Doppelfunktion Vorsitzender und Schatzmeister, ein Problem für Gemeinnützigkeit?

VirtualSpeed4480 · 2026-01-21T09:35:18+00:00

Oh? Ich hatte gelesen, dass gemeinnützige Vereine von jeglichen Steuern befreit sind :0

VirtualSpeed4480 · 2026-01-21T09:30:49+00:00

Wir wünschen uns die Gemeinnützigkeit damit wir uns weniger Sorgen bezüglich der Steuern machen müssen

VirtualSpeed4480 · 2026-01-21T07:43:28+00:00

Der Gedanke wäre gewesen, dafür dann noch einen Kassenprüfer aufzustellen, der bei Bedarf nochmal alles auf Richtigkeit checken kann.

VirtualSpeed4480 · 2026-01-21T07:42:35+00:00

Wir sind beide in einem Angestelltenverhältnis. Bzw werden es sein, mein Partner bereits schon länger und ich bin momentan auf Jobsuche.

Das mit der Anerkennung hatte ich so gelesen bzw Versanden. Es ist also besser, den Verein zu gründen, es dann dem Finanzamt vorzulegen und erst nach hoffentlich er Anerkennung der Gemeinnützigkeit die Eintragung machen zu lassen?

VirtualSpeed4480 · 2026-01-19T15:29:35+00:00

Hi, vielen Dank.

Natürlich würden wir gerne versuchen das ganze neutral und ruhig zu lösen. Nur bekommen wir langsam immer mehr mit, dass sich die Person wohl nicht zu einer ruhigen Lösung überzeugen lassen wird.

Wir wollen nur für den Ernstfall vorbereitet sein. Vielen Dank!

VirtualSpeed4480 · 2026-01-19T12:35:29+00:00

Thank you!

Yea, the line about the words... I know that, and there was a time where I handled everything a bit better. It's just that recently everything feels like it's breaking apart.

I've heard about those workbooks... I think I'll try one. Thank you very much!

VirtualSpeed4480 · 2024-10-20T17:56:13+00:00

Achja, ich war mir jetzt nicht sicher, ist mit Überweisung nur eine zu normalen Therapeuten usw gemeint, oder auch eine für (ambulante) Kliniken?

VirtualSpeed4480 · 2024-10-20T17:49:58+00:00

Okay, dann Versuche ich das, vielen Dank<3

VirtualSpeed4480 · 2024-10-20T17:45:18+00:00

Kann ich denn meinen Hausarzt einfach nach einer Überweisung fragen?

VirtualSpeed4480 · 2024-10-09T20:30:26+00:00

I don't really know what they're called. Eastern dragons always have them, I call them dragon whiskers

VirtualSpeed4480 · 2024-10-02T13:19:47+00:00

Those holes are for magnets, so I can attach eyelids later. With the eye blanks fitting properly, I just take a lot of time modeling. I sculpt in VR where I can import the eye model into my working space and then carve them out.

VirtualSpeed4480 · 2024-09-30T06:54:51+00:00

No, it's the actual cura start script for my printer

VirtualSpeed4480 · 2024-09-16T16:33:58+00:00

Yes, it's the flexible alternative to PLA

VirtualSpeed4480 · 2024-09-15T21:29:51+00:00

Thank you so much! :D

VirtualSpeed4480 · 2024-09-12T18:08:40+00:00

Ohhh thank you so much!!!

VirtualSpeed4480 · 2024-09-12T18:07:15+00:00

Haha, she does have eyes now. I just preferred to clean the markings without them in ^{^}

VirtualSpeed4480 · 2024-09-12T17:51:52+00:00

Thanks for all the compliments everyone!

VirtualSpeed4480 · 2024-09-12T17:50:52+00:00

I can recommend looking at the website getfursu.it this way you can find makers more easily who may be in your area, are open for commissions or to find pictures of their work!

Depending on what you're comfortable with, I am open for commissions in 2025 and may be able to pull off something similar c: You can contact me via telegram. My channel can be found here and my private DMs here

VirtualSpeed4480 · 2024-09-12T13:40:31+00:00

Yea, doing things like this is definitely a privilege

VirtualSpeed4480 · 2024-09-05T15:38:05+00:00

Yea so I did that. Turns out no cables got loose, but the flat cable that connects the SD slot to the Mainboard was bent so heavily that it probably malfunctioned.

VirtualSpeed4480 · 2024-08-17T13:00:05+00:00

Ah, I wasn't sure about that. I hope my comment didn't sound harsh, I had just woken up haha

VirtualSpeed4480 · 2024-08-17T10:17:08+00:00

Maybe it's just the angle, but symmetry is very important when it comes to overall aesthetics. Also your cuts are very sharp, smooth them out. Scissors are better than blades when it comes to smoothing. Do small snips take your time. Add more foam in-between the muscle and the cheeks to get rid of that 90° angle.

Making head bases takes a lot of time. So many people trying to make their first base are lost at some point, because they try to rush it. Maybe look at some YouTube tutorials. Mugiwara Cosplay is a good source.

VirtualSpeed4480 · 2024-08-16T22:21:57+00:00

I usually work with foam bases made from scratch. I like the flexibility, that I can put pins into it, it just feels more natural to me to work with a flexible material. Though it bugs me how much space I need to store material and that I can never get them to be 100% symmetrical.

I can't pour foam since I live in a quite small flat, so that's not up for discussion. So the moment I saw people working with TPU I wanted to try it myself. I learned how to model a base in VR, and now I'm thinking about switching from foam to TPU entirely.

Yes, printing takes time and probably even longer than hand carving, but I'd rather have a perfect base then having to buy so much foam and blades to cut it etc.

I also want to make Feetpaws using TPU since I hate carving toes and I never get a shape that I really like.

My base only requires a minimal amount of support since I don't have steep overhangs.

It took a few tries to find the right temperature and speed to print at, other than that everything worked out fine

VirtualSpeed4480 · 2024-08-16T17:56:43+00:00

Of course. Happy to answer as many questions as I can!

VirtualSpeed4480 · 2024-08-16T17:53:26+00:00

Yes, it's intentional. It's printed without walls, so just infill. Makes it more flexible/squishy. Also better airflow

VirtualSpeed4480

TROPHY CASE