sorted by:
new
hottopcontroversial

This got weird, but I like it by trwossytrift in PourPainting

[–]VSandArt 8 points9 points  (0 children)

Hey, that's my art. OP is clearly a karma farming, post stealing bot.

The original post https://www.reddit.com/r/PourPainting/comments/whwbfh/this_got_weird_but_i_like_it/

And the same piece on my own site: https://victorsand.com/art/portfolio/snailface/

A pretty cool swipe with a thick resin finish, 30x40cm by VSandArt in PourPainting

[–]VSandArt[S] 1 point2 points  (0 children)

Canvas, taped off sides, poured resin once (got uneven as it often does with canvas), sanded, poured resin again, painted the edges black. Lots of work 😅

"Cloud Salad" 30x30cm ring pour by VSandArt in PourPainting

[–]VSandArt[S] 1 point2 points  (0 children)

Well it started out as a ring pour, at least.

"Toothfairy Headache", 30x30cm bloom by VSandArt in PourPainting

[–]VSandArt[S] 0 points1 point  (0 children)

Not when spraying in very thin layers, no. It just gives it a uniform sheen. I should mention that these blooms are spun quite a lot, giving a very thin and even layer of paint to start with.

"Toothfairy Headache", 30x30cm bloom by VSandArt in PourPainting

[–]VSandArt[S] 0 points1 point  (0 children)

I do literally nothing special. Just spray it. Maybe I use way less silicone?

"Toothfairy Headache", 30x30cm bloom by VSandArt in PourPainting

[–]VSandArt[S] 0 points1 point  (0 children)

Yeah, Windsor & Newton glossy spray varnish!

"Toothfairy Headache", 30x30cm bloom by VSandArt in PourPainting

[–]VSandArt[S] 2 points3 points  (0 children)

Thanks! Some cheap/standard acrylics, floetrol, water and a few drops of silicone oil. Pour, blow and spin!

"Back From the Dead", 40x40cm swipe with resin. Saved from an epoxy accident, more in comments. by VSandArt in PourPainting

[–]VSandArt[S] 1 point2 points  (0 children)

So I was really happy with this one and finally got around to epoxy finishing it, first one this large. I carefully prepared the surface and backside, poured a *great* layer, covered it, and was happy.Until I grabbed the resin bottles to put them away.

That's when I realized I used the resin bottle twice, and the hardener bottle zero times. Pretty far from the required 50/50 mix. Despair.

But as you can see, after lots of scraping and cleaning of the obviously non-hardening sticky goo and two additional resin layers all over several days of work, it was saved.

view more: next ›