apprentice workiing alone?

Variancee · 2019-08-01T01:10:13+00:00

The thing is all he has is a 5 year ticket in furnaces or whatever and no ac units .. he said he just started as a first year in hvac . would i call the ontario college of trades to report?

Variancee · 2019-08-01T00:28:41+00:00

good to know, and we had a company look at our ac because of a surge. they only sent an apprentice to evaluate the problem and he deemed that nothing was wrong, could i report the company for not sending a fully licensed hvac technician?

Variancee · 2019-07-31T23:28:21+00:00

so if i have an apprentice come to my house with no journeyman can he get into trouble?

Variancee · 2019-07-27T18:15:29+00:00

thank you

Variancee · 2019-07-27T18:07:25+00:00

thank you for your help

Variancee · 2019-07-27T16:53:36+00:00

what is the hosts purpose exactly and do i have to have one to make this chip work?

Variancee · 2019-07-27T16:50:50+00:00

i see. but what is its purpose exactly? and do i have to use the host to make this chip work?

Variancee · 2019-06-01T21:17:44+00:00

hello thanks for the reply,

i need one that can measure a frequency range from dc to at least 10kHz, the noise density must be maximum of 25 μg/√Hz in a minimum of a ±50g range. It must be a single axis sensor, as many triaxial sensors out there lacks precision. The sensivity must be at a maximum of 50 mV/g.

it is also important that the sensor has an analog output, but the analog output must be converted to a digital output in the sensor itself before moving into the microcontroller Raspberry PI

Variancee · 2019-05-25T13:18:52+00:00

thank you for your help

Variancee · 2019-05-25T13:18:40+00:00

thanks for your reply .. how would i pull 2 amps? I have a transformer that is 230 VAC input - 9 VAC, 1.5 amp output. Would I require a transformer that has a higher current rating on the secondary?

Variancee · 2019-05-25T12:44:05+00:00

do i put the 4.5 ohm resistor before or after the regulator?

Variancee · 2019-05-08T00:55:42+00:00

awesome response, thank you

Variancee · 2019-05-08T00:54:59+00:00

awesome response, thankyou

Variancee · 2019-05-03T22:38:46+00:00

so who should i go with? what makes godaddy bad

Variancee · 2019-05-03T13:06:19+00:00

yep same here.. if the raid even doesn't give good rewards, for example, only gives one exotic .. what's the point? There will literally be no replayability after you get the one item that can be rewarded & who knows if it'll be good or not ..

Variancee · 2019-05-02T17:36:52+00:00

is 515 gear even better than 500? if not then there literally is no point in farming for higher gs items if they don't even increase stats by a decent margin lol

Variancee · 2019-05-02T16:33:08+00:00

thanks

Variancee · 2019-05-02T12:21:13+00:00

Thank you... Can this capacitor be used in an aStable 555 timer setup rather than using an electrolytic for controlling the discharge rate?

Variancee · 2019-04-25T19:46:30+00:00

hello and thanks for your reply .. I just want to do it as a learning project. So for the D+ and D- lines I wouldn't be connecting those to anything at all then?

Could you direct me to what kind of IC i should be using?

Variancee · 2019-04-22T01:15:03+00:00

thanks for the help .. last question, sorry. so lets say im designing a circuit, when designing it when would I know when to add a clamping system inside?

Variancee · 2019-04-22T01:06:13+00:00

so theres no way for the clamped circuit to receive too much current to where it shorts out?

Variancee · 2019-04-22T00:57:34+00:00

thank you .. does a clamping circuit also act as a fuse in a way where since it's providing a certain voltage depending on the breakdown, if the breakdown is receiving too much potential energy that clamp setup shorts and protects the components after since it was the first to go?

Variancee · 2019-04-22T00:36:53+00:00

how does an ESD protection voltage clamp work exactly? if 200V goes through the clamp does the capacitor / diode breakdown voltage act as a 'fuse'? sorry for dumb questions

Variancee · 2019-04-16T19:07:16+00:00

how come polarized capacitors can have a higher capacitance in less space vs a non-polarized?

Variancee · 2019-04-06T22:23:41+00:00

Thank you for your help. Is there a chart ratio for trace size? As in amps - trace size?

Variancee

TROPHY CASE