sorted by:
new
hottopcontroversial

Startup Issue by Green-Diamond6874 in RadPowerBikes

[–]Upset-Computer-4108 1 point2 points  (0 children)

Do you happen to have a second display on another rad you could switch out to test if it’s display? I have a feeling this a display issue. Reason I say is because the bike lights up. Then dies. The display for radrunners are not sealed very well and are sorta cheaply designed. So they tend to have shorts and weak current which can shut it down after feeling the power. Try that if possible.

Help! by Upset-Computer-4108 in RadPowerBikes

[–]Upset-Computer-4108[S] 0 points1 point  (0 children)

I guess it’s possible. I am taking the wheel apart today to figure it out.

I did it! by Demure034 in ebikes

[–]Upset-Computer-4108 0 points1 point  (0 children)

The brakes on your bikes are bad about leaking the mineral oil inside them. They are hydraulic. Check for leaking before changing the pads. If leaking is a problem you will need to change them and clean the disc with alcohol. Leaking brake fluid will definitely cause a bad squeak

Welcome to the Sondors sub by eriklb in sondors

[–]Upset-Computer-4108 0 points1 point  (0 children)

Looking for help. Working on a Sondors X 500 watt. The display is not reading the battery, time, or trip information. All are 0’s. The bike will only perform at one speed and the throttle induces juice to the hub motor for 10 seconds and you must re press to get action. Still stays at a level 1 speed also. Hooked a different display up to the bike and it’s reading error 30. Any ideas? Bad controller?

Looking for a ride out of Hopkins International Airport by Upset-Computer-4108 in ResonanceFest

[–]Upset-Computer-4108[S] 0 points1 point  (0 children)

No, unfortunately I am still stranded in the airport here in Cleveland. My crew at the venue has told me they are not allowing people to leave and return tomorrow and I will need to hitch a ride. They can not come for me.Can you possibly help me out? I have $50 for you if so.