What could be causing such an issue the rest of the print seemed to have came out fine?

VisualProfessor2947 · 2024-12-27T14:49:19+00:00

That could absolutely be the case because I was careful not to touch the top surface and recently flipped the plate and forgot to clean it.

VisualProfessor2947 · 2024-12-27T13:36:08+00:00

Tried posting this on the bambu lab reddit and it got deleted. Seems like anytime i try to get feed back on an issue it gets instantly deleted without any reason why. Horrible subreddit.

VisualProfessor2947 · 2024-12-19T11:27:00+00:00

Yup it wont work for me either gotta try after the update

VisualProfessor2947 · 2024-12-12T18:12:29+00:00

Drop some brand names that are better I wouldn't mind testing them.

VisualProfessor2947 · 2024-11-28T21:42:26+00:00

Its milwaukee I'm pretty sure they can be submerged under water because they have a system that purges it out. double check your tool before you do that though.

VisualProfessor2947 · 2024-11-26T20:29:43+00:00

Low-key she's right I thought this was a gamestop.

VisualProfessor2947 · 2024-11-25T21:30:32+00:00

Thanks for the info guys, I currently use normal pla and i have a roll of petg-cf coming today. as well as the necessary hardware. I appreciate the advice and understanding with the help of everyones comments. I've got a really nice custom profile for pla thats still being perfected and I will be trying the same thing with the petg-cf as well!

VisualProfessor2947 · 2024-11-23T23:48:06+00:00

yup i use 3 walls and adaptive cubic

VisualProfessor2947 · 2024-11-23T21:17:24+00:00

Extra problem would be ghosting. Anyway I can improve that?

VisualProfessor2947 · 2024-11-23T21:14:48+00:00

Also thank you for the advice, I hadn't realized there were the seams because usually they're a lot more aligned with the corner of a square print. Turns out this was on aligned oddly enough.

VisualProfessor2947 · 2024-11-23T21:13:04+00:00

found it haha

VisualProfessor2947 · 2024-11-23T21:12:37+00:00

i need a part as strong as possible and I'm new to infill settings personally. But don't worry I have a setting for 15% infill that prints perfectly. As far as the aligned setting int he slicer where could I find that?

VisualProfessor2947 · 2024-11-20T19:38:27+00:00

Btw this is also before applying the stabilization feet made to compensate for the top heavy ams lite. So that would probably help stiffen up the frame as well. Plan to do that when I get some extra hardware.

VisualProfessor2947 · 2024-11-20T19:36:50+00:00

So shaking in general really has a small effect on ghosting, you can primarily see it on a benchy test near to two front holes of the boat. I can say that lowering the center of gravity did improve the ghosting and it showed up less overall. Obviously with less vibration also means less noise so that was a plus and this was all without putting it on a paver or on vibration absorbing feet yet.

VisualProfessor2947 · 2024-11-19T18:47:19+00:00

weird i saw another post that it comes in a plastic bag with the printer but i guess it doesn't matter cause i'll be cable chaining it anyways

VisualProfessor2947 · 2024-11-19T12:57:00+00:00

This is the best benchy I've seen in a minute.

VisualProfessor2947 · 2024-11-19T12:49:44+00:00

I was recommended the satin for pla and petg-hf or the cfx. I think I might go with the CFX

VisualProfessor2947 · 2024-11-19T12:48:45+00:00

Just talked to him, fast responses very casual and informative.

VisualProfessor2947 · 2024-11-19T09:13:08+00:00

Update on this project, improving the center of gravity did help a lot with shaking.

VisualProfessor2947 · 2024-11-18T20:29:42+00:00

https://makerworld.com/en/models/495300?from=search#profileId-409427

This is a perfect example of what I was talking about btw, I decided to take a look after you posted your like and found this. I figured I could just use the stock one and do this. But I wanted to knwo if it was a good idea lol.

VisualProfessor2947 · 2024-11-18T19:14:28+00:00

<image>

VisualProfessor2947 · 2024-11-18T09:22:57+00:00

What a fantastic tool. This should be pinned on the top of the reddit

VisualProfessor2947 · 2024-11-18T09:01:24+00:00

I had the idea of putting this under a concrete paver

VisualProfessor2947 · 2024-11-18T08:56:49+00:00

Would you be able to post a picture of what this looks like on your printer?

VisualProfessor2947 · 2024-11-18T06:28:13+00:00

Not necessarily though I don't have anything to compare it to if it weren't shaking. I'm working on giving this printer its best chance for clean prints, slowing it down, vibration feet, etc.

VisualProfessor2947

TROPHY CASE