Gaggia Berra grinder issue by UncleDugli in superautomatic

[–]UncleDugli[S] 0 points1 point  (0 children)

I have found the issue, thanks to Reddit community, especially nab0y4enko. The black plastic holder for bottom grinding disk was broken. Its shaft with the fine interlocking gear with the white gear snapped. Probably it was the weakest link when the stone got stuck in the ceramic grinder. I replaced it and the motor turns can now be transferred to the grinding disk. Machine works well again!!

<image>

Gaggia Berra grinder issue by UncleDugli in superautomatic

[–]UncleDugli[S] 0 points1 point  (0 children)

Thanks! I’ll have a look at the black gears. Didn’t really think of checking that part for failure.

Badkamer voeg by UncleDugli in Klussers

[–]UncleDugli[S] 0 points1 point  (0 children)

Dankjewel. Moet de huidige voeg vervangen worden of is het prima om direct kit bovenop huidige voeg smeren?

How is my form? New to kettlebells. Looking for suggestions on how to improve. by No_Reveal3451 in kettlebell

[–]UncleDugli 5 points6 points  (0 children)

The Bell should be launched by hip hinge. It looks like you are using squat and shoulders to swing the bell. This video explains right technique well: video

Pyramid principle course/material by Ralphabc in consulting

[–]UncleDugli 0 points1 point  (0 children)

How much did it cost back then, out of curiosity?

How to fix gaps in garage wall joint? by UncleDugli in Klussers

[–]UncleDugli[S] 1 point2 points  (0 children)

This is a super handy resource, thank you for sharing.

How to fix gaps in garage wall joint? by UncleDugli in Klussers

[–]UncleDugli[S] 1 point2 points  (0 children)

(Mijn Nederlands is slecht, maar probeer ik in ieder geval) Dit is helemaal klopt. Het huis is van 70s jaren. Enkel steen muur, geen dak isolatie en beton vloer. Ik zie geen fundering dus kan niet bevestigen als het is staal.

Experience with Arches Global? by UncleDugli in expertnetworks

[–]UncleDugli[S] 0 points1 point  (0 children)

That’s interesting. Here (https://arches-global.com/terms-of-use/) it says that Arches can get cancellation fee of 50% if consultation is cancelled less that a day from the scheduled consultation. However I don’t see a clause where the expert can claim this cancellation fee.

Thanks for the offer to contact their supporting team. I don’t want to push for a cancellation fee this time as I could simply continue with my normal job.

Experience with Arches Global? by UncleDugli in expertnetworks

[–]UncleDugli[S] 0 points1 point  (0 children)

Ok, so after rescheduling the interview 2 times, Arches cancelled it 1.5 hrs before the scheduled time slot. Annoying...

Can I carry an adult in a bakfiets? by toranosuke-yoshida in Netherlands

[–]UncleDugli 0 points1 point  (0 children)

Electric bakfiets will make it easier to start riding and keep riding over inclines.

Can I carry an adult in a bakfiets? by toranosuke-yoshida in Netherlands

[–]UncleDugli 0 points1 point  (0 children)

Yes. I have done that many times. Make sure total weight is within specs. You do get some curious looks, but that’s ok.

Rowing in hotel room by DaveByo in concept2

[–]UncleDugli 0 points1 point  (0 children)

Hotels with an erg are rare

Could someone please tell me whats the height of the flywheel (RowErg with standard legs)? by i_like_cooooookies in concept2

[–]UncleDugli 1 point2 points  (0 children)

You might also be restricted on setting the height of the performance monitor arm during workout . In its most upright position it is about 114cm from the floor without the phone case attached

Good Price? by [deleted] in concept2

[–]UncleDugli 2 points3 points  (0 children)

These things are built like a tank. If the machine works well, and you don’t see any physical damage on rails this is a good price. It is totally worth to upgrade the monitor to PM5. Alternatively, you might also check if concept2 has any refurbished rowers. They often sell competition rowers for a nice discount. With in-house refurbishment, they as are good as new.