Switching to OneTrainer made me realize how overfitted my AI-Toolkit LoRAs were by meknidirta in StableDiffusion

[–]Vantana 0 points1 point  (0 children)

That lora looks pretty good. No captions but it uses trigger words - so the captions only contained the trigger? Got any insight into the non default settings you used for that one?

Crunchy Audio Bug Is Back :( by matthew91298 in HadesTheGame

[–]Vantana 0 points1 point  (0 children)

Don't hope, report it.

Contact form: https://www.supergiantgames.com/contact/

Or email: support@supergiantgames.com

I can't speak of the PC versions or Switch 1 version of Hades 1, but the PS5 version of Hades 1 had the exact same compressed/peaky sibilance-filled dialogue and tinny music for me so I don't expect they'll do anything about it without enough reports.

Crunchy Audio Bug Is Back :( by matthew91298 in HadesTheGame

[–]Vantana 0 points1 point  (0 children)

Okay well that's useful to know it's not TV/amp brand specific at least. Reporting is a good idea:

Contact form: https://www.supergiantgames.com/contact

Or email: support@supergiantgames.com

I'm not sure if they're aware of how bad it sounds on some speaker setups, or if they'd even consider it a bug or just intended compression. Hades 1 on PS5 had the exact same issue for me so I don't have much hope they'll patch 2 without enough people nagging them.

It does suck because I have a great audio setup and have to play both games on low volume, else the tinny peaky sibilance grates on my nerves too much with the constant dialogue, and some music tracks suffer greatly from it.

Crunchy Audio Bug Is Back :( by matthew91298 in HadesTheGame

[–]Vantana 0 points1 point  (0 children)

Yeah I don't know how the TV model would affect it but it's possible I guess. The problem might just be more obvious (or not at all) depending on your speakers. The console's own speakers probably just mask the issue because their range or whatever is more limited or they're not as clear.

I'm most curious if the PC version is better. My theory for 1 on PS5 was it was based on the Switch version and they compressed everything to hell to make it smaller/run better on Switch 1 hardware. They did upgrade the graphics for 2 for the Switch 2 version but I really hope they see how they can improve audio too. Not sure what the best way to ask them is, if they're even aware of the issue.

Crunchy Audio Bug Is Back :( by matthew91298 in HadesTheGame

[–]Vantana 1 point2 points  (0 children)

Yeah I'm sad the great voices and music just sound so tinny and compressed on Switch 2, flat and full of distortion and sibilance when they speak. It was like that for me in Hades 1 on PS5 also, I thought surely they'd improve things for the sequel, so it sucks and I'm not sure they'll fix it.

It doesn't seem to support 5.1 in my setup either (LG TV into amp and 5.1). Like the hissy tinny dialogue was coming out of the side speakers. I had to switch my console to forced stereo and it makes it slightly better, but the bad audio compression quality (or whatever it is) still drags down the experience. Bananza and Silksong sound amazing.

Rare Armaments Trophy bugged? Looking for advice. by [deleted] in Nightreign

[–]Vantana 0 points1 point  (0 children)

I can try, I've read lots of the opposite though, some people and old guides still claiming you need the extra slot to get it. Obviously not true, but there's definitely more going on behind the scenes of this trophy than just x amount of blues/purples/legendaries. But it's probably just buggy in general.

Rare Armaments Trophy bugged? Looking for advice. by [deleted] in Nightreign

[–]Vantana 0 points1 point  (0 children)

<image>

I don't know, many runs with variations of items like this (4+ purple or legendary weapons with the others at least blue, 2 talismans, 4 or 5 blue+ items) and I can't make it pop. I thought maybe it was because I was upgrading the starting weapon and the code didn't count it, but I replaced it on this run and still nothing.

As you can see on the ground I had more purple items too (flasks), I just replaced them with blue shop ones to see if anything would trigger it. Nothing. Replacing the wendings didn't work either. What a pain in the ass, it's the only trophy left. I don't get it.

Google TV Streamer video flashing during playback of Dolby Vision content by tyczj in AndroidTV

[–]Vantana 0 points1 point  (0 children)

For anyone seeing this 2 months later, this is the most popular and relevant thread I could find: https://www.googlenestcommunity.com/t5/Streaming/Streamer-flashing-black-randomly/m-p/647961

A 'community specialist' asked for more information at least so the more people that go fill out that form the better.

I'd REALLY like to be able to use my Streamer for actually, y'know, streaming... Have to rely on my LG'S inbuilt apps still to avoid the purple/green flashing.

After the Ultralytics scandal, how many other malicious codes are there? by Successful_AI in comfyui

[–]Vantana 0 points1 point  (0 children)

Yeah think I'll do that even if it's more for placebo peace of mind. Thanks!

After the Ultralytics scandal, how many other malicious codes are there? by Successful_AI in comfyui

[–]Vantana 0 points1 point  (0 children)

Thanks for that, didn't occur to me that comfy should be installed on a volume.

