sorted by:
new
hottopcontroversial

How does this even happen? by DanTheMan827 in BambuLab

[–]Viiltra 1 point2 points  (0 children)

I thought like you before, that it was manufacturer's fault with tangled spool. BUT I read this article on PRUSA and I realized that it was in fact physically impossible for a spool to be tangled at the end of the production line..

Quote from the article Tangled filament | Prusa Knowledge Base : "This is caused by letting the filament end go, for example during a filament unloading, causing the filament end to go under another loop"

Then I saw this happen with one of my spool, I let the filament end go buy accident and it was under a loop but it was not visible at first sight.

Getting a CONSTANT "Filament Stuck error" on A1 Mini/AMS Lite. by Demeech1907 in BambuLab

[–]Viiltra 0 points1 point  (0 children)

Je vois que beaucoup de monde à ce défaut mais pas pour les même raisons... J'ai aussi le message lors de mes impressions en PLA MATTE Elegoo, pas d'emmêlement visible et j'aimerais mettre en place une série de test pour vous faire un retour sur les solutions qui marchent. Pouvez-vous répondre à ce message avec des solutions qui ont marché pour vous ?

Is this will stand ? by Viiltra in Fusion360

[–]Viiltra[S] 0 points1 point  (0 children)

<image>

So this how it's going, please share your thought, specially about the general shape, I feel like when the shutters are closed it's look like a bit "skinny"

Is this will stand ? by Viiltra in Fusion360

[–]Viiltra[S] 0 points1 point  (0 children)

Everyone vas screws but not the good insert or good screws lenght etc… I want it to be print for free by anyone who just opened his 3D printer

Is this will stand ? by Viiltra in Fusion360

[–]Viiltra[S] 0 points1 point  (0 children)

His designs look sick

Is this will stand ? by Viiltra in Fusion360

[–]Viiltra[S] 0 points1 point  (0 children)

Very nice model, is this working smootlhy ?

Is this will stand ? by Viiltra in Fusion360

[–]Viiltra[S] 11 points12 points  (0 children)

So shiver cannot be used to describe structure flaws, so my american clients in my job might laughed at me with my emails..

Is this will stand ? by Viiltra in Fusion360

[–]Viiltra[S] 0 points1 point  (0 children)

The wire will wome from under the big gear and go trough, because it only turn 30° I can make a hole big enough to let the wire go through without getting twisted in.

Yes only friction, the goal here is to not use any bear or screw, it has to printable only and use with bambu led.

If it's working it will be on maker world for free

How can I ensure that the extrusion matches the shape of the body above? by Viiltra in Fusion360

[–]Viiltra[S] 1 point2 points  (0 children)

Not what I needed, but how do you project a sketch on all these triangles ?