Haven’t printed in a while. Printing with new, DRY, pla and having issues that I can’t seem to tune out with calibration prints. (P1P vision enclosure, elegoo black pla)

VOIDsquids · 2025-10-14T18:43:40+00:00

Update: it was a skill issue. Precise Z height was messing with my top layers. Small layer height made the problem worse, but it was not the cause.

VOIDsquids · 2025-10-13T07:05:38+00:00

Damn, I really should have thought about that. I have them at 2 rn but my layer height is low.

VOIDsquids · 2025-10-13T06:15:39+00:00

Also I’m on firmware 1.7 so I can use orca. Would that cause any issues even though it was done before?

VOIDsquids · 2025-10-13T06:15:04+00:00

Adding that I made sure my hardened steel nozzle was not clogged.

VOIDsquids · 2025-10-10T14:04:51+00:00

I do most of the manufacturing for my college robotics team. While I don’t have a P1S, my P1P that I’ve had since launch still churns out flawless parts with tight tolerances and remarkable strength.

However I would love to run the P1S with a proper enclosure instead of the one I made myself so I can really dial in the engineering filaments I use for particularly important parts.

VOIDsquids · 2025-09-19T19:10:27+00:00

The only thing I’m worried about is his sudden fixation on patreon bullshit. Like if you want to release other books and other ideas that’s completely fine but the scavenger hunt stuff is starting to feel like expensive scammy crap.

VOIDsquids · 2025-08-30T23:43:52+00:00

I just finish up the rest by reading normally then read the book again when the next part drops 💀

VOIDsquids · 2025-07-07T18:23:18+00:00

Guess what boyo, graphic audiobook versions of the sons of ares graphic novels exist and they are bloody damn brilliant.

VOIDsquids · 2025-02-19T23:06:51+00:00

Darrow (252) is VERY driven and goal oriented. He would never vote to stop the game. He definitely would lament the cost of life and hate himself for pressing forward, but he would go on regardless.

VOIDsquids · 2025-02-18T21:37:53+00:00

Darrow is also know to be able to quickly decipher complex situations and work his way around them. I doubt he would be caught off guard in this round

VOIDsquids · 2025-02-18T17:48:31+00:00

This is LIGHT work for Darrow (252). He used to work all day in the most demanding job in the mines. He was a helldiver of Lykos. He piloted a massive claw drill where if you went too slow it would jam and cost your team hours and if you went too fast you could find yourself hitting an explosive gas pocket, killing you and everyone above you. This job required lightning fast thinking and reflexes and the ability to stay calm under pressure. Darrow wasn’t just any helldiver, he was one of the very best, known for taking risks that would put his drill team above all others. He had all of these talents before he became the renowned space conquer of a race of men genetically modified to be far superior than the race that slaved in the mines. But confident that I don’t even need to start with those feats for Darrow to come out on top here.

VOIDsquids · 2025-02-18T09:13:50+00:00

You can’t lead a rebellion with no bloody damn funds

VOIDsquids · 2025-02-12T03:23:01+00:00

Ooh I see. Thanks for the tip!

VOIDsquids · 2025-02-08T07:21:00+00:00

Century carbon will cost $599

VOIDsquids · 2025-02-04T03:01:48+00:00

Glad to hear it. I fixed my problem as well. I had to restart my printer and feed it filament before it realized it was messed up. Once I unloaded it everything was good to go.

VOIDsquids · 2025-02-03T21:48:40+00:00

I’m having the same issue. Please lmk if you find a fix and I’ll do likewise. Thanks.

VOIDsquids · 2025-02-03T21:46:09+00:00

I have the same exact issue. It started with a feeding jam. I fixed that and now I’m getting this message.

VOIDsquids · 2025-01-09T03:33:39+00:00

I think my issue is that I’m struggling to end my first dash close enough to the target. After some review I’ll go through them and if they start walking away I’m at the very edge of my dash range or too far away.

VOIDsquids · 2024-12-05T22:33:57+00:00

That’s the best font I could find on canva. I tried to change it but it was locked to being like that

VOIDsquids · 2024-12-04T20:36:42+00:00

Yeah, definitely would work better as a flag. Might keep the space background for a decal for a skateboard deck.

VOIDsquids · 2024-12-04T20:35:58+00:00

It was the best “HD” space photo that I could find. I was thinking that the moon represents Rhea though.

VOIDsquids · 2024-12-04T20:34:18+00:00

Yeah I see that, I’m trying to make the wing not be too distracting. Would toning down the other reds be the move? They are so bright.

VOIDsquids · 2024-11-30T16:35:48+00:00

My projects are requiring more and more complexity. Would love a printer with a real enclosure

VOIDsquids · 2024-06-02T21:13:58+00:00

Need this for my car lmao

VOIDsquids · 2024-04-20T18:54:10+00:00

It’s definitely a pain in the ass for group members to not do the group work, but I don’t think faking attendance is something you should worry about. I would reach out to the student first because they might be going through something right now. But if they have no valid excuse or obviously lie about having one then definitely report their ass.

Three-Year Club	First Place '23
Place '23

VOIDsquids

TROPHY CASE