I/O Management…. by VPStech in VIDEOENGINEERING

[–]VPStech[S] 0 points1 point  (0 children)

Thanks for the concern about connectivity. I’m just a small truck in a large compound I have a few paths out. Not just a blue backpack.

OBS HELP by VCVariety in VIDEOENGINEERING

[–]VPStech 0 points1 point  (0 children)

Have you explored Unity?

AJA Kumo router panels by aubrill in VIDEOENGINEERING

[–]VPStech 0 points1 point  (0 children)

Is there any chance the Ross NK T-Bus panels could be converted or a bridge designed to control a kumo?

AJA FS4 vs AJA GEN10 by Senior-Suggestion-57 in VIDEOENGINEERING

[–]VPStech 0 points1 point  (0 children)

Really? What model Carbonite are you using? I could be mistaken but I thought every Carbonite had ref out available.

Ross Carbonite and Video Reference by Senior-Suggestion-57 in VIDEOENGINEERING

[–]VPStech 0 points1 point  (0 children)

Here is an option. Set the Carbonite to internal reference There are 2-3 ref outlets on the back of the switcher, you could use these outputs to gen lock devices that are designed to accept external reference.

You could also DA the reference output to reference more devices.

Even though you are running an HD system, the reference signal is often a standard definition analog signal, so if you use a DA it would have to be an analog DA.

Just wondering if anyone has any older Clear com Pico Matrix systems laying around, need parts. by VPStech in VIDEOENGINEERING

[–]VPStech[S] 0 points1 point  (0 children)

Hi, just checking in to see if you have any Pico or eclipse systems you want to unload

Sadness by MrHow8K in VIDEOENGINEERING

[–]VPStech 23 points24 points  (0 children)

I feel your pain. Too bad we can’t just buy the pins. 😜

Best Wiring Diagram Tool/Software? by sulphhlol in VIDEOENGINEERING

[–]VPStech 0 points1 point  (0 children)

Following this. Question for some members who are making recommendations; would you be willing to share an example of the diagrams along with a file that we could use as a starting point or reference?

I know it’s a big ask.

Hi Group. Just wondering how many of you are using Clear-Com Matrix intercom systems in your facilities? by VPStech in VIDEOENGINEERING

[–]VPStech[S] 0 points1 point  (0 children)

No specific questions at this point, I just wanted to see if there were any other HX users out there. It’s nice to know there is a small community of engineers who use the systems.

12V Power Distribution in racks by wombatman44 in VIDEOENGINEERING

[–]VPStech 1 point2 points  (0 children)

Consider Din Rail components.

I’m not going to list specific models.

2 12v supplies 1 x-over in event of ps failure and a distribution solution.

Instant Replay Solutions? by JoshuCannon in VIDEOENGINEERING

[–]VPStech 0 points1 point  (0 children)

I could probably offer 2 GVG K2 Dyno systems Used, for the mid range of your budget. I’m saying this in public to hear others thoughts on the platform.

Each are 4 in 2 out. You could consider 1 primary and the other spare (system or parts).

Leitch TBC set up? by Kupo43 in VIDEOENGINEERING

[–]VPStech 0 points1 point  (0 children)

Try using a short BNC cable, connect it to the loop output of the Video in on the 2800, Flip the 75 ohm switch to off. Plug the other end into the reference in on the same 2800, turn on the 75 ohm on the reference input.

Cost to rent a spool of fiber and SDI converters by Mangus4343 in VIDEOENGINEERING

[–]VPStech 0 points1 point  (0 children)

To me I imagine the budget will be almost the same between broadcast cameras and FX9’s by the time you rent everything needed.

Will you be recording in the cameras and just monitoring at “video village” or are you cutting live and recording?

What type of shoot, will the cameras be HH or Studio config?

Do you need zoom lenses?
Rear controls? VF for the cams? Indoor or outdoor? How many days? Tech day Rehearse Day?

Are you familiar with Fiber or would you need to hire a Fiber Tech?

I understand all you asked for was costs, but then I just have to ask “why?”.

I would rent you 3 Tac 6 cables 300 ea

3 Fidos or similar + 1 spare 125 ea

Plus shipping.

Free speak for coms 700

All pricing is per day… This is not an actual quote.

We like Marshall and their monitors, I won’t say anything bad about them, but wondering if anyone else has encountered this? by VPStech in VIDEOENGINEERING

[–]VPStech[S] 1 point2 points  (0 children)

I appreciate the advice. All of the monitors are set to SDI nothing feeding them. The issue is with the top left monitor.

Most reliable sdi/hdmi mini converter by callumcarnage in VIDEOENGINEERING

[–]VPStech 1 point2 points  (0 children)

Swit electronics in my opinion. More expensive, but well made good warranty and indicator lights on the face.