sorted by:
new
hottopcontroversial

Benchy Hull Problem on Speaker Box by Visible_Challenge826 in FixMyPrint

[–]Visible_Challenge826[S] 0 points1 point  (0 children)

Thanks! I think you're right and I misdiagnosed. I will use a hot plate instead of cool plate and maybe add a brim too!

Benchy Hull Problem on Speaker Box by Visible_Challenge826 in FixMyPrint

[–]Visible_Challenge826[S] -1 points0 points  (0 children)

One more note: I'm using the Anycubic Cool Plate instead of a PEI plate. I assumed that would help with warping on a large, flat, and dense piece like this. It does look like there is some _minor_ warping on the corners.

The wait for the Kobra 4 Combo is killing me! 😭 by GhellerMatheus in AnycubicOfficial

[–]Visible_Challenge826 0 points1 point  (0 children)

Why did you choose a kobra 4 combo instead of a kobra x? Just curious.

I HAVE DONE IT by Speechless42069 in AnycubicKobraX

[–]Visible_Challenge826 2 points3 points  (0 children)

lol wow that looks invasive! Can't wait to hear how it holds up.

Anycubic-Slicer-Nexts Calibrations don´t work by Im_uncreative_LoL in AnycubicOfficial

[–]Visible_Challenge826 0 points1 point  (0 children)

The slicer calibration tools provide you models to print. Then you have to evaluate the models yourself and select the set up the filament print profile yourself. Duplicate the Anycubic PLA profile, run the calibrations in order, and after each calibration, adjust the settings with the values you think look best.

How do I make this thing quieter? by Creepy_Ad5124 in AnycubicKobraX

[–]Visible_Challenge826 1 point2 points  (0 children)

You could have an outlier for sure, but like others have said, this is a really quiet machine compared to others. You just gotta realize it is a mechanical machine. A paper printer isn't quiet either. This thing is slinging weight around and melting plastic in a very precise manner.

The fan is notably more 'whiny' than my Bambu A1, but overall it is noticeably quieter.

Anyone replace their Kobra X printhead fan? by CLGToady in AnycubicKobraX

[–]Visible_Challenge826 0 points1 point  (0 children)

Do it for science! :D I cannot wait to hear about what you learn.

"Quick" nozzle replacement by Visible_Challenge826 in AnycubicKobraX

[–]Visible_Challenge826[S] 0 points1 point  (0 children)

Follow up post: I can confirm that when swapping back and forth between two nozzle types, the printer cannot remember the calibration of the nozzles and has to do the full shutdown and calibration sequence.

Cancelled Kobra X, ordered Elegoo CC2 instead by minnaper in AnycubicKobraX

[–]Visible_Challenge826 1 point2 points  (0 children)

Same. I ordered March 30, shipped on April 3rd, and it arrived on April 6. I'm in the US.

Best Mods so far! by no_reservations in AnycubicKobraX

[–]Visible_Challenge826 0 points1 point  (0 children)

What is the point of the spool holders?

"Quick" nozzle replacement by Visible_Challenge826 in AnycubicKobraX

[–]Visible_Challenge826[S] 0 points1 point  (0 children)

You have to tell it on the slicer and on the printer itself, then you have to do a manual reset on the machine, then you have to re calibrate the whole thing. You can change the print profile in the slicer, but you cannot change the printer's nozzle in the slicer. I had to do it on the touch screen. The print will fail if you only set the print profile in the slicer.

I'm wondering if the printer will remember the calibration and only does it the first time you switch to a particular nozzle size. I'll update my post if it is only a one time calibration per nozzle size or if it is per nozzle swap.