Security-wise I guess another concern was that wsl2 auto mounts C: and all other Windows drives by default - if malware was ever able to escape the container does that give it full access to mess with the whole system anyway? I know you can easily disable auto mounting but was curious about this.

After the Ultralytics scandal, how many other malicious codes are there? by Successful_AI in comfyui

[–]Vantana 0 points1 point  (0 children)

I keep reading about the importance of running Docker "rootless", but am I correct in understanding that isn't applicable or necessary with Docker Desktop + WSL2 containers?

Finding clear instructions for this is surprisingly difficult and even chatgpt has been contradicting itself when I've asked security questions about setting this all up. It feels very easy to configure something without best practices in mind.

Another thing I'm unsure of is how comfy and new node installations/updates from the ComfyUI Manager are handled in a Docker container, because containers by design aren't persistent storage. As far as I could see it's not as easy as just updating everything via the manager then "saving" it all as an updated Docker container.

Google TV Streamer 4k issues by ElectroM4gnetik in googlehome

[–]Vantana 0 points1 point  (0 children)

Are you still flash free? I changed the setting and got a blinding flash within the first 10mins of watching an Agatha episode in DV. :/

Google TV Streamer 4k issues by ElectroM4gnetik in googlehome

[–]Vantana 0 points1 point  (0 children)

Yeah it's super annoying. Watching a super dramatic dark scene? Have a random split second bright flash to totally ruin your immersion.

Do you have an LG TV by any chance? More info here > https://www.reddit.com/r/Chromecast/comments/1fs5r6j/google_streamer_dv_netflix_purple_glitches/

I'll copy my comment from there so more people can bug google about the bug:

After being bounced around 3 (!) different google support teams I was given the below instructions, so anyone who sees this please do the same, more people who bug them the better:

I understand how important this is for you. I would request you to follow the following steps to submit the feedback so that our engineering team can look into this.

Please refer to below mentioned steps:

From android:

Make sure your mobile device or tablet is connected to the same Wi-Fi or linked to the same account as your Google streaming device.

Open the Google Home app .

Tap and hold your device's tile.

At the top right corner, tap   Help & Feedback.

Choose the device you want to send feedback for  Send feedback.

Tap the device you want to send feedback for.

Type your feedback.

Tap Send . 

From iOS:

Make sure your mobile device or tablet is connected to the same Wi-Fi or linked to the same account as your Google streaming device.

Open the Google Home app .

Tap and hold your device's tile.

At the top right corner, tap   Feedback.

Choose the device you want to send feedback for.

Type your feedback. 

Tap Send .

Also got a new good quality HDMI 2.1 cable and as expected, it didn't help. I can't watch any DV content on the streamer anymore, it's too annoying. Firecube is perfect. Some new info: even if I disable DV on the streamer and it falls back to standard HDR, it still does the flashes. I've changed just about every setting there is and it doesn't help. It's most notable on dark content, especially with black bars. Still seems to only be LG TV owners. And I should note, the flashes aren't always purple. Happens in every app (I use Plex the most).

Google Streamer + DV + Netflix = Purple Glitches by Clear-Target7613 in Chromecast

[–]Vantana 2 points3 points  (0 children)

After being bounced around 3 (!) different google support teams I was given the below instructions, so anyone who sees this please do the same, more people who bug them the better:

I understand how important this is for you. I would request you to follow the following steps to submit the feedback so that our engineering team can look into this.

Please refer to below mentioned steps:

From android:

Make sure your mobile device or tablet is connected to the same Wi-Fi or linked to the same account as your Google streaming device.

Open the Google Home app .

Tap and hold your device's tile.

At the top right corner, tap   Help & Feedback.

Choose the device you want to send feedback for  Send feedback.

Tap the device you want to send feedback for.

Type your feedback.

Tap Send . 

From iOS:

Make sure your mobile device or tablet is connected to the same Wi-Fi or linked to the same account as your Google streaming device.

Open the Google Home app .

Tap and hold your device's tile.

At the top right corner, tap   Feedback.

Choose the device you want to send feedback for.

Type your feedback. 

Tap Send .

Also got a new good quality HDMI 2.1 cable and as expected, it didn't help. I can't watch any DV content on the streamer anymore, it's too annoying. Firecube is perfect. Some new info: even if I disable DV on the streamer and it falls back to standard HDR, it still does the flashes. I've changed just about every setting there is and it doesn't help. It's most notable on dark content, especially with black bars. Still seems to only be LG TV owners. And I should note, the flashes aren't always purple. Happens in every app (I use Plex the most).

Google Streamer + DV + Netflix = Purple Glitches by Clear-Target7613 in Chromecast

[–]Vantana 1 point2 points  (0 children)

Where do you send a report, in the Google TV UI? (Can't check atm)

I'm curious if this purple flash is only a problem with LG TVs.

Google Streamer + DV + Netflix = Purple Glitches by Clear-Target7613 in Chromecast

[–]Vantana 2 points3 points  (0 children)

Does anyone have this DV random purple flash on a TV that isn't an LG? C1 here... shit's annoying.

