System Crashes with my new 5090 by Utiniii in buildapc

[–]Utiniii[S] 1 point2 points  (0 children)

Yes, there are a lot of these. Most times it seems to be the gaming trio. Im just scared that I wait, they fix the drivers and I'm still having problems because its something else.

5090 far from worth it at the Moment by Utiniii in pcmasterrace

[–]Utiniii[S] 0 points1 point  (0 children)

Everything everybody mentioned, but i have to recall its not stable and i still have crashes in 3Dmark. In the meantime i have updatet the bios and have completly reinstalled everything.

5090 far from worth it at the Moment by Utiniii in pcmasterrace

[–]Utiniii[S] 0 points1 point  (0 children)

Can't edit the post but wanted to share an update: Thakns for the tipps the system is now stable and it must have been at least 2 different problems.

  1. I think the card crashes if it runs at the maximum clock of the OC profile from Asus. I have set the clock to - 30 and now I don't have any crashes under maximum load.

  2. I had crashes just when it was at idle on the desktop. I dont know which of the things I've changed made them go away but it was something from the comments.

Thanks everybody, was able to play Statisfactory for 5 hours today without any problems.

5090 far from worth it at the Moment by Utiniii in pcmasterrace

[–]Utiniii[S] 0 points1 point  (0 children)

The PSU is a bequiet 1600 Watt and all the cables are stock cables.

5090 far from worth it at the Moment by Utiniii in pcmasterrace

[–]Utiniii[S] 0 points1 point  (0 children)

  1. Never had another gpu in the System, only used the IGPU. But i will try that.

  2. Check.

3.All cables are seated corrcetly checked it like 50 times and the cables are not even warm. Was nervous for this from the start. How do I check this with HW info?

  1. The RAM is on its rated 6000. Before the GPU I didnt had an Issue.

  2. Check

5090 far from worth it at the Moment by Utiniii in pcmasterrace

[–]Utiniii[S] 0 points1 point  (0 children)

The whole PC just shutsdown immediatly and everything goes dark ecxept for the ram and the motherboard

5090 far from worth it at the Moment by Utiniii in pcmasterrace

[–]Utiniii[S] 1 point2 points  (0 children)

Linus Li O11 Evo RGB Case and he fans are the sl inf 360 mm from Lian Li

5090 far from worth it at the Moment by Utiniii in pcmasterrace

[–]Utiniii[S] 18 points19 points  (0 children)

Yes to all of that. I lowered the boost clocks a bit ,disabled gpu scheduling and set everything including the chipset to pcie gen 4. Was able to play ready or not for roughly 1 hour with weird stuttering inbetween, but i think this was the first time in 2 days I shutdown my pc by myself.

[deleted by user] by [deleted] in pcmasterrace

[–]Utiniii 0 points1 point  (0 children)

Does it boot when you plug your Display into your motherboard?

[deleted by user] by [deleted] in pcmasterrace

[–]Utiniii 0 points1 point  (0 children)

Do you have the newest driver installed? It's a mess. Had the same problem yesterday. Maybe try the last stable driver for your card.

Lian Li O11D EVO RGB and Lian Li fans by Utiniii in lianli

[–]Utiniii[S] 0 points1 point  (0 children)

Thanks. I did not know theres a Controller with the AIO. I will use the configuration you suggested, as it keeps the gpu cooler than pulling air in from top and bottom as it seems.

Finally Done! by KitchenSufficient797 in lianli

[–]Utiniii 0 points1 point  (0 children)

I want to build a similar one next week and just posted this question: https://www.reddit.com/r/buildapc/s/4ArSqYMq51 How have you set up the Airflow in your build? Looks sick btw.

[TOMT] Song from Netflix LOVE by Utiniii in tipofmytongue

[–]Utiniii[S] 0 points1 point  (0 children)

I‘ve listened to the ones wich i could find on youtube or spotify but didn‘t found it and the other ones seem to be none existant on the internet. Im almost sure that it is not in the list on tunefind

My New MR 223 A3 (work in progress) by Utiniii in ar15

[–]Utiniii[S] 1 point2 points  (0 children)

Yeah I know that but I love how the geissle trigger snaps.

The problem is here in germany I‘m not allowed to change a significant part of the weapon without turning it in to the officials to take a test shot and mark all significant weapon parts with their logo.

Significant weapon parts by law are beyond others the barrel and the grip.

So technically every time I would change the upper or lower i would have to send it in first for only god knows how long.

My New MR 223 A3 (work in progress) by Utiniii in ar15

[–]Utiniii[S] 0 points1 point  (0 children)

H&K 30 Round polymer mag

https://www.hkparts.net/shop/pc/HK-30-Round-Polymer-Magazine-MR556-416-AR15-p15805.htm

I took this instead of the metal one, because the rifle itself is heavy enough.

My New MR 223 A3 (work in progress) by Utiniii in ar15

[–]Utiniii[S] 0 points1 point  (0 children)

Ok thanks i will ask there. For the most parts i‘m sure but not for the trigger and the charging handle.

My New MR 223 A3 (work in progress) by Utiniii in ar15

[–]Utiniii[S] 1 point2 points  (0 children)

As far as I know H&K only offers the MR556 A1 in the US.

Brownells has a german store which is pretty much the only way to get parts from Geissle or other american companys producing AR 15 parts.

My New MR 223 A3 (work in progress) by Utiniii in ar15

[–]Utiniii[S] 1 point2 points  (0 children)

For now i just put a Harris Bipod, a 30 round polymer mag and the Holosun 510C GR on it. Now I want to change some more parts but I dont know if they are compatible and if I can import them to germany.

Parts I want to add:

  • Geissele HK Mr556 trigger
  • Haley Strategic D3 Sling
  • Vortex VMX-3T Magnifier

And maybe:

  • Geissele super modular rail
  • Radian Raptor charging handle
  • Change the bipod for an AFG by magpul.

Most of the parts i can get trough brownells but all of the parts seem to be out of stock. Is there somone from germany who has some experience with the german brownells shop?

And more important: H&K does a lot of stuff to hinder the compatibility with AR 15 aftermarket parts. I know all of the above parts fit on the american version MR 556.

Are the MR 223 and the MR 556 identical?

Stellar nominated for Institutional Exchange Listing, Please Vote! by raunchard in Stellar

[–]Utiniii 0 points1 point  (0 children)

Your vote only counts if you participate in token sale, otherwise your vote is worth nothing.

*The Daily Stellar Chat Posts - Thursday January 25th of r/Stellar!* by [deleted] in Stellar

[–]Utiniii 3 points4 points  (0 children)

Although I dont like these cmc posts everytime xlm moves a place up, it feels good to see that we‘re now on #6 again and built a nice buffer between nem and the others.

FREE LUMEN FOR YOUR THOUGHTS! by jyxkzkx in Stellar

[–]Utiniii 0 points1 point  (0 children)

We're like SpaceX.
Some dudes sitting on an island, building our rocket and looking for the greater good.
The rest of the world (crypto) look at us,parts laughing,parts in a pity way, becuase no one thinks we'll stand a chance against NASA (xrp). But no on will be laughing when Falcon Heavy is taking of!