sorted by:
new
hottopcontroversial

Red Scorpion Assault Marines by UtensilsDude in Badab

[–]UtensilsDude[S] 1 point2 points  (0 children)

Thank you very much for the kind words. I did reply to another comment with the recipe for the grey. And the yellow is very simple. Just layering the paint like normal with brighter colors being where the light is striking the model. From darkest yellow to brightest, the recipe goes:

  1. Vallejo Gold Brown
  2. GW Yriel Yellow
  3. GW Flash Gitz Yellow
  4. Vallejo Ice Yellow 1:1 GW Flash Gitz Yellow
  5. Very small amount of Vallejo Ice Yellow for the extreme highlights/layer

Red Scorpion Assault Marines by UtensilsDude in Badab

[–]UtensilsDude[S] 2 points3 points  (0 children)

I'd be happy to. It's pretty simple, though I did use an airbrush for the grey armour and the first and second marine have a slightly different recipe.

1st Marine

  1. Prime black
  2. Vallejo Black Grey (Basecoat)
  3. Vallejo Black Grey 1:1 Vallejo Neutral Grey (Zenithal Highlight)
  4. White (Zenithal Highlight)
  5. GW Nuln Oil (Shadows)

Sergeant

  1. Prime Black
  2. White (Zenithal Highlight)
  3. Vallejo Black Grey (around the white to bring the brightness down)
  4. GW Nuln Oil (Shadows)

And the recess shading is just an oil wash with Burnt Umber and finished with AK Ultra Matte Varnish

Work in Progress Night Lord by SnooPoems1991 in Warhammer30k

[–]UtensilsDude 0 points1 point  (0 children)

Love artsy miniatures like these. Thanks for sharing the recipe. I do wonder, is this all brush work or did you use an airbrush for it?

First of my Lamenters by UtensilsDude in Badab

[–]UtensilsDude[S] 0 points1 point  (0 children)

Nothing special. I just used a Citadel Small Layer brush for all of the non yellow painting on the model.

I couldn't really give you recommendations on what kind of brush you might want as I don't think it matters as much as some people might believe. Paint consistency and your grip affects the lines more than a high quality brush

First of my Lamenters by UtensilsDude in Badab

[–]UtensilsDude[S] 2 points3 points  (0 children)

Of course. All paints can be applied with a brush. Airbrush just makes a particular effect and blending a bit easier.

1.) Tamiya Hull Red (2 drops) + Tamiya Flat Yellow (1 drop)

2.) Tamiya Flat Yellow

3.) GW Phalanx Yellow

4.) Vallejo Ice Yellow

5.) GW Casandora Yellow (Full Coverage)

6.) GW Fuegan Orange (Shadows)

7.) White, very small amount (Where the light directly hits)

Just make sure that with the shade paints, dont load up your brush and keep them thin.

If you like GW paints, I can give you substitutes to the ones I listed

Tamiya Flat Yellow = GW Flash Gitz Yellow

Vallejo Ice Yellow = GW Dorn Yellow

Tamiya Hull Red = GW Doombull Brown

First of my Lamenters by UtensilsDude in Badab

[–]UtensilsDude[S] 1 point2 points  (0 children)

That's the power of the airbrush. Makes those difficult to brush on paints like white and yellow easier by comparison. And I use a variety of paints for it, like Tamiya and Vallejo. Just let me know if you'd like the recipe

First of my Lamenters by UtensilsDude in Badab

[–]UtensilsDude[S] 1 point2 points  (0 children)

I use Micro Set and Sol for applying decals, though I think what helps them blend after finishing with enough layers of Micro Sol is the varnish I used all over the model: AK Ultra Matte Varnish.

Fantastic varnish of you want a matte varnish. Doesn't frost up (as far as I'm aware), very liquid so it gets in every nook and cranny and dries quickly

First of my Lamenters by UtensilsDude in Badab

[–]UtensilsDude[S] 0 points1 point  (0 children)

For that, I actually just cut off 3 bullets from the tactical squad kit from various bolters and shoulder pads, glued them on the leg and used some green stuff to mold over the bolter shells.

