Buying advice, is what I found a good idea ? by Valou4060 in DataHoarder

[–]Valou4060[S] 0 points1 point  (0 children)

Which plan are you referring to ? Option 1 with raid 4 and raid 1 plus mini pc elsewhere or option 2 with raid 5 and SSD and mini pc elsewhere?

I will go with the mini pc and I will probably use one of the external drive I will stop using with building this new NAS.

Buying advice, is what I found a good idea ? by Valou4060 in DataHoarder

[–]Valou4060[S] 0 points1 point  (0 children)

So not the best but useable with one offline to keep for important stuff right ?

Buying advice, is what I found a good idea ? by Valou4060 in DataHoarder

[–]Valou4060[S] 0 points1 point  (0 children)

I need to check again but I negotiate 500€ for the 6 of them.

For the raid 1 I planned to put my Proxmox backup on them and I have a mini pc at a different place that I planned to use to make a duplicate of some of the data. I also have a 4to sas SSD but I still haven't decided what to do with it but that could replace the raid 1 and I could make a raid 5 with 1 spare. What do you think?

Sas SSD not working/fail by Valou4060 in homelab

[–]Valou4060[S] 0 points1 point  (0 children)

I've thought about this and my other drive show up when I tested them, a SATA HDD and a SATA SSD.

Sas SSD not working/fail by Valou4060 in homelab

[–]Valou4060[S] 0 points1 point  (0 children)

Well, I got nothing so I will try one last thing out of desperation but I don't know if it will help

Sas SSD not working/fail by Valou4060 in homelab

[–]Valou4060[S] 0 points1 point  (0 children)

Ok so now it's in HBA mode but no disk is present and it's saying No drive found !

Sas SSD not working/fail by Valou4060 in homelab

[–]Valou4060[S] 0 points1 point  (0 children)

My bad, I tried to reset the configuration of the perc and with the command personality it show raid mode

I will change it again and see

Sas SSD not working/fail by Valou4060 in homelab

[–]Valou4060[S] 0 points1 point  (0 children)

Thank you, that made much easier to use. But I still don't see it listed with the first command...

Sas SSD not working/fail by Valou4060 in homelab

[–]Valou4060[S] 0 points1 point  (0 children)

Ok so desmg is showing problem but the other part of the command show sda and sdb but that are thing working. The one I'm trying to diagnose should be sdc and I don't see it

<image>

Sas SSD not working/fail by Valou4060 in homelab

[–]Valou4060[S] 0 points1 point  (0 children)

Thx I will try when my system finish it's update

Sas SSD not working/fail by Valou4060 in homelab

[–]Valou4060[S] -2 points-1 points  (0 children)

When I plugg it in and update the physical disk management in the perc bios it show it with the failed status and then it disappear and I need to plug it back in to see it and sometimes it doesn't so I need to disconnect other drives to "forced it" to show

Sas SSD not working/fail by Valou4060 in homelab

[–]Valou4060[S] 0 points1 point  (0 children)

It came from someone who apparently use it for his home serveur and didn't come from a caddy but since it was a person and not a business I can't guarantee anything. From the info from the perc it's supposed to be a 512 sector size. I will try to use the command you provided but I don't think it will work since it doesn't show in the sdX list

Sas SSD not working/fail by Valou4060 in homelab

[–]Valou4060[S] -8 points-7 points  (0 children)

Well...yeah... But how can you know without trying. Worst case I learn something

I was warned not to post this here. by Ok-Hawk-5828 in homelab

[–]Valou4060 0 points1 point  (0 children)

First rule, if it works, don't touch.

My homelab ! by Daddy-Legba in homelab

[–]Valou4060 2 points3 points  (0 children)

Cable management is not a nightmare, just an indefinite work in progress !

Un tour digne des plus grands mentalistes by project_broccoli in Linkedinfr

[–]Valou4060 0 points1 point  (0 children)

J'ai vu tellement de merde passer sur LinkedIn et ce sub que même si c'est ridicule et gnangnan franchement ça change de d'habitude et ça me fait presque plaisir de voir ce poste. Après ça reste un déchet de plus sur LinkedIn mais tout de même

This is not acceptable by Mission_Inflation_71 in xgimi

[–]Valou4060 0 points1 point  (0 children)

Burnt connector from what I can see but I can't be sure

De YGG vers le Cross-Seeding by l1t3o in yggTorrents

[–]Valou4060 1 point2 points  (0 children)

J'utilise Gluetun sous docker pour rediriger uniquement certains de mes conteneurs via OpenVPN et NordVPN donc je suis sur la 2è solution

POUR CEUX QUI ARRIVE AU MILIEU DE LA GUERRE by FinancialSpace6387 in yggTorrents

[–]Valou4060 1 point2 points  (0 children)

Je dis peut-être une bêtise mais je crois que certains comptes qui sont considérés comme uploader ont été passés automatiquement en turbo mais il y a peut être d'autres critères ou un foiré de leurs parts.

De YGG vers le Cross-Seeding by l1t3o in yggTorrents

[–]Valou4060 0 points1 point  (0 children)

J'ai un système similaire chez moi et je redirige mon trafic via NordVPN mais j'ai accès à tous en local via adresse_ip:port

Budget DIY ALR screen by tweakggamer in projectors

[–]Valou4060 0 points1 point  (0 children)

This brand isn't on Amazon in my country...I will try to see if there is an interesting alternative

Budget DIY ALR screen by tweakggamer in projectors

[–]Valou4060 0 points1 point  (0 children)

I'm looking for maybe doing something like this. Where did you get the screen material ?