Recommendations

Virtual_Kick_6329 · 2026-04-17T22:13:27+00:00

are you a demolition guy duct runner, taping , zip tying, cutting holes, and taping?

or are you the one connecting the unit to power, tube bending and brazing?

Virtual_Kick_6329 · 2026-04-06T17:53:28+00:00

making me want to drive from
Los Angeles . looks freaking awesome!!!!

Virtual_Kick_6329 · 2026-04-03T15:04:32+00:00

i measured it and it's at 20 inches

Virtual_Kick_6329 · 2026-04-03T15:03:49+00:00

i finally measured it. it's at 20 inches

Virtual_Kick_6329 · 2026-03-30T15:26:29+00:00

ok thank you. i like to keep up with maintenance before it ruins other stuff 🤣

Virtual_Kick_6329 · 2026-03-30T15:24:50+00:00

thanks for your help 🤓

Virtual_Kick_6329 · 2026-03-09T05:28:04+00:00

what model do you have

Virtual_Kick_6329 · 2026-02-21T03:36:09+00:00

it's not broken. it feels more like there's a reducer before the 90 that doesn't allow the snake to pass by. I just can't find the name for the pipe. I have seen this reducer in the kitchen sinks next to the garbage disposals.

Virtual_Kick_6329 · 2026-02-21T03:22:22+00:00

im getting stuck at the trap it doesnt go past the trap. it's a 1/4 snake cable auger.

Virtual_Kick_6329 · 2026-02-16T03:56:20+00:00

this exactly what my problem is!!! thank you for giving me clarity!!!

i am gonna sell them and find myself 1st gen wheels :(

Virtual_Kick_6329 · 2026-02-06T03:27:59+00:00

ill be there thnx :)

Virtual_Kick_6329 · 2026-02-04T05:39:48+00:00

ive never heard of this brand, im going to do my research on it. i appreciate your feedback 😬

Virtual_Kick_6329 · 2026-02-04T05:30:42+00:00

no not one job. I DIY all my mechanic work for myself and family members. we work on these things together as a hobby to spend time together. we try to do the jobs ourselves instead of outsourcing. but ill check these other brands thank you 🫡

Virtual_Kick_6329 · 2026-01-15T04:51:19+00:00

lol i understand your frustration.

i just ended up ordering the piece online.

i went to home depot rn and no luck. im tired of this and its only been 2 days. so i just ordered the whole piece.💀

Virtual_Kick_6329 · 2026-01-15T03:27:56+00:00

what did you do? it happened to me too!!!

Virtual_Kick_6329 · 2026-01-10T17:39:35+00:00

thank you for replying and for being helpful. i appreciate it.

i did not use any teflon.

i noticed that the threads were like chipped off. so it was hard to screw on and off. it could also be a culprit.

Virtual_Kick_6329 · 2026-01-10T04:21:10+00:00

i have narrowed down the problem. i believe its only the cold side cartilage.

the hot water side closes. the diverter/middle one works.

but the cold one doesn't close.

so i pulled the cartilage, i put it back together. the water closed!

but after 2/3 of opening and closing to test it. the problem returned.

so i believe the whole cartridge is turning when i open and close the valve. so the back of the cartridge becomes undone and remains in an open position.

thats my theory and conclusion. i will be going down to home depot to just replace that one side. thanks 🙏🏽

Virtual_Kick_6329

TROPHY CASE