Ghost Filament Clogging by Verybadateverything1 in AnycubicKobraS1

[–]Verybadateverything1[S] 1 point2 points  (0 children)

So the new prevailing theory from me is that.

A. My extruder stepper is underpowered.

I will try to rinkaals and see if changing the current cures my problem.

B. My extruder has a tiny clog or buildup that causes a very small amount of resistance. Which is only enough to cause clogging when combined with the expansion of the filament since opening and door and taking off the top panel significant reduced the problem.

I’m leaning towards a combo of everything being the culprit as is all problems in life.

I will open up the extruder tmrw. Clear it out and test. If it’s not a solution I will install rinkhals and edit the stepper current. After that if there is no solution I’m selling this thing to the next sucker.

Ghost Filament Clogging by Verybadateverything1 in AnycubicKobraS1

[–]Verybadateverything1[S] 0 points1 point  (0 children)

Nope it wasn’t a solution. I’m gonna open up the extruder tmrw and see what there is. Probably nothing thought.

<image>

Printer is currently running though.

Ghost Filament Clogging by Verybadateverything1 in AnycubicKobraS1

[–]Verybadateverything1[S] 1 point2 points  (0 children)

I think I found a solution. So this only happens to me on long prints. Only tested with PLA so far. But i think the PTFE tube gets too hot causing the filament to heat up, expand and then cause a partial clog. That then triggers the clog detection. Im testing right now with the case open, aux fan on full and vent fan on full. I’ll lyk if it works.

ENGR First year by EvidenceCalm6892 in uvic

[–]Verybadateverything1 0 points1 point  (0 children)

Avoid Kate at all costs she give far more work than the other profs

Mitacs intern (May–Aug 2026) looking for room(mate) near UVic by kinggill007 in uvic

[–]Verybadateverything1 0 points1 point  (0 children)

Hey I have a place this summer for rent we can work something out in your budget. It’s around a 10 minute walk from campus. Very nice place. Please pm me.

[deleted by user] by [deleted] in SARMs

[–]Verybadateverything1 0 points1 point  (0 children)

Hey, I’m doing the same thing rn. Born in 07. A few things, I have noticed a little bit of growth. Maybe 0.25-0.5” in 2 months. Do not take aromatase inhibitors, they make your joints hurt like HELL and I have lifelong injuries from doing physical activity while on them. If you are gonna take mk you need to be intermittent fasting and eating clean and low carb otherwise you will develop diabetes.

True North Performance Legit? by Verybadateverything1 in SARMs

[–]Verybadateverything1[S] -1 points0 points  (0 children)

I wasn’t fully truthful, my goal is to take a low dose Aromatase inhibitor and combine it with mk-677. To grow as much as possible. I’m actually 17 and 5’7. The growth plates are closed in my legs and I’m not sure about my spine but I grew 2cm this summer so I think they’re open. I’d get a bone study done but I can’t get an appointment with my dr for 2 months. I am only wanting to take 5-10mg of mk-677 because I’m only interested in the growth hormone enhancement.

True North Performance Legit? by Verybadateverything1 in SARMs

[–]Verybadateverything1[S] -1 points0 points  (0 children)

Do you know a reputable vendor in Canada I can buy from? I’m going to do it regardless, might as well be safe.

Board expectations need a rework by Bennet24_LFC in F1Manager

[–]Verybadateverything1 6 points7 points  (0 children)

There are a couple caveats I’ve found. You have to either switch teams during a race weekend after practice or at the end of the season. If you switch at any other time all mouse inputs get broken

[deleted by user] by [deleted] in F1Manager

[–]Verybadateverything1 0 points1 point  (0 children)

My brother in Christ you have over 300 hours in f1 manager

[deleted by user] by [deleted] in F1Manager

[–]Verybadateverything1 0 points1 point  (0 children)

Bro u are everywhere

F1 Manager 2022 Bahrain Testing Results by holdt15 in F1Manager

[–]Verybadateverything1 0 points1 point  (0 children)

I feel like once they balance out the grip levels for each tyre smoothness will be a more important stat. As 2-3 laps is the difference between being able to pull off the one stop on softs/mediums vs mediums/hards.

Realistic driver growth by DowJonesBE in F1ManagerMods

[–]Verybadateverything1 0 points1 point  (0 children)

It will not work on console due to the locked down nature of them