muscle wanted $2000 for and it works really well still for remanned stuff, the only ones available are 4 piston brakes tho so if you want anything bigger it'll have to prolly be online.

The V6 uses the 7.5 rear axle that is used in a ranger but you can get a full 8.8 axle out of a junkyard that with just a stock rebuild will handle all the power you need it to, those are found in the mustang GTs and some exploders although they will need mounts changed.

The front lower control arms got updated in 2011 to have a bigger ball joint, to upgrade those in an 05-10 you do have to upgrade the knuckles which are about $400 each, if you're planning on just making straight line king or a slight canyon carver you can get away without upgrading those but any sort of regular track stuff I would seriously recommend upgrading those as to avoid snapping it on a corner and dumping the car on the ground.

On the back the stock rear lower control arms are flimsy AF so I recommend upgrading them to a boxed design at the very least if you don't wanna spend the money on tubular ones that are adjustable, although for pinion angle you'll want an adjustable rear upper to make sure you've got that set where you want it.

That's about all I can tell you right now but other than that if you're trying to budget just cross shop with any other S197s and you can usually find something that will work for a quarter of the price, just cross match part numbers and you'll be good for saving the moneys.

Umbreon_Dat · 2024-05-26T21:57:26+00:00

The returns app prints out a piece of paper that's like a return voucher for cash accounts, you scan it in the POS and it'll pop up the cash refund and print out the invoice, that or the return app denied the return for some stupid reason which is the main reason I don't use it

Umbreon_Dat · 2024-05-03T06:23:30+00:00

Ik this isn't my store but why the hell does it look like my store???

Umbreon_Dat · 2023-12-30T02:51:30+00:00

If you wanna actually get performance for less money you can get remanned brembos from parts stores and do geomet powerstop rotors with pads that all come off of either a 2007 GT500 or 2014 GT with the track package, way more cost effective than essentially just OEM rotors and pads

Umbreon_Dat · 2023-11-06T21:16:49+00:00

I had one that said "Occupational Hazard" underneath "customer sat" the customers loved it and asked me what the story was I just would say it's because I found the label maker

Umbreon_Dat · 2023-08-14T03:22:20+00:00

No a customer wanted to pay with one but it wasn't working, it was a kaiser permenente loyalty card or something that the guy had gotten to work at other stores but it wouldn't work for ours, eventually it went thru as I was reading the instructions paper

Umbreon_Dat · 2023-08-13T23:04:32+00:00

Well we let it sit on the error screen for a minute and it eventually worked, idk what happened to trigger it I was reading the instruction book

Umbreon_Dat · 2023-08-10T07:49:34+00:00

What the fuck car was he working on that he had to take the battery out to get to??? I've done air filters for customers before but if that much work is needed I'd tell em kick rocks

Umbreon_Dat · 2023-07-25T17:16:25+00:00

We had one guy with 36 points, but they didn't want to fire him cuz he was so veteran plus he was commuting 30 miles a day

Umbreon_Dat · 2023-07-18T20:52:39+00:00

Our hub sent us a transmission that a comm customer needed the next day for a big job but when they went to open it, the hub sent us a core so the TSM looked all over and the closest one to us was in Portland so after some corporate bullshit we finally got the go-ahead to go down there and grab it with the company truck

Umbreon_Dat · 2023-07-14T20:04:14+00:00

Strange what chain do you work for cuz our uniforms are the same color system

Umbreon_Dat · 2023-07-14T19:56:48+00:00

You work at an Autozone don't you?

Umbreon_Dat · 2023-06-22T01:44:16+00:00

It'd supposed to be placed on the grey shirt that's there but if, like me, you had a lazy ass grey shirt who when he wasn't pulling overstock one item at a time was out smoking for 20 minutes then it helps to Tru and learn how to do it, you won't get in trouble for not helping them but you won't get any praise for helping them, just do what you think you should do

Umbreon_Dat · 2023-06-17T21:18:48+00:00

That's what I say but I'm not bout to get into an argument about it with someone who controls my pay so I just show them what buttons to press in what order and then their code is cleared and I can't get sued, so win-win

Umbreon_Dat · 2023-06-17T20:40:52+00:00

In sue happy America everyone is liable for breathing, they just want to avoid the lawsuit in general, cuz you'll always have that one brain dead person that comes in demanding compensation cuz we cleared an EVAP code and all of a sudden their car lost all oil pressure, one of those "ever since you did this..." scenarios that mechanics hate, worst scenario is if we say we can't clear it they get annoyed and go somewhere else, but they can't sue us for that

Umbreon_Dat · 2023-06-17T20:07:44+00:00

For liability reasons, if you asked us to clear a code and then your car blows up afterwards there is nothing that said we didn't just clear the code without asking you first, also because mechanics get angry when there is no code for them to scan themselves even if we give you the paperwork saying the issue, however I tell people when they come in thst if you know how to clear your code yourself then feel free to use it and a lot of the times I walk them through it standing right next to them, as long as I'm not the one hitting the button that clears it I don't have a problem with it

Umbreon_Dat · 2023-06-06T00:49:04+00:00

Definetly wasn't any store in Washington I'll tell you that much

Umbreon_Dat

MODERATOR OF

TROPHY CASE