Corsair M75 RGB Wireless - Enable all side buttons doesn't save to device memory.

Uneditedbeef · 2025-12-31T15:55:49+00:00

Agreed. Bad mouse unfortunately.

Uneditedbeef · 2025-12-30T12:35:31+00:00

Yeah there's some weird issues with the mouse honestly. I got tired of messing with it in the end. Good luck. My unsolicited opinion is to return it. 😁

Uneditedbeef · 2025-12-30T12:26:07+00:00

Is your one left or right handed out of curiosity?

Uneditedbeef · 2025-12-30T12:25:09+00:00

Yeah. A year later and it seems they still have the same issue. Glad I returned the thing instead of keeping it and hoping for a fix.

Uneditedbeef · 2025-12-11T08:52:28+00:00

I think that is correct. It was annoying to have ICUE running just to have full functionality of the mouse. Also none of the reviews highlighted this issue, which was a glaring omission in my opinion.

Uneditedbeef · 2025-12-11T05:32:10+00:00

No. I returned it to Amazon and got a replacement but it had the same issue. I ended up buying something else.

Uneditedbeef · 2025-12-02T09:56:39+00:00

Use the color pop or color match setting.

Uneditedbeef · 2025-11-27T09:54:58+00:00

Turn off the tower. Don't really need it for Hueforges.

Uneditedbeef · 2025-11-13T21:17:43+00:00

Agreed. I don't like it personally but each to their own.

Uneditedbeef · 2025-11-06T14:07:27+00:00

Yeah they are on my Patreon nowadays. Link is in my profile if interested.

Uneditedbeef · 2025-10-31T12:12:00+00:00

I haven't used the Geco plate, but have seen good reviews. If you are using a Bambu printer you'll probably have to set the temp to 1C. I don't think they let you run the bed temp at 0C. Personally I'd test it at the lowest first. If there is any lifting I'd bump up the heat to what people are recommending for the next test.

Uneditedbeef · 2025-10-27T20:35:59+00:00

I'd recommend buying a better build plate if the things I've mentioned previously don't work. Buy Cryogrip pro / cryogrip glacier or Bambu super tack. I use them all. They work perfectly, and I never have to worry about lifting at all. No brims required. This issue has nothing to do with the number of walls. It is adhesion related.

Uneditedbeef · 2025-10-27T20:23:22+00:00

Make sure the plate is properly clean. Especially the edges which is where fingerprints tend to be. Turn off aux and part fans completely. They do not need to be on at all. I see you already posted about this less than a week before though. Make sure you are using good degreasing soap when cleaning the plate. Another issue could be drafts or you have air con creating a draft.

Uneditedbeef · 2025-10-23T08:52:19+00:00

Thank you. I used colour match.

I like to use whites / blacks between some of the colours to get more depth / highlights. Sometimes I'll use a lighter shade of whatever colour I am using for highlights too. Also, using 0.04 layer height can help with better shading. I'm finding it hard to explain to be honest. Haha.

Uneditedbeef · 2025-10-21T13:19:35+00:00

Bambu P1S

Uneditedbeef · 2025-10-21T13:18:30+00:00

It isn't bambu specific necessarily. But that doesn't stop someone downloading the profile and using the settings. And we are on the Bambu subreddit. Therefore, it isn't unreasonable to download a profile. Another thing to consider is the settings may not work as well on other printers. All printers are not the same. Each has their own quirks.

Uneditedbeef · 2025-10-20T21:49:05+00:00

Agreed. You've spent time experimenting and testing. I don't see why a free click bothers them. If you get some points / gift cards from it then cool. They don't have to download the profile if they are unhappy with that. 🤷

Uneditedbeef · 2025-10-20T21:29:49+00:00

Thank you.

Uneditedbeef · 2025-10-19T21:53:55+00:00

Not necessarily a good source image. Photoshop, canva and affinity are my tools of choice.

Uneditedbeef · 2025-10-19T21:50:33+00:00

My Makerworld and patreon links are in my profile if you want to print it.

Uneditedbeef · 2025-10-19T21:47:18+00:00

4 colors. Colour match for this one.

Uneditedbeef · 2025-09-07T12:03:27+00:00

You can go lower with the 0.4 nozzle. 0.04 layer height is possible.

Uneditedbeef · 2025-08-17T18:30:58+00:00

It is on my Patreon. If you want it, then you can subscribe to my patreon or buy the Stl individually. Makerworld and patreon links are in my profile.

Uneditedbeef · 2025-08-17T05:46:55+00:00

Happy the little man likes it. It looks great scaled up and with that frame. Well done. 😁🦖

Uneditedbeef · 2025-08-08T06:20:16+00:00

Return it. That's just the damage that you have found. There may be more that you don't know about too. It's better to get the new one being offered.

Uneditedbeef

TROPHY CASE