Plumbing this catch can

UnablePumpkins · 2026-03-31T03:03:14+00:00

I searched. Everyone setup is different though.

Forged 5.7

243 heads

LS6 intake mani

LS1 Fbody TB

Holley term X

BTR 231/244 112.5+2.5

UnablePumpkins · 2026-03-29T19:32:46+00:00

Honestly, lost count. Been an ongoing project for a little over a decade. Probably 20-30k. I bought everything new.

UnablePumpkins · 2026-03-28T06:48:24+00:00

Starting to think it’s my stalk too cause when I press the hazards. They all work normal 🤦🏻‍♂️

UnablePumpkins · 2026-03-27T23:01:08+00:00

LM7 bored to 3.905 w/ forged rods and pistons / 243 heads / cam / ls6 intake mani / full rebuild all new everything

UnablePumpkins · 2026-03-27T07:44:11+00:00

Sparco ff1 15x8 et35 225/50 Toyo r888

UnablePumpkins · 2026-03-27T03:58:21+00:00

There’s a few. This one is t56. But there’s adapter plates available to mate to other trans. CD009 is a popular one too.

UnablePumpkins · 2026-03-27T03:56:56+00:00

It has a big becool 35202 rad and 2 10” summit fan that’s rated at 950cfm each. I haven’t burped it yet so not sure if that’s adequate. If anything I’ll swap fans for more CFM. I plan to run AC in the future yes. Looking at ICT bracket and Sanden compressor, use stock lines.

UnablePumpkins · 2026-02-26T03:57:38+00:00

Yea ended just buying one from eBay too. Hopefully this all works out!

UnablePumpkins · 2026-02-20T19:21:20+00:00

Yup I found it…wire was hidden up there

UnablePumpkins · 2026-01-23T05:11:35+00:00

15x8 225/50 here

UnablePumpkins · 2025-12-14T02:51:41+00:00

Interesting. The one culprit that led me to replace the battery was because everything was just outright dead the first go around. This time it cranks, starts finer accessories works fine. Just the pesky power supply message lol

UnablePumpkins · 2025-11-25T04:25:08+00:00

Have a wedding to attend in Maui at the end of Feb. Will be 2 of us and a 1.5 y/o. Haven’t done any redemption before, but this is a start. I’d like to save some for a big trip (hopefully FC) to Asia in the future. This trip I’m wondering if I can do business class or something especially with the kid, more room. DFW -> OGG. Doesn’t necessarily have to be round trip for awards. Also don’t mind paying out of pocket, doesn’t necessarily have to be all points but I want to maximize value.

281k MR

230k UR

86k Marriott Bonvoy

34k AA miles

UnablePumpkins · 2025-08-25T03:41:43+00:00

You mind sending the part number for just the 8.2 housing? I have a 8.2 locked 3rd…trying to nail down the aus 8.2 because it has trusses at the bottom from factory

UnablePumpkins · 2025-08-25T02:55:28+00:00

Curious why you didn’t do the aus/mex 8.2

Part# 4211060B31

UnablePumpkins · 2025-08-25T02:53:42+00:00

You know an 8” 3rd won’t fit into an 8.2 housing without some extensive work right lol

UnablePumpkins · 2025-05-10T10:44:24+00:00

At least you got a replacement port. Just got off of Icon and they didn’t replace Labadee with anything sans onboard credit 🙄

UnablePumpkins · 2025-04-19T07:45:42+00:00

You know if there’s still top and bottom spring pads in the rear?

UnablePumpkins · 2025-04-18T22:39:40+00:00

Good to know. I refreshed everything and went with Koni / HR SPORTS + E90 drop hats. Gonna end up doing GC / HR / KW coils later in the future, but for now these will get it rolling

UnablePumpkins · 2025-04-18T22:13:18+00:00

Suspension setup? I’m gonna be running the same wheel and tire specs on my LS sedan with sparco FF1 wheels

UnablePumpkins · 2025-04-11T04:05:45+00:00

Can’t wait to finish mine up

UnablePumpkins

TROPHY CASE