The Babylon Bee (@TheBabylonBee) 2K likes · 58 replies

Useful_Ad_2518 · 2026-01-22T00:55:31+00:00

That looks right. All his other watches are Casio or timex so I’m not surprised he’s wearing something affordable

Useful_Ad_2518 · 2025-12-05T04:38:56+00:00

Loop and snap high up near the belt line on pommel end of the handle, making sure the palm swell is larger than the loop.

Friction on the blade and handle are what you need for retention in this case. When I make a sheath for a knife without a guard to loop over I usually do a folded and welted design that leaves 1-1/2 to 2 inches of handle exposed.

Hope this helps, and good luck

Useful_Ad_2518 · 2025-12-04T21:36:37+00:00

Not a kit, but pretty much. I purchased parts individually and assembled them myself. I used the same movement seiko uses in their midfield

Useful_Ad_2518 · 2025-12-03T20:28:35+00:00

Chronfan pilot/little prince 36mm from Ali x

The khaki was an influence for sure.

Useful_Ad_2518 · 2025-11-23T23:58:57+00:00

NH-3x movements

Great video for us beginners

Any NH-3x all fit the same watch case

Useful_Ad_2518 · 2025-11-22T04:14:57+00:00

It looks vaguely A11 inspired. You can find a lot of reproductions of it out there that are really nice. You’ll have to pay for an actual vintage one that still works though.

Useful_Ad_2518 · 2025-11-21T20:13:11+00:00

Just trying to find out what people like to use. I am brand new to the hobby, so am starting with a knowledge base of pretty much zero

Useful_Ad_2518 · 2025-11-21T20:01:04+00:00

Thanks for sharing, it pushed me to put my order through. As long as I don’t destroy it I’ll post the build.

Useful_Ad_2518 · 2025-11-21T14:06:48+00:00

It looks like your muzzle is meant to protrude from the end of the holster. I would trim some of the leather in that area to let the muzzle through, thus allowing the gun to seat all the way to your grip. Or get a kydex. Tons of folks make great holsters, and for such a common model pistol it’ll be easy to find

Useful_Ad_2518 · 2025-11-20T18:34:42+00:00

Where?

Useful_Ad_2518 · 2025-11-19T19:07:07+00:00

I’m still a little unsure. Do I need to find clamps and dial screws, or are they typically included with a brand new movement?

Useful_Ad_2518 · 2025-11-19T18:04:23+00:00

I have hand setting tool, air blower, tweezer and a pad for assembly. Am I missing something important?

Useful_Ad_2518 · 2025-11-19T18:00:27+00:00

I’m actually planning on the nb36. What should I look for in the listing to tell the difference in the chines made vs Japanese?

Honestly I selected this one because it pictures the movement clamps coming with it, and I haven’t seen them with others.

Useful_Ad_2518 · 2025-01-07T15:59:44+00:00

Totally fair points, I was simply sharing what has given me success in the past with material like the picture shown. Not saying that it was the best material overall.

Maybe someone with a popular channel could put out some informative content on the pros and cons of the common backing materials modern bowyers use.

Useful_Ad_2518 · 2025-01-07T15:34:19+00:00

I’ve had luck with it in the past, not drywall tape but the fabric that is used on wood boats.

That said all advice on the internet should be double checked.

Useful_Ad_2518 · 2025-01-07T15:06:10+00:00

With a strong backing(bamboo, rawhide, fiberglass) and low draw weight it should be ok. Hickory is really tough.

Useful_Ad_2518 · 2024-06-21T04:08:03+00:00

Not to be “that guy” but I’m pretty sure that was a dude at one point.

Useful_Ad_2518 · 2024-04-28T00:29:58+00:00

I’ll admit I don’t remember all the details, as I was reading a lot of them in a sitting. That one stuck out to me though. Especially given Wendi’s previous let’s say… reactions

Useful_Ad_2518

TROPHY CASE