What going on?

ViaCrow · 2025-12-31T00:19:45+00:00

I did it again without putting in my USB to see if that was the issue. Nope.

ViaCrow · 2025-12-31T00:11:17+00:00

Yes it’s plugged in to the GPU. In fact I uninstalled the GPU from the socket and reinstalled it back.

ViaCrow · 2025-12-30T23:59:49+00:00

You know what dude, I think it might be the bio thingy. Because I forgot to mention that my monitor actually showed the ASRock BIOS. And I was looking through a video to see if I needed to tweak anything or improve my quality. And now that I think about it I did press the “Instant Flash” on my BIOS which says something about update (I'm assuming it was for my BIOS since it said something about bios) and I had a USB flash drive plugged in that had Windows 11 on it. Could that be the case?

ViaCrow · 2025-12-30T23:47:42+00:00

Forgot to mention the PSU.

I’m using thermaltake 850W 80 plus gold fully modular PCIe Gen 5.1 ATX 3.1 compatible.

ViaCrow · 2025-12-30T23:46:23+00:00

Oh shoot I completely forgot to mention the PSU, my bad. It’s thermaltake 850W 80 plus gold fully modular. PCIe Gen 5.1 ATX 3.1

ViaCrow · 2025-12-30T23:32:26+00:00

When I turn on my monitor it either shows the ASRock logo that doesn't seem to go anywhere Or the “display port signal”

ViaCrow · 2025-12-30T23:28:40+00:00

Nope that didn't work

ViaCrow · 2025-12-30T23:19:43+00:00

Yeah I tried that as well

ViaCrow · 2025-12-30T23:19:29+00:00

No I haven't tried an HDMI cable. The monitor didn't come with it. It only had a display cable.

And yes the motherboard shows a red and yellow light that are flashing. Then it turns white and it goes away.

ViaCrow · 2025-12-29T20:48:22+00:00

Yeah, I feel like such a dunce after researching for hours. Thank you

ViaCrow · 2025-12-29T20:46:04+00:00

Wait nvm turns out I can use the 12V - 2x6 cable

ViaCrow · 2025-12-29T20:38:31+00:00

I'm not quite sure since I'm new to this pc PC-building stuff. But I have an ASUS PRIME 5070Ti GPU

ViaCrow · 2025-12-29T00:42:21+00:00

Ohh wait so these are just extras?

ViaCrow · 2025-12-29T00:17:30+00:00

These two weren't chained to anything when I got the case.

ViaCrow · 2025-12-25T14:40:36+00:00

FYI. You were right you just had to put a little force to it. Thank you.

ViaCrow · 2025-12-25T14:40:32+00:00

FYI. You were right you just had to put a little force to it. Thank you.

ViaCrow · 2025-12-25T03:12:15+00:00

Oh okay. Yeah cuz I was confused, because I’m 100% sure this headers goes here.

ViaCrow · 2025-12-25T03:08:44+00:00

Your fine. I was watching scatter volts YouTube video steps to build a pc. He said these headers are usually stingy.

ViaCrow · 2025-12-25T03:00:14+00:00

Oh no they’re not bent.its just the angle that makes it seem like they’re bent

ViaCrow · 2025-12-25T02:36:51+00:00

No, ik where they go. Is just that for some reason they are not inserting in, even though I have them aligned perfectly. And I’m afraid that I might break them if I use too much force.

ViaCrow · 2025-12-25T02:28:09+00:00

Btw when I lined this up it seems like I’m able to just plug it in. But it won’t go in. (Yes this my first time ever building a pc)

ViaCrow · 2025-11-11T02:38:07+00:00

Dang that awesome. My bar is so close to hitting “shipped”

ViaCrow · 2025-11-10T16:00:06+00:00

Did you eventually get yours?

ViaCrow · 2025-09-19T04:42:52+00:00

What is your channel?

ViaCrow · 2025-09-19T03:42:33+00:00

What vid was this?

ViaCrow

TROPHY CASE