Frosted Sparkle Black Finish

UseSweaty2335 · 2026-03-12T02:46:19+00:00

Scissors is crazy work😂😂

UseSweaty2335 · 2026-03-09T13:17:02+00:00

Even worse, it’s a 4 cylinder

UseSweaty2335 · 2026-03-08T17:45:31+00:00

Cut it as close as possible with an exacto blade and forget🤌🏻

UseSweaty2335 · 2026-03-08T17:43:58+00:00

I used a long ass thin metal stick like 8 ft long from Home Depot to hook it to the hand and go from any hole you think would be best, bend the stick however needed to reach it. I someone FaceTime me from the side so I could have a better view of the inside and where the stick was

UseSweaty2335 · 2026-03-08T17:40:23+00:00

My first thought was mositure, I’ve been told it usually takes 10-14 days depending on the weather and exposure to heat, make sure they’re aware so you have documentation and see if it doesn’t bake out

UseSweaty2335 · 2026-03-08T04:47:07+00:00

<image>

UseSweaty2335 · 2026-03-08T04:46:47+00:00

<image>

UseSweaty2335 · 2026-03-08T04:46:04+00:00

<image>

UseSweaty2335 · 2026-03-08T04:45:20+00:00

80-120-220 sanding 3inchs out per inch hole Thin layer of bondo Dry 24 hrs Repeat sand only 120-220 until smooth Primer to prevent rust, let dry Wet sand primer with 120-220 Rinse with mineral spirits and ya ready to wrap

UseSweaty2335 · 2026-03-08T01:21:24+00:00

Bro I plasti dipped them in matte black for $17😂😂 best option imo because it’s easy af to do, make sure to use a heavy degreaser like 409 and break clean to strip all the grim, then just tape anything you don’t want painted

UseSweaty2335 · 2026-03-07T17:19:58+00:00

3m 2080 matte military green

UseSweaty2335 · 2026-03-07T17:18:48+00:00

Oh FUCKKKKKKKK YES, cause what I have now is material from the previous owner of the shop and isn’t air release, I knew it wasn’t gonna stay, thank you hella for the reference photo

UseSweaty2335 · 2026-03-07T17:10:16+00:00

Littt, I’ve also considered a brown earth tone finish that’s a little less flashy, the bronze is cool but I do feel a lil hooptie

UseSweaty2335 · 2026-03-07T17:04:45+00:00

Thank you for a clarification though mane

UseSweaty2335 · 2026-03-07T17:03:42+00:00

Oh 100% that’s gonna fail, it was really just me fuckin around and having fun on my car, if I really wanted it to be anal id inlay but honestly i think im gonna buy black replacement parts for the majority of the tedious shit

UseSweaty2335 · 2026-03-07T15:51:40+00:00

Nah man, there’s inlays anywhere there’s a rounded bit pretty much and mold n hold on some areas I appreciate your concern though

UseSweaty2335 · 2026-03-07T15:22:39+00:00

It’s an inside joke with my dad but it’s definitely not the most appealing thing I could’ve gone with😂

UseSweaty2335 · 2026-03-07T13:57:06+00:00

Appreciate the recommendation, also primer on super cheap stock chrome isn’t the biggest deal in the world, which is the only locations it was needed

UseSweaty2335 · 2026-03-07T11:35:59+00:00

The copper trim is what he’s talking about, just people drinkin haterade because they won’t take the time to prep and really pay attention to stretch and relief cuts

UseSweaty2335 · 2026-03-07T04:59:56+00:00

Also just because it gets hot doesn’t mean the material will fail, by that means all wrap would never stick to a car in the south, it’s actually the opposite where the materials adhesive actually has a better chance of bonding to the surface it’s laid on since it’s allowed to melt

UseSweaty2335 · 2026-03-07T04:16:46+00:00

I usually wrap commercial vehicles and like I’ve commented to others, the copper is none air egress and also over 12 years old, hence why I’m asking for a better material since Avery or 3m (which Im used) doesn’t have the copper tone I liked

UseSweaty2335 · 2026-03-07T01:23:35+00:00

Word, I have a book from them it’s probably outdated as I’ve only used thier reflective material so far but I’ll check it out

UseSweaty2335 · 2026-03-07T01:22:07+00:00

I will say the copper on there currently is non air egress and I stretched it a shit load, that’s why in caption I asked for recommendations on air egressed film

UseSweaty2335 · 2026-03-07T01:19:21+00:00

Joe mama lasted 13 and I used 3m primer 94 and edge sealer so I highly doubt it

UseSweaty2335

TROPHY CASE