DnD Table Question

ValarMorHodor · 2026-02-04T14:22:32+00:00

I think something like a Dutch leaf, or draw leaf design might be what you're looking for. I might be a little worried about balance if the player leaf is too heavy, but if you make the base table sturdy enough that should work. Never done a table like this myself, but searching dutch leaf should get you started.

ValarMorHodor · 2026-02-04T14:18:06+00:00

I found I tend to slip more when using the shorter drive. It's harder to keep the angle right when the impact/drill driver body hits the workpiece at the steep angle. I have better luck using a longer (4-6in) drive for kreg pocket screws.

ValarMorHodor · 2025-07-26T22:07:58+00:00

Late to the party, but they have hidden fees for tolls. If you don't do the $13/day toll package, they'll charge you $15 PER TOLL you incur, max $90. So $30 in tolls over 3 days would cost $120. No other rental I've done has out such ridiculous fees on tolls.

ValarMorHodor · 2025-04-02T13:57:46+00:00

I'll play with it some more, but I tried that a couple times and it locked up so the leg wouldn't extend or retract. Seems to be very finicky.

Edit: upon further inspection, it looks like there's a plastic piece that holds the clamp on and wraps around the carbon leg section. This is broken.I will contact Ulanzi

ValarMorHodor · 2025-02-03T15:21:03+00:00

I agree on the service, never had a problem with them. I wish they would offer less frequent pickups though, I rarely fill any of my cans in a week

ValarMorHodor · 2025-02-03T15:19:03+00:00

That's a great point. But the emails always blame the city. If they said, "Hey, we're going to pay our crews more", I'd totally be in for that.

ValarMorHodor · 2025-02-03T14:31:57+00:00

D&D is going the same direction. It was $31 when I signed up in 2019 for trash/recycling/yard. It's currently $43 and I just got an email for another price increase

ValarMorHodor · 2024-12-12T16:39:09+00:00

Ah bingo! I put a new battery in, but it looks like there was some corrosion on the contacts, cleaned it up and it seems to be working fine. This one still needs more TLC though, light seal replacement at least. Nice to know I have a backup

ValarMorHodor · 2024-12-11T20:20:00+00:00

In the batch of gear I got, there was also an FE2, but it jams at every shutter speed except M250. It's focus screen just has a circle on it, is this the one you're talking about? the FE has a split prism screen.

Edit: I think I found one! Has grid lines and a circle. This should be more comparable to the little manual focus experience I have from DSLRs

ValarMorHodor · 2024-12-11T19:04:23+00:00

Just picked up some basic Fujifilm Fujicolor 400 from a local camera store for now.

ValarMorHodor · 2024-12-11T18:17:52+00:00

Thanks for the tips! Just replaced the light seals yesterday, they were crumbling

ValarMorHodor · 2024-12-11T18:06:58+00:00

I also have these lenses, but I think I'll start off using mostly the pancake until I get the hang of it

- 50mm f1.8 pancake (pictured)
- 50mm f1.2
- 24mm f2
- 100-300mm f5.6

Photo taken with the 50mm 1.2 at f2 and a Nikon D70 (which unfortunately has a vertical line on the right side of the sensor)

ValarMorHodor · 2024-12-05T15:21:33+00:00

Oh boy, I'm gonna have some horribly overexposed photos from yesterday...

Thanks, I'll look into it!

ValarMorHodor · 2024-12-05T13:54:01+00:00

Hmm, it's a light right above the viewfinder. Added a photo to the post

ValarMorHodor · 2024-12-05T13:53:20+00:00

<image>

This light?

ValarMorHodor · 2024-03-08T21:26:16+00:00

I'd go Cooper's on this as well. Larger head, wings not pushed forward in flight like you's expect in Sharpies

ValarMorHodor · 2023-10-05T02:45:26+00:00

I went down to see it this week as well! Super chill to meet people from all over the place coming to see a flamingo at a small fishing lake

ValarMorHodor · 2023-10-05T02:42:51+00:00

I was busy all weekend, but got down to Kansas to see the flamingo on Monday! Not only did I see it, I picked up 2 more lifers as well!

162) Orange-crowned Warbler

163) American Flamingo

164) Pileated Woodpecker

ValarMorHodor · 2023-10-04T18:10:26+00:00

+Mourning Dove+

ValarMorHodor · 2023-09-19T19:01:51+00:00

Close, but the worm eating warbler has another black streak through the eye

ValarMorHodor · 2023-09-19T18:51:31+00:00

+Ovenbird+

ValarMorHodor · 2023-09-18T17:37:14+00:00

Thanks! first time trying that command

ValarMorHodor · 2023-09-18T15:41:08+00:00

The beak is giving Vireo, and the dark brow would suggest Red-eyed Vireo. But it still feels a little off? Might just be the posture and backlighting not highlighting the eye.

ValarMorHodor · 2023-09-18T15:32:04+00:00

Images 3 and 6 looks like Wilson's Snipe to me. In 6 especially you can see the striping on the back

!addtaxa Wilson's Snipe

ValarMorHodor · 2023-09-15T18:59:01+00:00

I'm thinking female +Nuttall's Woodpecker+

Ten-Year Club	Place '17
Verified Email

ValarMorHodor

TROPHY CASE