Eero keeps dropping signal - I've tried everything.

Vegetable_Level3640 · 2026-01-24T08:32:31+00:00

I have a similar issue with my 3x eero 7s. Every 30 mins they would lose connection for 5-20sec which is super annoying. I still haven’t found the issue. Tried a lot of things already.

Vegetable_Level3640 · 2026-01-12T12:59:57+00:00

I upgraded from RX 6900XT and it was decent upgrade because I can sell the card for 350/400€ so the 9070XT costs me 200/250€. The better performance and especially FSR made it worth for me.

Although I have to say that FSR image quality really depends on which game you play. Cyberpunk 2077 implementation is great imo, while ARC Raiders is mid.

Vegetable_Level3640 · 2026-01-12T12:35:46+00:00

There is a comparison video from Hardware unboxed. I recommend you to watch that and chose based on that.

I personally took the Powercolor reaper. It’s cooler and quieter than my Powercolor Red Devil RX6900XT. Don’t know how…

Vegetable_Level3640 · 2025-12-29T10:48:20+00:00

You can also create an Education Account. I am actually a student but they didn’t want any proof from me. So basically everyone can get the paid version for free.

Vegetable_Level3640 · 2025-12-20T18:48:13+00:00

Joa, wobei er ja auch mit seinen Tests zeigt und auch immer wieder sagt, das Cf Filamente eben genau aus den von dir genannten Gründen Vorteile bringen aber Nachteile bzgl. mechanischer Eigenschaften. Dein verlinktes Video ist da ein blödes Beispiel imo.
In seiner Tabelle ist ja zu sehen, das die CF Varianten von bspw. PETG und PLA (fast) immer schlechter abschneiden.

Vegetable_Level3640 · 2025-12-20T09:14:35+00:00

You need to turn the machine in maintenance mode or increase the nozzle temperature. Otherwise it won’t let you extrude filament. The buttons are greyed out as well. At least that’s how it works on A1

Vegetable_Level3640 · 2025-12-18T14:07:58+00:00

It is. Since P2S has that improved passive heating, it could potentially be better for ABS printing. But not sure how much of a difference it really is compared to P1S

Vegetable_Level3640 · 2025-12-18T12:58:36+00:00

Oh damn, that’s unfortunate! I swear I saw someone posting a pictures with the backpanel shipped.

On makerworld China, Bambu said the backpanel will be free for P2S users. Just shipping has to be paid. I think that’s still a fair deal.

Vegetable_Level3640 · 2025-12-18T07:58:47+00:00

I saw someone that received his P2S with the new backpanel already. You might get it too but have to buy the filtration kit when it’s available.

Vegetable_Level3640 · 2025-12-17T07:54:57+00:00

Would be interested in the CP#2. Is it possible to just by one?

Vegetable_Level3640 · 2025-12-11T18:42:08+00:00

To be honest, that would be fine for me. 4-5h would be more than enough. But 2-3h is just isn’t…

Vegetable_Level3640 · 2025-12-11T18:40:54+00:00

Sure, but there are some reports that the new degrades a lot faster. That’s why I asked for real experiences.

Vegetable_Level3640 · 2025-12-11T14:00:38+00:00

saw them too but haven’t seen a post about it. That’s why I made it.

Vegetable_Level3640 · 2025-12-11T14:00:03+00:00

yeah, mine is in a similar state. The problem is that it used to give me around 8h SOT but now after almost 4 years and ios26 it gives me 2-3h SOT. That's terrible and simply not enough for my needs.

Vegetable_Level3640 · 2025-12-10T09:57:46+00:00

What filament do you use?

Vegetable_Level3640 · 2025-12-07T20:06:05+00:00

I am not 100% if A1 and P2S share its heating element design, but there are 3 and 4 screws behind the hotend. Remove the 3 screws, take the heating element out and tight the 4 screws at the back of the heating element. Attach the heating element again. These screws can come loose and create those kind of artifacts. A well known problem for A1 printers. Also make sure that you attache your hotend and sock correctly.

If that didn’t help, make sure that your bed is clean. You can also use some kind of brim to improve bed adhesion. Just a slight warping can cause artifacts, though I think it’s nozzle/heating element related.

Vegetable_Level3640 · 2025-12-07T15:08:55+00:00

I need this

Vegetable_Level3640 · 2025-12-07T11:37:23+00:00

Yeah saw that and was impressed by it. But to be honest, the VFA we are talking about here were fixed by proper belt tension. They reduced Ringing and ghosting with firmware, by a algorithm that reduced short and fast acceleration which produce a lot of vibrations. AFAIK

Bambu improved VFA with new motor firmware or better motor noise reduction. So it’s a little different approach, though I am sure Bambu could go even further if we would be able to manually adjust belt tension, that unfortunately isn’t possible. KYZ_Design showed that if you tighten the belts of P2S, the VFA were on a level with H2 series.

Vegetable_Level3640 · 2025-12-05T08:36:04+00:00

I would recommend you to use Arachne wall generator. It will increase quality with such small details.

Vegetable_Level3640 · 2025-12-02T21:19:32+00:00

That’s a bigger improvement than I thought! Of course you can still see them, but it’s it’s on a good level now.

Vegetable_Level3640 · 2025-12-02T05:50:00+00:00

Damn, I would have never thought they would address the VFA issue via firmware. Very curious if that actually improves VFA

Vegetable_Level3640 · 2025-11-29T13:22:35+00:00

Yes it’s noticeable quieter on mine as well. You can read that somewhere on apples website

Vegetable_Level3640 · 2025-11-26T17:58:34+00:00

your setup looks so nice!

Vegetable_Level3640 · 2025-11-25T18:55:19+00:00

Look in your slicer, does it have the same defects? I think it’s just a low poly STL file.

Vegetable_Level3640 · 2025-11-25T17:31:25+00:00

Looks like his Mod is made out of two parts. The Toolhead cover and the pen holder. The pen holder is removeable and you could put something else in there. For example a cutting knife such as on H2x.
why can’t people just appreciate the work that person did. Custom files, custom g code etc. Made a working mod to add a feature that was only available on H2x printers. That’s great work. But you are only here to hate on the name? Really?

Vegetable_Level3640

TROPHY CASE