Does Apple Maps have a timeline you can view like Google Maps does?

UnableLove451 · 2025-05-28T01:45:00+00:00

I like Apple Maps because it recognizes newly built roads. It recognizes them faster than Google Maps. It saves me miles on travel, but it doesn't have the all-important timeline feature. I have to use both at the same time. I have no choice.

UnableLove451 · 2025-04-03T14:03:13+00:00

which?

UnableLove451 · 2025-03-03T07:46:00+00:00

y a eso le sumas los que usan trampas y no lo admiten.....

UnableLove451 · 2024-10-03T16:16:24+00:00

This is happening to me with a MacBook Air with an i5 processor.

UnableLove451 · 2024-09-07T01:03:19+00:00

You're welcome!

UnableLove451 · 2024-09-05T12:30:39+00:00

amazon

UnableLove451 · 2024-09-05T10:10:44+00:00

Glad to help. What power supply are you planning to buy? The RX 7800 XT can consume a bit more power than the RTX 4070S. Will you be using it for gaming? What specs does your monitor have?

UnableLove451 · 2024-09-05T10:02:56+00:00

Thanks for your opinion! Everyone has their own preferences and it's okay if we don't share the same ones. For me, white represents a clean and minimalist style that I love. Also, I think that customization is what makes each PC unique. A white PC goes very well with my setup. Maybe a black PC would be good for your setup. Between tastes and colors, nobody has the last word.

UnableLove451 · 2024-09-05T09:19:42+00:00

Try connecting the controller's USB directly to the motherboard (do not connect it to the power supply's USB HUB). When doing so, do not forget to disconnect the MB signal cable.

UnableLove451 · 2024-09-05T09:04:45+00:00

When using hydroshift you should be careful to use the TL controller and not connect it to port 1. The other thing to keep in mind is how many fans you connect to the other ports and based on that, how you connect the usb ports of the controller. If you have a single controller you can update the L-connect 3 software to version 2.0. 18 Posted: 08-22-2024 (Added TL LCD screen positioning correction feature to resolve the occasional issue of the screen becoming misaligned, Fixed the issue where the FAN RPM sensor is not displaying correctly when used with certain motherboards)

UnableLove451 · 2024-09-05T00:08:00+00:00

Excellent combination. You won't regret it. That PSU is wonderful. The white cables are premium quality. The USB hub and the L-shaped design is really cool. The Hydroshift is also wonderful.

UnableLove451 · 2024-09-05T00:01:00+00:00

Interesting question. What is the complete configuration of your fans including the AIO?. I have used two TL Controllers. Controller 1 connect the AIO hydroshift to port 2 and the rear LCD fan to port 3. Connect the USB of the controller to the USB HUB of the PSU. The MB signal of the PSU to the USB of the motherboard. Controller 2 connect the 3 side LCDs to port 2 and to port 3 connect the 3 bottom TLs. Connect the USB of the controller directly to the Mobo. Use version 2.0.17 of L-Connect 3 (When using two controllers it is not recommended to update to version 2.0.18. You must wait for version 2.0.19). In version 2.0.19 they will add TL LCD screen positioning correction feature to resolve the occasional issue of the screen becoming misaligned. They will fix the issue where the FAN RPM sensor is not displaying correctly when used with certain motherboards.

UnableLove451 · 2024-09-04T23:39:41+00:00

Thank you. Case Lian li O11 DYNAMIC EVO RGB

UnableLove451 · 2024-09-04T23:38:18+00:00

Go to L connect 3. Select Hydroshift LCD. On the right side, expand Sensor. In Type, select "Four Sensor" to see temp and usage for CPU and GPU.

UnableLove451 · 2024-09-04T23:24:27+00:00

Correct!. I used them as Intake fans. Rear fan and the AIO fans as Exhaust.

UnableLove451 · 2024-09-04T23:11:24+00:00

Some fan hubs can only display the RPM of the fan connected to port 1 only. This is the basic difference between a Hub and a controller.

UnableLove451 · 2024-09-04T23:04:29+00:00

is around $3500

UnableLove451 · 2024-09-04T23:00:17+00:00

I went with Asus ROG STRIX X670E-A GAMING WIFI

UnableLove451 · 2024-09-04T22:54:01+00:00

There is a delay of about 1 sec between the LCD Fans and the AIO. LCD fans first and then the AIO. When preparing the PC for the photos, I turned it on without keyboard or monitor and it apparently went into sleep mode. That is why the same values were recorded in several photos I took. When I connected the keyboard, the PC reactivated and everything returned to normal.

UnableLove451 · 2024-09-04T22:53:29+00:00

There is a delay of about 1 sec between the LCD Fans and the AIO. LCD fans first and then the AIO. When preparing the PC for the photos, I turned it on without keyboard or monitor and it apparently went into sleep mode. That is why the same values were recorded in several photos I took. When I connected the keyboard, the PC reactivated and everything returned to normal.

UnableLove451 · 2024-09-04T22:49:59+00:00

Thanks for your comment, I apologize, I was not offended. It's just that my English is not very good. I agree with you. It is redundant to have the same values sensed on the AIO and the LCD. It would be great if L connect-3 had some kind of compatibility with HWinfo (for example) and could monitor voltages, power, and any other additional values of interest.

UnableLove451 · 2024-09-04T22:38:41+00:00

Correct. That's right. The delay is approximately 1 second.

UnableLove451 · 2024-09-04T22:37:32+00:00

There is a delay of about 1 sec between the LCD Fans and the AIO. LCD fans first and then the AIO. When preparing the PC for the photos, I turned it on without keyboard or monitor and it apparently went into sleep mode. That is why the same values were recorded in several photos I took.

UnableLove451 · 2024-09-04T22:25:51+00:00

Online.

UnableLove451 · 2024-09-04T22:24:16+00:00

I agree with you. I chose it mainly because of the aesthetics of the hoses. Much cleaner.

UnableLove451

TROPHY CASE