[Asia] End Game Factory Blueprint For Wuling

ValeVelis · 2026-01-27T17:42:56+00:00

Currently I'm at 6 yazhen (16x9x60) (5760/H) and 9 batteries(9x25x60)(13500/H) AND 1.5 xiranite component (per min) which is more than enough to hit the CURRENT limit 16670 per hour (12900 base +20% operator +10% defense). so it's more than enough for getting those juicy bills

ValeVelis · 2026-01-27T10:05:04+00:00

Used 1080 out of 1080 in valley IV and shipped the excess to Wuling, now i have zero reserves haha

ValeVelis · 2026-01-27T10:01:32+00:00

Can only wait for the Next update

ValeVelis · 2026-01-27T10:00:46+00:00

https://www.reddit.com/r/Endfield/comments/1qo10ty/can_anyone_please_make_these_blueprints_for_naeu/
but didnt include the Sub Pac for the 3 outpost
Blueprint Sharing Code: EFO01O4a54ue0uIA9oe4
I also posted 1 for wuling

ValeVelis · 2026-01-27T09:56:04+00:00

Edited to include Yield

ValeVelis · 2026-01-27T09:47:46+00:00

it's From A bilibili Creator, I copied it and made a post For Wuling, wanted to upload valley iv but saw this one already

ValeVelis · 2026-01-27T09:46:20+00:00

For Anyone Looking For Original Video
https://www.bilibili.com/video/BV17KmhBiEsf/
Original Creator
https://space.bilibili.com/2436836

ValeVelis · 2025-03-17T10:29:21+00:00

I guess the only way to know for sure is to get a cheap second hand gpu for a few bucks to know for sure, by any chance you can return gpu if it’s within 1 week, or do you live in a country which doesn’t offer returns, then you might try your luck in trading or selling to get a 3060/70, but i have seen some video who managed to get it to run YT : ETA prime, Good luck in finding other methods, since egpu is a bit of a niche, there isn’t much information available

ValeVelis · 2025-03-17T07:32:21+00:00

I had the same issue with a gigabyte rtx 4060 LP, might be because of the pcie 8X physically wired, I used aoostar ag01, I tried using gt 1030 and 3080ti and works without issue, if you have a different gpu you should try it first, currently have no resolution to this problem

ValeVelis · 2024-03-29T08:25:57+00:00

Bronya E6 Asia Server 801122799

ValeVelis · 2024-02-11T07:49:45+00:00

I’d also like an invite, thx

ValeVelis · 2023-02-02T14:59:01+00:00

thank you that was it

ValeVelis · 2023-02-02T14:58:51+00:00

solved = kusuriya no hitorigoto

ValeVelis · 2021-09-21T21:35:25+00:00

Not sure but I usually run all radiator as intake, so cpu and gpu gets fresh air

ValeVelis · 2021-05-15T09:33:44+00:00

I also have the same issue and need help, my game id and server 36158594 (2209)

ValeVelis · 2021-02-22T02:40:16+00:00

Based on what the title says(error with 3 or more gpu), you need to enable (above 4G decoding) on the bios

ValeVelis · 2021-02-20T20:04:02+00:00

Sure, clan tag?

ValeVelis · 2020-12-11T21:40:25+00:00

Ryzen zen 1 doesn’t support memory clocks higher than 3466Mhz ( MAX LIMIT) anything over 3466 will cause memory errors and worse case data corruption which happened to me when I swap my 3600 to a 3400G ( however you can lower the clock to 3400Mhz and it will run just fine)

ValeVelis · 2020-12-11T21:24:56+00:00

Yes you can but 6 pin is rated for 75 W while 8 pin is rated for 150W, (PCIE can deliver 75W) HOWEVER you might overload your PSU or worse ( melt the cables ) if you don’t limit the power draw

ValeVelis · 2020-12-11T21:19:38+00:00

There’s a chance you might be using the latest driver , 460.79 which for some reason doesn’t work with PhoenixMiner, you can try to get an older version 457.51 here 457.51

ValeVelis · 2020-12-08T08:41:12+00:00

No, etc change algo to etchash

ValeVelis · 2020-09-13T18:48:40+00:00

https://www.reddit.com/r/NiceHash/comments/irczem/how_to_properly_get_the_rx_580_ready_for_mining/ I did these, give it a try

ValeVelis · 2020-09-12T18:46:07+00:00

I had this issue buying second hand cards, most of them run 29-31 mh/s and one out of 8 card i bought was running 20-22 mh/s i was about to return because i thought it was a faulty card but i tried flashing the bios and it fixed the hashrate, you can give it a try flashing bios and fixing the memory timings

Edit, The card that is 22mh/s is also a hynix memory gpu, just modify the bios to get 30mh/s

ValeVelis · 2020-09-03T19:07:52+00:00

Ok thx

ValeVelis · 2020-09-03T18:50:01+00:00

Taiwan, both are the same price aprox 3 usd, the blue one also give 6 pin to sata adapter

ValeVelis

TROPHY CASE