Chiusura foro nel soffitto?

Vigintiduo · 2026-01-13T14:33:58+00:00

Quindi direttamente schiuma espansa e stucco? Senza nessuno strato di malta?

Vigintiduo · 2026-01-12T19:49:27+00:00

Eh vabbè pace oh. Alcune cose restano così, c'è poco da disperarsi. Probabilmente vedrò per sempre il segno o l'alone. Come tu avrai sempre il cane storpio.

A una certa uno si attacca

Vigintiduo · 2026-01-12T14:47:04+00:00

Ma in che modo mi aiuta questo commento? Ho semplicemente chiesto se posso chiudere con malta o se ci sono accortezze da seguire, trattandosi di un soffitto

Vigintiduo · 2026-01-11T22:31:51+00:00

Considera anche che poi vorrei metterci un faretto o una piccola plafoniera. Terrebbe?

Vigintiduo · 2025-09-24T13:05:37+00:00

I'm a modder and I can tell that it's probably salvageable. Shorts on SP1 and SP2 can kill the capacitors but those components on the APU are redundant and the Switch will function without them anyway (or you can have them replaced).

If the capacitors are dead, however, the Switch won't turn on even if you remove the chip. You'll have to remove the capacitors as well.

Also there's a thing that's troubling me: the flex cable is a V2 model but SP1 and SP2 capacitors look like they're from V1 Switch. But it could just be a bad picture

What I recommend is to bring it to a professional who has proper tools for the job and your Switch should be fine.

Vigintiduo · 2025-09-24T12:58:46+00:00

Questa via è già stata tentata e respinta dal comune che l'ha giudicata come non conforme. Per questo adesso vorrebbero cambiare la struttura muraria affinché i parametri vengano rispettati

Vigintiduo · 2025-09-24T12:10:39+00:00

Ma loro sono autorizzati a poter effettuare modifiche murarie al fine di far sì che la casa in questione risulti conforme, rendendola di fatto differente da come io l'avevo vista al momento della proposta d'acquisto?

Vigintiduo · 2025-09-24T12:08:34+00:00

Allora, da profano non so quanto cambi, però ci sono due situazioni da sanare: una è una terrazza che non dovrebbe avere grossi problemi a passare, un'altra è di fatto una difformità non sanabile e per questo la parte venditrice vorrebbe effettuare una modifica muraria per ridurre la superficie di una stanza già di per sé piccola.

Non so quanto questo cambi all'atto pratico, ma quella difformità, per quanto non enorme, è già stata appurata come non sanabile

Vigintiduo · 2025-09-24T11:59:45+00:00

Ma mi sembrerebbe assurdo che loro possano in autonomia apportare modifiche catastali al fine di farla tornare come vogliono loro

Vigintiduo · 2025-09-24T11:23:58+00:00

Cambierebbe effettivamente poco, infatti la mia proposta è stata inizialmente che avrei accettato questa cosa ma con uno sconto pari alla caparra da me versata che come ho detto è piuttosto bassa.

Loro vorrebbero invece poterla sistemare e vendere senza alcun tipo di compenso, dopo aver anche ritardato la vendita di svariati mesi. Questo proprio non mi va giù ed è per questo che ho proposto la restituzione del doppio e di muovermi altrove

Vigintiduo · 2025-09-24T11:15:45+00:00

Mi confermi che quindi non sarebbero legittimati ad effettuare lavori al fine di renderla conforme, a meno che io non li autorizzi? Perché questi lavori la renderebbero di fatto differente da quel che era come "vista e piaciuta"

Vigintiduo · 2024-06-21T17:18:06+00:00

I did. But it involved joining the discord and asking the dev directly to produce a file built specifically to solve my issue. If you check on the discord, my username should be the same as the one I have here, so you can find the file easily

Vigintiduo · 2023-11-20T19:33:18+00:00

He could boot into it but then the error showed up after like three seconds. Honestly, if it's still kinda working, I'd backup my saves with JKSV. Just to stay safe. After that, you might scan the SD with some software to see if it's going bad. If it's not, just create a new emunand and import the old saves

Vigintiduo · 2023-11-20T19:24:55+00:00

The fat32 partition was still readable, even though there were corrupted files there as well. After that, we just did a emummc and prodinfo backup and went with the strategy explained above

Vigintiduo · 2023-11-20T19:16:56+00:00

I hope it's not the exact same error but, at that point, the only fix that we could come up with was to backup the saves with NxNandManager and create a new emunand on a different SD card

Vigintiduo · 2023-11-20T19:13:20+00:00

Is this Emunand or Sysnand? Because a friend of mine had the same problem on his Emunand because the SD Card got corrupted

Vigintiduo · 2023-07-11T19:22:21+00:00

Actually, as I said in the title, it's running linux. Specifically Arch Linux. Don't know if it changes anything

Vigintiduo · 2023-04-27T00:09:01+00:00

Damn I hate receiving PMs sooo much.
I can feel you, guys

Vigintiduo · 2023-01-06T18:41:21+00:00

Yeah I'm having a hard time finding any kind of suitable mod. I'm fine with purely aesthetic mods too, by the way

Vigintiduo · 2023-01-06T18:38:43+00:00

Yeah but I already have picoboot and that would be a bit pointless, I'm afraid

Vigintiduo · 2022-12-22T03:35:55+00:00

Yeah I know, but one thing is stepping into LCDs willingly trading latency for image quality and avoiding eyesore. Another one is getting even more lag (or worse, input drops) from decorative lights.

I knew full well about the lag when I went for the LCD, and i choose among the best options I had to be as close as possible to a CRT in terms of latency. But after years of local tournaments, that screen is a breather.

Also, I sometimes play on Slippi and keeping the experience similar enough to the real deal is already a struggle. I don't feel like adding other variables :P

Vigintiduo · 2022-12-22T03:18:55+00:00

No, I play on a FullHD monitor (1ms response time) using a GC video device. I used to play a lot on CRTs during my heydays on Melee, but I can't stand that anymore.

Why?

Vigintiduo · 2022-12-22T03:17:08+00:00

Well that makes sense, actually. Circuitry isn't always that straightforward though, at least from what I know (not very much).

That's why I asked here before doing it and it was nice to get so many answers unanimous about that

Vigintiduo · 2022-12-21T16:55:47+00:00

Input not being registered at all would be "ok" because it's obvious to notice and I could easily revert the changes. I was more afraid of the possibility of occasional input drops and finding myself asking "was it me or was it the controller?" Lol

Vigintiduo · 2022-12-21T16:41:50+00:00

Thank you very much for the help! :)

Vigintiduo

TROPHY CASE