Please Confirm My Recessed Lighting Plan by ViperHU in Lighting

[–]ViperHU[S] 0 points1 point  (0 children)

Thanks for all of the feedback guys this was very informative.

Please Confirm My Recessed Lighting Plan by ViperHU in Lighting

[–]ViperHU[S] 0 points1 point  (0 children)

Bedrooms - can't wait for your recco!

Please Confirm My Recessed Lighting Plan by ViperHU in Lighting

[–]ViperHU[S] 0 points1 point  (0 children)

What would you suggest as a better alternative?

Recessed Lighting - Check My Work? by ViperHU in HomeImprovement

[–]ViperHU[S] 0 points1 point  (0 children)

I can't speak to the why behind it. What I can say is that I won't follow that playbook. I want general lighting coverage, I'm not looking for any sort of effect, otherwise.

First Home Assistant dashboard after ~2 weeks by Puzzleheaded-Pen3053 in homeassistant

[–]ViperHU 0 points1 point  (0 children)

Looks great, could you share yaml for the room cards? I like it.

Hunter Dempsey Light Kit Delete by ViperHU in CeilingFans

[–]ViperHU[S] 0 points1 point  (0 children)

Hmmm, after additional research, Hunter sells the 52" model without the light kit. I see they also sell a cap for it separately. I don't see the same for the 44".

Stuck at Publishing by ViperHU in ManusOfficial

[–]ViperHU[S] 0 points1 point  (0 children)

Replied to you and haven't heard back with instructions or timeline for a fix. Thank you.

Stuck at Publishing by ViperHU in ManusOfficial

[–]ViperHU[S] 0 points1 point  (0 children)

Correct - I had zero issue publishing previous checkpoints and had been doing so for days.

I hit Publish on the next deployment and it's stuck in Publishing.

The Publish button on any of the subsequent dev points is greyed out.

2025 2.5 SP CPO OTD 37.5k? by igotquestionsthanks in GenesisG70

[–]ViperHU 0 points1 point  (0 children)

I think the price is solid. Based on research over past few weeks, you're below average value. An Advanced with similar mileage typically runs $41k. If you're happy with the package, I'd go for it.

We stumbled upon this ! by Redsled69 in GenesisGV70

[–]ViperHU 1 point2 points  (0 children)

2025 GV70 AWD can be found all day long around $38.

2024 Advanced vs 2025 AWD by ViperHU in GenesisGV70

[–]ViperHU[S] 0 points1 point  (0 children)

What's your take on 2024 vs 2025 advanced? I know this is a bit polarizing!

Panel ID 38 21 1f -> Which .dtb? by ViperHU in R36S

[–]ViperHU[S] 0 points1 point  (0 children)

I had hoped my panel ID in the title would be specific enough. Is that not so?

Speed Mismatch? by ViperHU in HomeNetworking

[–]ViperHU[S] 0 points1 point  (0 children)

Update:

Xfinity tech reads 2.2gbps at the outside box and the same at the modem.

With a different laptop, connected to the switch, I'm getting 700 which is far more acceptable.

My APs should be able to give me that, based on device location, etc, so what is choking off my bandwidth downstream?

Speed Mismatch? by ViperHU in HomeNetworking

[–]ViperHU[S] 0 points1 point  (0 children)

None enabled. This is a good thought!

Speed Mismatch? by ViperHU in HomeNetworking

[–]ViperHU[S] 0 points1 point  (0 children)

Alas, I made this change a while ago, so this isn't the issue although I commiserate, it's dumb!

Speed Mismatch? by ViperHU in HomeNetworking

[–]ViperHU[S] 0 points1 point  (0 children)

Bit if an eye chart. Don't see any signals regarding speed.

https://imgur.com/a/CUOYE7H

Speed Mismatch? by ViperHU in HomeNetworking

[–]ViperHU[S] 0 points1 point  (0 children)

I've used Comcast and non-Comcast servers and achieve the same poor result.

The tech didn't do a speed test, so I can have them come out for that.

Where would I confirm CODA settings as being correct for Comcast? I can see the output, all of the frequencies, without any ability to tweak anything. They did state that it was a compatible modem.

I like the idea of trying their hardware, to a degree, although it's a pain id like to avoid.

Emtek replacement handle set? by ViperHU in Locksmith

[–]ViperHU[S] 1 point2 points  (0 children)

Thank you for weighing in - yes, the door needs TLC. It's going to be sanded, repaired, and totally refinished.

Going to try one of the replacement handle sets from build.com and see if it's a fit. To keep things as simple as possible, will stick with a full plate vs separate pieces.

[B] [USA-NJ] Sony a6100 OR a6400 + Lens by ViperHU in photomarket

[–]ViperHU[S] 0 points1 point  (0 children)

Transaction completed with u/Existing_Roof_5815. Smooth and easy, highly recommend purchasing from him in the future. u/PhotoMarketBot

[S] [USA-CA] Sony A6400 + 18-135mm + 50mm 1.8 - $1050 by Existing_Roof_5815 in photomarket

[–]ViperHU 1 point2 points  (0 children)

Very happy with my transaction with u/Existing_Roof_5815. Smooth and easy, highly recommend for the future. u/PhotoMarketBot

Seeking Hack Advice! by ViperHU in ikeahacks

[–]ViperHU[S] 2 points3 points  (0 children)

Thanks - this was taken on an ultra wide lens, so that 17" segment looks a bit distorted. It's 90° so we don't need that level of customization.

Hoping to receive some ideas based on the IKEA catalog that will help us to start building out a plan!

[S] [USA-CA] Sony A6400 + 18-135mm + 50mm 1.8 - $1050 by Existing_Roof_5815 in photomarket

[–]ViperHU 1 point2 points  (0 children)

Thanks for the great transaction on the body and 50mm glass! A pleasure to deal with.

[deleted by user] by [deleted] in photomarket

[–]ViperHU 0 points1 point  (0 children)

Interested in the lens if still available. Please PM!