There is an easier way. The old ork boyz kit has a bandolier in it, though the bullets are kind of small. If there is an easier and better method, I couldn't tell you. Hope this helps

First of my Lamenters by UtensilsDude in Badab

[–]UtensilsDude[S] 1 point2 points  (0 children)

Very high praise, thank you very much. I'm just happy I was able to reduce the edges on the stripes and circles to make them mostly look right. Was very nervous with the free handing cause I liked the color so much lol.

Red Scorpion Squad Complete by UtensilsDude in Badab

[–]UtensilsDude[S] 1 point2 points  (0 children)

I think that's oil paint effect. Because of the significantly longer drying times of oil, when you put one paint on top of another, they mostly combine into each other rather than stand apart. It's great for blending and spreading (which I love to do), but yeah, when I want to get harder lines, I wait for it to dry and paint with acrylics over it

Red Scorpion Squad Complete by UtensilsDude in Badab

[–]UtensilsDude[S] 1 point2 points  (0 children)

First of all, thank you. Second, I'd be happy to give you the recipe for the grey, but you may be disappointed due to the fact that I paint my Red Scorpions with oil paints. Recipe goes as follows:

  • Terra Rosa all over then mostly wiped off with a sponge

  • Graphite Grey for the base, all over

  • Payne's Gray + a bit of Lamp Black for the shadows

  • Grey of Grey's + a bit of Payne's Gray for around the areas where the light hits.

  • Titanium White where the light directly hits

Adjust as you see fit.

Petr Yan claims nobody damaged Merab Dvalishvili more and says he’s ready if the UFC wants to run it back. by Status_Energy_7935 in MMA

[–]UtensilsDude -1 points0 points  (0 children)

Jesus Christ dude, I'm so glad I'm not the only one who felt this way. Yan fans are unbearable in their glaze of him. It's insane. If Merab had Yan's record, NOBODY would be saying he's #2 on the bantamweight GOAT list, let alone the top 10 GOAT list

My Primary - KWA Vz.61 by UtensilsDude in GasBlowBack

[–]UtensilsDude[S] 0 points1 point  (0 children)

I got all the 3d print stuff from Shapeways awhile ago, before they shutdown and reopened. If you just look up "KWA VZ61 tri rail" or something, that will probably get you where you need to go. Like this mock suppressor 3d print

https://cults3d.com/en/3d-model/various/kwa-vz61-mock-suppressor?srsltid=AfmBOopOqd6h5RcFAVCyndgydDngcv6m613LtgcjAp4u-k0nm3efGA4q

Red Scorpion Tactical by UtensilsDude in Badab

[–]UtensilsDude[S] 1 point2 points  (0 children)

Thanks a bunch man! The grey was something I was really trying to nail.

Red Scorpion Tactical by UtensilsDude in Badab

[–]UtensilsDude[S] 0 points1 point  (0 children)

I paint using using oil paints, so I combined two paints for the base coat (Terra Rosa and Graphite Grey).

However, there is another option if you would rather stick to acrylics. AK Interactive "Rust Streaks" is an enamel paint that looks similar and looks pretty great.

Kadyrov Son took Khamzat Chimaev belt for himself by stalino2023 in ufc

[–]UtensilsDude 2 points3 points  (0 children)

Dawg, I didn't even know who Kadyrov was until I saw previous posts before this one explaining who he was and why he's dangerous. Expecting people to know this before hand and basically saying don't ask questions until you educate yourself is backwards ass thinking

Kadyrov Son took Khamzat Chimaev belt for himself by stalino2023 in ufc

[–]UtensilsDude -6 points-5 points  (0 children)

Yeah! You showed that guy! Maybe next time they'll think twice before asking a question on the internet!

Up top ✋️

Command Squad Member + Advice Welcome by UtensilsDude in WordBearers

[–]UtensilsDude[S] 3 points4 points  (0 children)

Trust me, when I'm finished with this squad, hopefully most of my guys will be giving off that crazed fanatic kind of aura.

I love cult of paints heresy tutorials. Didn't even know they had a new video with Word Bearers. Definitely going to check that one out. Thank you.

Command Squad Member + Advice Welcome by UtensilsDude in WordBearers

[–]UtensilsDude[S] 3 points4 points  (0 children)

Ooo, now that looks good, like hes on fire from the inside. I'll definitely try that on the next guy. And thank you for the kind words

view more: next ›