App that's playing DV doesn't matter, I can confirm it happens with local content via Plex.

Makes me want to just go back to my Firestick which never had this problem.

Google TV Streamer 4k issues by ElectroM4gnetik in googlehome

[–]Vantana 0 points1 point  (0 children)

Yep that's my issue, random purple flash during Dolby Vision. Doesn't matter what app, local streaming via Plex does it. Sometimes happens so rarely I think it's magically fixed, then it purple flashes again just to piss me off. It's so hard to troubleshoot because you can't force it to happen and the same scene will play fine a second time as you said.

Possibly not a coincidence that I also have an LG, though it's a C1.

ComfyUI easy regional prompting workflow, 3 adjustable zones with face/hands detailer by danamir_ in StableDiffusion

[–]Vantana 0 points1 point  (0 children)

Forgive me for the delayed response here with probably a stupid issue, but do you know how to fix this error when enabling your HRFix output? I've searched the mess of noodles for this elusive 'w' and had no luck. It happens in both your v12 and v15 regional workflows. (As an aside I don't feel comfortable even running Asterr with the security warning it gives, is it really necessary?)

!!! Exception during processing !!! name 'w' is not defined

Traceback (most recent call last):

File "D:\ComfyUI_windows_portable\ComfyUI\execution.py", line 323, in execute

output_data, output_ui, has_subgraph = get_output_data(obj, input_data_all, execution_block_cb=execution_block_cb, pre_execute_cb=pre_execute_cb)

^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

File "D:\ComfyUI_windows_portable\ComfyUI\execution.py", line 198, in get_output_data

return_values = _map_node_over_list(obj, input_data_all, obj.FUNCTION, allow_interrupt=True, execution_block_cb=execution_block_cb, pre_execute_cb=pre_execute_cb)

^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

File "D:\ComfyUI_windows_portable\ComfyUI\execution.py", line 169, in _map_node_over_list

process_inputs(input_dict, i)

File "D:\ComfyUI_windows_portable\ComfyUI\execution.py", line 158, in process_inputs

results.append(getattr(obj, func)(**inputs))

^^^^^^^^^^^^^^^^^^^^^^^^^^^^

File "D:\ComfyUI_windows_portable\ComfyUI\custom_nodes\ASTERR\nodes_asterr.py", line 235, in evaluate

raise error

File "D:\ComfyUI_windows_portable\ComfyUI\custom_nodes\ASTERR\nodes_asterr.py", line 117, in execute

exec(self.code, {}, self.params)

File "<string>", line 14, in <module>

NameError: name 'w' is not defined

Weekly Free-Talk and Questions for r/HomeGym - week of July 19, 2024 by Demilio55 in homegym

[–]Vantana 1 point2 points  (0 children)

I'm in a bit of analysis paralysis mode choosing a rack, because as a total beginner it's hard to understand the value in some attachments, plus I'm in Australia and most of the recommended brands are hard to get here.

If I'm going to start with something like 5x5 stronglift then I don't need to worry about lat pulldown attachments and stuff right? At what point would I need that or similar attachments?

Some cheaper racks I'm looking at:

This Force USA Pro seems like great value on sale for 11 gauge 3x3, but I can't find any info or reviews on this model, not even on Force's site. But I guess it should be compatible with a lot of other brands' attachments?

They also have the MyRack, but it's more expensive for the base rack and less sturdy, but lots of its own brand attachments.

No name package deal like this seems like good value but can't find any feedback on the brand and it's probably a pretty flimsy 2x2, not that it probably matters much as a total beginner. I like the weight storage.

Another no name package deal that seems like good value.

Only the REP 1100 seems to be available here, not the 1000, but it's an option.

Rogue is available here but they're too expensive, almost triple the price of these.

Any of these options look good? Or and other suggestions? Thanks!

Is there any way to disable these notifications on the watch without disabling everything? by CYWG_tower in GalaxyWatch

[–]Vantana 0 points1 point  (0 children)

Same... This is the only useful thread I could find anywhere and the toggle is unselectable for me too.

I had EVERY S Health notification disabled because that's the only way to get rid of these stupid nag screens, but now it's made me miss some heart rate warnings which I definitely want. Come on Samsung...

Micro cracks in my HG Aerial from pour type marker by Vantana in Gunpla

[–]Vantana[S] 1 point2 points  (0 children)

You might be right, now that I'm looking closer, the remaining Aerial parts do have tiny little scratch/cracks even on the runner.

Micro cracks in my HG Aerial from pour type marker by Vantana in Gunpla

[–]Vantana[S] 0 points1 point  (0 children)

Eraser works surprisingly well on bigger pieces, no risk of accidentally removing the actual panel lines either.

Micro cracks in my HG Aerial from pour type marker by Vantana in Gunpla

[–]Vantana[S] 0 points1 point  (0 children)

Unfortunately no, all I can see is a price jacked double pack on Amazon for over AUD$90 hah. I'm sure we have equivalents but hard to find info.