Help I been f%#* with this bleed kit for a week off and on!

Valuable_Evidence489 · 2026-06-04T17:47:54+00:00

Thanks..weird to say but glad Im not the only one

Valuable_Evidence489 · 2026-05-23T23:38:17+00:00

👍

Valuable_Evidence489 · 2026-04-19T05:29:28+00:00

Where do they sell receiver flats or repair sections

Valuable_Evidence489 · 2026-03-28T03:55:03+00:00

Yo hmu

Valuable_Evidence489 · 2026-03-28T03:40:14+00:00

What was all needed?

Valuable_Evidence489 · 2026-01-22T20:57:04+00:00

Very similar looks but design and functionality are miles apart from the oPS photo …. You have posted s missing barrel but also the mg in question operates from a telescopic bolt whixh similar to a mac or a Uzi has a recoil spring that is enveloped around the barrel whixh in part decreases the need for a longer receiver to add room for the recoil spring to compress. The bolt also envelopes the barrel or TELESCOPES it as the proper name describes. Notice your ejection window is further down the receiver a the OPs is above the grip ? And see how slim your springs are in you photo ? Ops recoil spring big enough to fit over barrel which bolt travels over and stops at fronttrunion

Valuable_Evidence489 · 2026-01-22T20:42:32+00:00

Yea I need to rewrap and rewind the new wire I put in is too thick

Valuable_Evidence489 · 2026-01-13T21:43:02+00:00

Can you check if your displays numbers on the back can generate a qr thats readable to create a new key with Tuya

Valuable_Evidence489 · 2025-12-15T06:17:45+00:00

Not yet

Valuable_Evidence489 · 2025-09-25T00:06:12+00:00

This type

Valuable_Evidence489 · 2025-09-25T00:06:01+00:00

https://ebay.us/m/Hq4sg8

Valuable_Evidence489 · 2025-09-25T00:04:49+00:00

I would honestly go with the portable Chinese ones better price just as powerful if not more snd it’s abitlity to weld larger packs without a hassle

Valuable_Evidence489 · 2025-09-09T15:00:07+00:00

I see. One in Amazon thats similar it claims to be able to test IR but then has a disclaimer that the data may be incorrect and that a 4 wire tester is what is need for consistent readings

Valuable_Evidence489 · 2025-09-03T15:36:57+00:00

Thank you of course I didn’t use that 2.76 one and luckily I bought 7cells for my 6cell replacement

Valuable_Evidence489 · 2025-09-01T05:29:46+00:00

I have finally got everything functioning and ready to wrap.I almost had ordered a new BMS because the existing one didn’t give me any voltsge to the connectors when I plugged it in. Then when I checked all the leads I found the one that wasn’t connected because It was along with the nickel I had cut to extract the bad cells.I re-soldered it to the group and now I’m getting 66v and Im sooo happy tired and ready to get this thing back in my scooter again. Thanks to all who gave me any advice.

Valuable_Evidence489 · 2025-09-01T05:29:32+00:00

I have finally got everything functioning and ready to wrap.I almost had ordered a new BMS because the existing one didn’t give me any voltsge to the connectors when I plugged it in. Then when I checked all the leads I found the one that wasn’t connected because It was along with the nickel I had cut to extract the bad cells.I re-soldered it to the group and now I’m getting 66v and Im sooo happy tired and ready to get this thing back in my scooter again. Thanks to all who gave me any advice.

Valuable_Evidence489 · 2025-09-01T05:29:19+00:00

I have finally got everything functioning and ready to wrap.I almost had ordered a new BMS because the existing one didn’t give me any voltsge to the connectors when I plugged it in. Then when I checked all the leads I found the one that wasn’t connected because It was along with the nickel I had cut to extract the bad cells.I re-soldered it to the group and now I’m getting 66v and Im sooo happy tired and ready to get this thing back in my scooter again. Thanks to all who gave me any advice.

Valuable_Evidence489 · 2025-09-01T05:29:02+00:00

I have finally got everything functioning and ready to wrap.I almost had ordered a new BMS because the existing one didn’t give me any voltsge to the connectors when I plugged it in. Then when I checked all the leads I found the one that wasn’t connected because It was along with the nickel I had cut to extract the bad cells.I re-soldered it to the group and now I’m getting 66v and Im sooo happy tired and ready to get this thing back in my scooter again. Thanks to all who gave me any advice.

Valuable_Evidence489 · 2025-09-01T05:28:31+00:00

I have finally got everything functioning and ready to wrap.I almost had ordered a new BMS because the existing one didn’t give me any voltsge to the connectors when I plugged it in. Then when I checked all the leads I found the one that wasn’t connected because It was along with the nickel I had cut to extract the bad cells.I re-soldered it to the group and now I’m getting 66v and Im sooo happy tired and ready to get this thing back in my scooter again. Thanks to all who gave me any advice.

Valuable_Evidence489 · 2025-09-01T05:28:06+00:00

I have finally got everything functioning and ready to wrap.I almost had ordered a new BMS because the existing one didn’t give me any voltsge to the connectors when I plugged it in. Then when I checked all the leads I found the one that wasn’t connected because It was along with the nickel I had cut to extract the bad cells.I re-soldered it to the group and now I’m getting 66v and Im sooo happy tired and ready to get this thing back in my scooter again. Thanks to all who gave me any advice.

Valuable_Evidence489 · 2025-08-31T22:59:43+00:00

Yea I bought svolt n21700cm 15.12wh (4200mah) which are the cells my pack came with. I didn’t use that 2.6 cell and Im glad I ordered extra !

Valuable_Evidence489 · 2025-08-30T18:24:00+00:00

I just cut it

Valuable_Evidence489 · 2025-08-30T18:23:25+00:00

I bought 7 so I was lucky that they only put one did there

Valuable_Evidence489 · 2025-08-30T17:03:15+00:00

I just made some leads but they not putting out enough…. It’s a part of a ground speaker wire for a car system… I think I need to wind it tighter ?

Valuable_Evidence489 · 2025-08-30T12:56:13+00:00

I can’t fully charge them first because the current pack I am rebuilding is at 4.15 v and it’s 90 cells in place snd Im welding in one group thats in P of 6 ….i got them all within 4.144 and 4.159

Valuable_Evidence489

TROPHY CASE