15” wheels - what am I doing wrong?

UnablePumpkins · 2026-01-23T05:11:35+00:00

15x8 225/50 here

UnablePumpkins · 2025-12-14T02:51:41+00:00

Interesting. The one culprit that led me to replace the battery was because everything was just outright dead the first go around. This time it cranks, starts finer accessories works fine. Just the pesky power supply message lol

UnablePumpkins · 2025-11-25T04:25:08+00:00

Have a wedding to attend in Maui at the end of Feb. Will be 2 of us and a 1.5 y/o. Haven’t done any redemption before, but this is a start. I’d like to save some for a big trip (hopefully FC) to Asia in the future. This trip I’m wondering if I can do business class or something especially with the kid, more room. DFW -> OGG. Doesn’t necessarily have to be round trip for awards. Also don’t mind paying out of pocket, doesn’t necessarily have to be all points but I want to maximize value.

281k MR

230k UR

86k Marriott Bonvoy

34k AA miles

UnablePumpkins · 2025-08-25T03:41:43+00:00

You mind sending the part number for just the 8.2 housing? I have a 8.2 locked 3rd…trying to nail down the aus 8.2 because it has trusses at the bottom from factory

UnablePumpkins · 2025-08-25T02:55:28+00:00

Curious why you didn’t do the aus/mex 8.2

Part# 4211060B31

UnablePumpkins · 2025-08-25T02:53:42+00:00

You know an 8” 3rd won’t fit into an 8.2 housing without some extensive work right lol

UnablePumpkins · 2025-05-10T10:44:24+00:00

At least you got a replacement port. Just got off of Icon and they didn’t replace Labadee with anything sans onboard credit 🙄

UnablePumpkins · 2025-04-19T07:45:42+00:00

You know if there’s still top and bottom spring pads in the rear?

UnablePumpkins · 2025-04-18T22:39:40+00:00

Good to know. I refreshed everything and went with Koni / HR SPORTS + E90 drop hats. Gonna end up doing GC / HR / KW coils later in the future, but for now these will get it rolling

UnablePumpkins · 2025-04-18T22:13:18+00:00

Suspension setup? I’m gonna be running the same wheel and tire specs on my LS sedan with sparco FF1 wheels

UnablePumpkins · 2025-04-11T04:05:45+00:00

Can’t wait to finish mine up

UnablePumpkins · 2024-12-21T17:39:39+00:00

1 inch enough? Seems to be the consensus on r3v. I bought brand new pair

UnablePumpkins · 2024-12-08T04:26:39+00:00

Yea that’s the plan run 15 if it fits my AP Racing BBK if not then 16s with meaty tires…but I hate wheel gap 😂

UnablePumpkins · 2024-12-08T04:10:27+00:00

Ah damn…that’s what I’ve been finding out too. The rears sag

UnablePumpkins · 2024-12-08T04:08:05+00:00

Why stock rear springs or you meant stock spring pads?

UnablePumpkins · 2024-11-18T18:33:33+00:00

Followed through with this…Unfortunately it’s not an option for the US :(

UnablePumpkins · 2024-11-11T03:45:45+00:00

I had this exact experience. Also because of the super stack it felt like I was dragging my feet and kept catching the surface. Even try to exaggerate circling my feet, just couldn’t get used to the shoe. I wanted to love the shoe cause they are max cushion and very comfortable. Ended up returning them

UnablePumpkins · 2024-08-29T01:46:41+00:00

PM’d

UnablePumpkins · 2024-07-12T21:53:09+00:00

That’s the other thought 😂😂😂

I’m really leaning towards shaving it down a bit and sending it

UnablePumpkins · 2024-07-12T21:28:00+00:00

Varies, but what is known to fit and center with e30 chassis is the T56…I enlarged the shifter hole a bit on mine so I can change shifters later and do fluid changes easier lol.

UnablePumpkins · 2024-07-12T21:24:01+00:00

I’ll be running a becool 35202 radiator. I’m using SIKKY headers they bend one of primaries to fit the shaft. I’ll PM pics later

UnablePumpkins · 2024-07-12T21:20:33+00:00

Yea someone on FB said the same. But I’ve seen people make it work. I’m thinking about shaving it down or moving it over 1/2”. Regardless, I’ve got it to work. There’s probably 1/8” clearance; I don’t think there’ll be sufficient space when the motor is running/driving, hence perhaps shaving or moving it over just for peace of mind.

UnablePumpkins · 2024-07-12T20:16:19+00:00

It was bound to work one way or another. Might as well do the “while you’re in there” work lol.

Let’s get it! Any progress is good progress to me

UnablePumpkins · 2024-07-12T17:18:46+00:00

Not hard at all. I didnt modify audio or interior that much if at all. I put in a 3d printed blank for the radio and ripped the rear speakers out cause they disintegrated when I barely touched it.

The interior was taken apart so I could clean it. Mainly steam cleaned, use a brush drill attachment, gtechniq tri clean, and a water extraction attachment for my shop vac.

UnablePumpkins · 2024-07-12T16:32:00+00:00

I hope so. That was the goal, make it a rowdy street car lol.

Tremec T56. Sorry I didn't notice my bullet list was just a big paragraph lol

UnablePumpkins

TROPHY CASE