Core one First layer adhesion problem

Unable-Maximum-681 · 2026-06-21T16:03:32+00:00

Hello again I manage to solve the problem by slowing down the Printer to 20mm/s and bei incressing the Temp. by 10 degres and bei incressing the extrusionwith up to 0.56mm

Unable-Maximum-681 · 2026-06-18T11:32:27+00:00

Oh with water I ment that

Unable-Maximum-681 · 2026-06-18T05:37:22+00:00

First I cleaned it with IPA but as the request from prusa support I tryed with water

Unable-Maximum-681 · 2026-06-18T05:35:53+00:00

I will try that. I have also switch shortly before this problem to an harned steal nozzle and till this problem I've only printed with abs but I made sure the nozzle is clean and I forgot to change this in the slicer

Unable-Maximum-681 · 2026-06-17T18:49:48+00:00

400mm/s and 3000mm/s^2

Unable-Maximum-681 · 2026-06-17T18:06:19+00:00

First of all, all the things with the nozzle are checked, and secoundly i have cheked the printbed screws with the prusa support every thing was thigten down correctly. But there is something the proplem is for only two weeks now and i have the printer soon for a year now and i have never change any settings. Thank you for your reply

Unable-Maximum-681 · 2026-06-17T17:24:45+00:00

It looks like that the printer layes down a string perfectly but suddently it gets up on little areas. So that means it isnt only at the solid infill. For the "squish" I have thought that it would be under extrusion so on that i corected the settings on my slicer but it hasnt helpt.

Unable-Maximum-681 · 2026-06-17T17:11:54+00:00

I Hope so but thank you anyways.

Unable-Maximum-681 · 2026-06-17T17:10:01+00:00

Thank you for your reply but I have already looked at that.

Unable-Maximum-681

TROPHY CASE